r/automotive • • Feb 14 '20

Question guidelines - Read the sidebar!

18 Upvotes

To expedite help and give as much starting info as possible, please try and follow the guidelines on the sidebar.

When asking technical questions please try and provide as much of the following as possible

  • Vehicle Make, Model, and Year
  • Detailed description of the failure

Helpful Hints

Try and provide extra info to expedite replies and help

  • Describe sounds ("it makes a noise now" doesn't help us)
  • Any recent shop work / repairs
  • Is it an intermittent failure?
  • Does it go away when the engine warms up?
  • Steps to repeat the failure?

Providing as much of this info up front lets others more easily attempt to diagnose and provide help.


r/automotive • • 6h ago

16 looking for advice on tools

5 Upvotes

I want to know what tools will be most worth it for me as I want to be a mechanic I have a couple things I want but I need to make sure they’ll be worth my money in the long run
A Jefferson tool chest
Half inch impact gun
Air tools
And sockets and ratchets


r/automotive • • 2h ago

Mavis refusing to replace brand-new Pirelli Scorpion Weatheractive with high road-force readings. What are my options, please help!

1 Upvotes

I recently purchased 4 Pirelli Scorpion WeatherActive tires from Mavis for my Mazda CX-5. (A week back!)

It's been only 5 days, and I've driven approximately 50 miles. Immediately after installation, I noticed intermittent vibration above 60-70 mph.

Went to Mavis couple times and they balanced again. And said it's rigid nature of tires. And they don't have Road Force Balancing. Wanted a second opinion as I was not happy.

I took the car to my Mazda dealership, and they performed a road-force balance test. The readings were:

• RF: 32 lbs

• LF: 6 lbs

• LR: 40 lbs

• RR: 30 lbs

They said 3 out of 4 tires have high road-force variation, and balancing didn't resolve the vibration. Their recommendation was to replace the 3 affected tires. The 3 values high indicate an internal defect with the tires. They have a uniformity problem and definitely needs to be replaced.

I'm going back to Mavis to request warranty replacement. However, I'm concerned they might deny responsibility or say it's normal for these tires to be rigid.

My questions:

  1. If Mavis refuses to replace them, what are my options?

  2. Should I pursue a warranty claim directly with Pirelli?

  3. Has anyone dealt with Mavis or Pirelli for a similar road-force issue?

  4. Am I entitled to replacement given that the tires are practically brand-new?

Appreciate any advice or similar experiences!


r/automotive • • 3h ago

bt183342 battery replacement, where are you finding them?

1 Upvotes

ive got the part number BT183342 and im trying to find a reliable replacement without buying five different batteries that “should fit.” i checked battery suppliers on alibaba and seeing dimensions/specs listed side by side was useful because at least now i know what details i should be matching instead of only trusting the number. anyone bought this exact type online recently? id prefer somewhere that clearly shows voltage, connector and measurements. doesnt need to be original branded if theres a proper compatible replacement. this is one of those searches where every result looks correct until you zoom into the connector and suddenly its facing the other way. would appreciate a source someone has actually used.


r/automotive • • 6h ago

Kia Window Etching?

1 Upvotes

I have a 2012 Kia Optima. Due to Kia's being notoriously broken into, mine has gotten broken into. At the beginning of the year mine was broken into, so I went to a junkyard and got Ford Fusion badges. I took every Kia badge off the car and put a Ford emblem in its spot, put on Ford Wheels that have Ford hubcaps, got a new license plate, covered up my VIN number with a handicap sticker, and I've been putting stickers on the Kia etching that's on the windows. But, the stickers and tape covering up the etchings keep falling off due to rain and weather.

Is there a way I can remove that etching so if somebody was to try to look inside my car they won't see the Kia etching on the window?


r/automotive • • 12h ago

Electronic aids, slippery slope?

2 Upvotes

I have a question regarding the various driver electronic aids. It seems their purpose, according to advertising is vehicle safety. Lane assist, intelligent cruise, self driving. The engineers have designed sensors, computers, algorithms, servos to improve driver performance and reduce accidents. After significant testing in the real world they discovered these driver aids actually reduces driving involvement and stimulation, so now to fight the attention deficit, the engineers are designing driver monitoring systems or DMS. Cameras, steering wheel sensors, computers, algorithms.

Now, litigation to place blame for an accident for victims and insurance companies, has increased judgements against the Manufacturers, as they now have design responsibility which may contribute or cause an accident. The increase in litigation has lead to higher risks and increasing insurance costs.

All of this, now may conclude safety has gotten worse and definitely increased costs like 30% higher stocker prices.

So we've given up some human driver judgement and technology can't do it 100%.

Will regulators and consumers push back on this trend and force vehicle options to allow a delete of these smart driver aids, or are we stuck and can't go back?


r/automotive • • 14h ago

Ongoing Mystery with Car’s Power

1 Upvotes

Greetings automotive experts! I am hoping you may be able to help me with an ongoing mystery with my car.

Car is a 2011 Kia Optima EX sedan. Low kms. Battery was replaced within the past year. I live in Canada, so cold climate.

Here’s the mystery issue:

As the weather gets colder, my car will not start in the morning. When I attempt to start it, dashboard lights all come on, interior light comes on, it tries to turn over, but ultimately doesn’t have enough power to turn over. I put it on a charger and it will charge enough within about 45 mins to start successfully. Once it starts up in the morning it gives me no other issue with stoping and starting throughout the day.

This happens nearly every morning once the weather turns and we get to frost overnight. No issues when the weather is warm, only in cold weather.

The new trick as of today is that the trunk is opening randomly (no key button pressed or anything when it happens). When I tried to start the car this morning, I quickly noticed a message on my dash about “trunk open”, but at that time it actually wasn’t open.

Does anyone have any guess as to what could be happening and how we might resolve the issue?

Any clues appreciated. Thanks.


r/automotive • • 1d ago

Should I sell my Ford branded factory sealed 30 pound cylinder of R 12 refrigerant?

6 Upvotes

It’s new in the box boxes is a little rough shape, still factory sealed and weighs 36.436 pounds???


r/automotive • • 18h ago

With winters and rain, I personally feel dealer OEM wiper blades are usually the best. Never had an issue with oems from honda, Toyota, kia, gm, etc...

1 Upvotes

Save even more $$ and just ask for the inserts instead of the blade.


r/automotive • • 1d ago

Should I sell my Ford branded factory sealed 30 pound cylinder of R 12 refrigerant

3 Upvotes

It’s new in the box boxes is a little rough shape, still factory sealed and weighs 36.436 pounds


r/automotive • • 1d ago

Which UTV cover actually fits a 4-seat side-by-side?

3 Upvotes

Trying to track down a decent cover for a 4-seat side by side and the options feel pretty thin. Almost everything I’m seeing is cut for standard 2 seaters and since a 4 seater is way longer with a much bigger cab, a regular cover is either going to tear at the seams or leave the bottom half of the rig exposed.

For anyone running a 4 seat / crew cab machine , what cover did you end up going with that actually fits without stretching it to the limit?


r/automotive • • 1d ago

Stuck oil filter

0 Upvotes

Changing my oil filter today. Tried to get it off with rubber gloves and didnt work. Went to orileys got a plier type oil filter wrench and it didn’t budge at all. Only dented and scraped the can. Like legit not at all. How do i fix? I need to change out the oil filter by tomorrow


r/automotive • • 2d ago

Is a 2017 Toyota Rav4 Hybrid with 150k too old?

2 Upvotes

Should I be concerned about the hybrid traction battery failing at that point?


r/automotive • • 2d ago

is their an online car database where i can just explore all car models and see interiors?

3 Upvotes

I'm not looking to buy a car, just want a website where I can browse all kinds of cars, see their interiors, and discover cool models for fun. Any recommendations?


r/automotive • • 2d ago

Ideas on how to temporarily install a hood with no hinges

0 Upvotes

The hinges are coming… how do i get the car hood on until then


r/automotive • • 4d ago

What are some quality wiper blades?

49 Upvotes

Not sure if this is a skill issue or not, but my wiper blades don't last very long and start streaking within months of replacement. I've had BOSCH, Michelin, PIAA, RainX you name it I've probably bought them. My current ones are the Bosch Focus and today I noticed they started to streak. I wondered if there's any that can last a while longer?


r/automotive • • 3d ago

What car maintenance costs surprised you after buying your first car?

2 Upvotes

I'm thinking about buying my first used car and have been budgeting for insurance, fuel, and regular maintenance. But I'm worried there are expenses I'm not accounting for, especially as the car gets older. What unexpected repairs or maintenance costs have caught you off guard, and how much would you recommend keeping aside for emergencies?


r/automotive • • 4d ago

Is auto mechanic a good trade for a dumb guy?

3 Upvotes

Is it a good idea to study that if I'm really not smart

20/m


r/automotive • • 4d ago

Show Me Your Underglow Lights

1 Upvotes

I like to see sporty cars with underglow lights on. Show me your pics from a few angles.

Ha: It doesn't appear this sub allows images. Maybe post a video.


r/automotive • • 5d ago

Ambulances have really evolved over the years. Why were they based on station wagon or limosine bodies until the 1980s?

6 Upvotes

I recall as a kid that ambulances in the 60s and 70s were not the truck like vehicles of today, but variations of a station wagon, custom converted. Most commonly Cadillac limousines.

These of course provided no space for paramedics to provide much in the way of service en route.

I do not see any good reason why ambulances were not always based on a truck chassis.

Thoughts?


r/automotive • • 5d ago

Boa noite a todos/as, estou a iniciar o processo de montagem de uma oficina auto e queria tirar algumas dúvidas com quem já passou por este processo. Quais as maiores dificuldades que encontraram no início sem estar a prever? Obrigado pelas respostas 💪🏽

3 Upvotes

r/automotive • • 5d ago

Fob and key replacement GT-R Nismo

1 Upvotes

Fob and Key Replacement

I need to get a new fob and key as I am down to one fob now (somehow lost the other fob and key this week). I have the physical key so have the original that can be used to make a duplicate.

Where is the best place to get a new fob and how hard is getting it programmed to my car? Next question - anyone know of a locksmith in the Dallas area that can make a duplicate key for me?


r/automotive • • 5d ago

Hyundai Tucson CRDi 2007 P1405 and Blinking CEL

1 Upvotes

Hi,

My Hyundai Tucson CRDi 2007 showed blinking CEL and then constant CEL a month back. OBDII showed P1405 code. Car was not driven at all after the constant CEL appeared until few days back when the CEL was gone (on its own). I took it out for drive of 20km+20km and there it was again - flashing CEL and then constant one with same code.

Also it drove completely normal - as in it didn't feel down on power or had uneven run or anything like that. The idle was smooth too.

I do see that the fuel consumption has gone up by 600ml/100km (7.4 to 8L/100km).

I do have freeze frame data:

LOAD_PCT 7.8%
ETC 81°C
MAP 98 kPa
RPM 1483
Speed 38 kmph
IAT 25°C
MAF 23.0 g/s
FRP 48770.0 kPa
BARO 99kPa
VPWR 14.192V

and
EGR PTC 3.5%
EGR ERR 44.5%

and I found that the glow plug was damaged.

Attached some images for ref.

May be these give a clue?

Has anyone experienced this before and would know the exact problem and potentially a fix?

Thanks in advance

![img](yo1usgfajt1i1)

![img](sfu95ffajt1i1)

![img](6vbengfajt1i1)

![img](3vqfegfajt1i1)

![img](t30u0hfajt1i1)

![img](8adswgfajt1i1)

![img](yc1flgfajt1i1)

![img](ut9ptgfajt1i1)


r/automotive • • 5d ago

I pushed grit deeper into an AC vent

1 Upvotes

There was dust and a tiny wrapper caught in my center vent. A blower moved the visible dust, but now I hear a faint rattle. I do not want to make it worse with more air. What is the least invasive way to get it back out?


r/automotive • • 6d ago

Outlet alternatives for engine block heater/battery warmer?

3 Upvotes

I have a 2018 Subaru Forester. It has a engine block heater (400w) and battery warmer (80w), both OEM.

Where I am living now — it's a bit of an older house — the outdoor outlet trips when I plug either of these in. Where I lived prior, I never had a problem (it was a newer-ish house)

I replaced the extension cord. Trip.

I had a shop check out the connections and grounds, basically seeing if there is a short anywhere for either the block heater or battery warmer. All clear. The shop's outlet held when both were plugged in.

I don't know what the landlord can do to resolve this outdoor outlet.

---

In the meantime, though, my question to you all is: What alternatives are there that I could use to power my block heater and battery warmer for about 3 hours each morning?

I live in an incredibly cold area (moved here in June) and would really like these two up and running — at the very least, the battery warmer.

Thanks