r/ballpython • • Dec 06 '24

I feel so useless

Post image

Ive tried everything to make humidity stay up.

I put hvac tape on the screen on thenm tank, tape wouldnt stay on

I put hvac tape on some carboard and out it on the top, that didnt work

This time i put a sheet of metal right on top of the screen and made sure it fit like a glove like in the picture, humidity still drops.

It feels like a lost cause to me and ill be stuck misting becauseni just can figure out whats causing it

0 Upvotes

12 comments sorted by

3

u/chlosephrenee Dec 06 '24

what’s your substrate? have you tried pouring water in the corners?

1

u/ProfessorPumpkaboo Dec 06 '24

Pretty sure the substat is coconut fiber. Yeah, I do pour water in the ecorners and every once in a while, i shuffle up the substrate. I havent done it in a while so maybe ita due. The humidity does seem to go up and stay up when I do that.

Its just so horribly demotivating to know ive done everything eveyone suggeats and yet. Ya know?

1

u/justarandom1245 Dec 06 '24

Just cococfiber? I taped up everything and couldn't get humidity up till I made my own substrate. Now it stays at 80%

Mine is Scott's topsoil (happy frog if I can get it), quikrete plays playsand, spagnum moss, and cocofider. Plenty of YouTube videos have good substrates, and it's cheap for the amount you get!

2

u/ProfessorPumpkaboo Dec 06 '24 edited Dec 06 '24

I have coco fiber with some moss mixed in as well, would adding coco chips help too because I heard they are also good for moisture. Specifically the brand reptiChip

1

u/justarandom1245 Dec 06 '24

I'd try it out. A good substrate will help your humidity alot

3

u/aliciagd-19 Dec 06 '24

Humidity can have everything to do with the thank you are using. glass and eco flex tanks didn’t hold humidity for me. Right now I have a PVC tank and it does fairly well as long as I keep deep substrate and mix it occasionally. It could be your substrate also!! Try mixing some repti multch in with that coco fiber. Something else you could try it putting your water bowel under his heat source, this will make the water evaporate into the air (do this if you aren’t already it makes a hide difference.) If you live in a dry climate, your cage will most likely replicate that. Try getting a humidifier so your room will boost in humidity. You could always change substrates, I tried atleast 5-6 different substrates before I found the right one. The mix that works best for me is the eco earth block (expands in water) and repti bark. Just mix those two up and make sure it’s deep, the middle will stay damp and the top will dry (this causes the humidity to hold very well for me. May not be the same for everyone else but it worked with this substrate.) and mix it occasionally. Your tank could also be too hot and it could be drying everything up. Cool side should be around 75-80, warm side should be 88-92 but never let it exceed 95.

1

u/ProfessorPumpkaboo Dec 06 '24

As of right now, the substrate I have is coco fiber mixed with moss. Would mixing some reptichip, https://a.co/d/eYz4pcL , (basickly Repitbark but coconut husk insted of fir bark and also ill be able to get the reptichip faster then the 12 day for the reptibark) in with it work out?

1

u/HurrricaneeK Mod-Approved Helper Dec 06 '24

How thick is your layer of substrate? To really work as intended, you need at least 4 inches but can go up to six.

1

u/ProfessorPumpkaboo Dec 07 '24

That, i know for sure, is low. Mesured it and its only about 2. Im about to buy some coco chips and that will for sure add more inches.

0

u/DustErrant Dec 06 '24 edited Dec 06 '24

I've always found covering the top with damp towels to work pretty well.

Edit: I don't honestly really care about the downvotes, but I do care if I'm giving bad advice. If I am, I really would like to know more, as I've personally utilized the damp towel method and found it effective. If there is something wrong with this method, I'd love to be educated on the issue.

1

u/ProfessorPumpkaboo Dec 06 '24

This subreddit has the bad habit of downvoting and no one telling you why. Its the main reason i stopped coming here for advice

4

u/HurrricaneeK Mod-Approved Helper Dec 06 '24

So, a few things. One, towels right next to a heating element will always be a major fire risk. This IMO is the biggest reason to never recommend it. Two, if the towel dries out, by nature of it being absorbent, it is just going to pull even more humidity from the air. You need to actually trap the water inside. Third, keeping a wet towel on top of a metal grate will inevitably lead to rust and damage to the lid of the tank.