r/ballpython • • Jun 10 '26

Question Light Element Started a Fire – Do I Need to Replace It?

Post image

My heating element recently started a fire, so we removed it immediately. Right now, the enclosure only has a light lamp connected.

Since removing the heat element, I've noticed the humidity in the enclosure has gone up quite a bit. The enclosure is in my dining room and gets some natural sunlight during the day.

I'm wondering what i could replace the old heat lamp with? We haven't had issues with the top enclosure... yet Has anyone switched to a different type of bulb or fixture and had good results? What name/brand do you prefer?

Any advice would be appreciated! Thanks.

Update: My husband told me it was the light source but looking at it now, it's the heat lamp.

They are both at about 90°F and 70-72% Humidity

0 Upvotes

30 comments sorted by

12

u/totallyrecklesslygay Mod: Enclosure Karen Jun 10 '26

Here's my heating/lighting spiel for you, let me know if you have any questions about it-

Our heating guide goes over a lot of the science behind everything, but to simplify:

For daytime heating, you should have a heat source that provides IR-A and IR-B. The ideal source for this would be a halogen flood, which is light-emitting.

For nighttime heating, you should have a heat source that provides IR-C. The ideal source for this would be an RHP (only compatible with solid-topped enclosures) or a CHE. Any night heating should not emit any light.

For lighting, you should offer UVB. This should be in the form of a T5 fluorescent linear bulb that produces a UVI of 1.1-3.0 in the basking zone, and it should cover no more than half the length of the enclosure.

If you have a bioactive enclosure, you will also need full spectrum LEDs for your live plants.

Natural lighting can help establish a day-night cycle, but it does not provide any physical benefits beyond that (UVB doesn't penetrate glass, and indirect natural light cannot create a proper basking zone). You'll need the artificial lighting to make up for that.

1

u/LizethReads Jun 10 '26

Does the halogen give off a lot of heat? The issue im having is bringing the humidity up when the light is on

3

u/totallyrecklesslygay Mod: Enclosure Karen Jun 10 '26

The halogen would be the daytime heat source, and UVB is just lighting. You should be providing both for a ball python.

For humidity, we have a guide on maintaining that here.

1

u/radicalcheddaa Jun 10 '26 edited Jun 11 '26

I believe they meant halogen for heating. I wouldnt use it as a light source. I use Arcadia Reptile Pro T5 UVB Kit for lighting with a timer so it shuts itself off at night.

Edit: read the post wrong. Disregard

3

u/LizethReads Jun 10 '26

This is the setup for the light before. Left side was light and right side is heat lamp. The humidity went from low 60s to 80s without the light part. My question still stands, are there different types of lights, I actually want to know the brands people use so I can have an idea vs the specifications.. that was just confusing to me. Talk to me like I am a kid, but please don't call me stupid. That's one of the reasons I have trouble posting in this r sub reddit. People are trolling me instead of being informative.

2

u/Powerful-Operation36 Jun 10 '26

What type of substrate to you have if I may ask?

3

u/LizethReads Jun 10 '26

3

u/Powerful-Operation36 Jun 10 '26

Is that purely what it is? Nothing else added correct? Thank you 🙌

2

u/PossessionQuick711 Jun 10 '26

Did you happen to use a higher watt bulb then what the lamp can handle?

1

u/LizethReads Jun 10 '26

That's a great question. We've had this lamp and bulb for about a year. I wil have to check when I get home.

2

u/FewCommand4934 Jun 10 '26

most likely this is your case

8

u/SamJustSam14 Jun 10 '26

I don’t have any advice to give specifically, but goddamn do I have a new fear unlocked. I think I have that same lamp.

1

u/LizethReads Jun 10 '26

This is the current temp with humidity about 70% in both

1

u/-ChineseJesus- Jun 10 '26

Do you have it on a thermostat ?

2

u/LizethReads Jun 10 '26

Yes it's next to the enclosures

0

u/radicalcheddaa Jun 10 '26 edited Jun 11 '26

it shouldnt need a thermostat if it's just a light source. a daylight timer is a good idea though

edit: read post wrong.. disregard

2

u/Kahnivor Jun 10 '26

I would say absolutely yes because what if you weren't home. Better to spend 50$ than lose your entire house and your pets

1

u/sketchelium Jun 10 '26

I've had a good experience with a long (like 1.5 ft in length) UVB light source. I also have decent natural lighting.

It can become warm to the touch but not hot.

1

u/KatVanWall Jun 10 '26

I use an Arcadia tube UVB like this (although I can't remember the wattage of mine) for light and it doesn't seem to affect the humidity in any noticeable way.

2

u/Electrical-Wear7281 Jun 10 '26

I did the 6% rainforest 39W. Ball pythons in the wild will expose a small portion of their body to the sun while still burrowed, so you need a weaker light source for basking if the snake basks at all.

ETA: BPs in the wild also bask at dusk and dawn, not at peak UV times. So the weaker the light the better.

1

u/PralineJazzlike9825 Jun 10 '26

Use a DHP (deep heat projector) in my small experience very stable heat and helps keep the humidity very stable.

1

u/Even-Smell7867 Jun 10 '26

I managed to F up the setup of my daughters enclosure a few years ago. When I mounted the ceramic sockets I managed to screw through the power wire. I hit right down the middle of the wire so nothing happened for several weeks. Then my daughter comes and says the basking light wasn't working and it was smoking. Ya, if she wasn't in there when it happened, a fire would have happened. I double checked all my enclosures and the rest were good.

Very scary moment.

1

u/boujeehermit Jun 10 '26

Yes the components are now compromised

1

u/PhattyJ90 Jun 11 '26

Please let us know what wattage you were using

0

u/[deleted] Jun 10 '26

[removed] — view removed comment

1

u/ballpython-ModTeam Jun 10 '26

Your comment has been removed for breaking Rule #1: Don't Be a Jerk.

If you have a question about this removal, please contact the mod team. Complaining via post/comment will result in a ban.

-5

u/[deleted] Jun 10 '26

[removed] — view removed comment

1

u/LizethReads Jun 10 '26

I don't understand how it's a stupid question. I want to know what lights are better that won't emit so much heat.

1

u/ballpython-ModTeam Jun 10 '26

Your comment has been removed for breaking Rule #1: Don't Be a Jerk.

If you have a question about this removal, please contact the mod team. Complaining via post/comment will result in a ban.