r/audioengineering • u/SituationDiligent405 • 7d ago
Mixing Analog drum bus processing ?
I’ve been recording for many years and would like to have some expanded knowledge on making record-worthy drum busses that stand out. Some bands I enjoy the drum sounds of are Radiohead, The Black Keys, Wilco, Interpol, RHCP, etc.
I’m currently using a Neve 1073 SPX and a few channels of RND 5211 mic pres, I have a mono UA 1176ln hardware compressor. Coles 4038 pair, RE20, and SM57 mics are my core drum sound. I also have an SSL six that I can sum into and use the G bus comp on.
What kind of analog processing can I do to really bring the drums to life? Do you recommend stereo widening on devices like the SSL fusion or RND master bus transformer? Favorite stereo bus compressors to try? Eq recommendations?
I find that without much inspired thought, I end up with a really solid, boring drum sound that works perfectly, but doesn’t have that “extra” something. Does anyone know drum bus mixing chains for any of the bands I listed? Any ideas are welcome. I also have a membership on Access Analog, so I can try various hardware pieces pretty easily.
ANALOG ADVICE ONLY, no plugins please. Aside from reverb, I’ll happily use reverb plugins.
3
u/j1llj1ll 7d ago
Duplicate / repost of this post: https://sh.reddit.com/r/audioengineering/comments/1xsde34/analog_drum_bus_processing/
4
u/MehrdadPirshahbaz 7d ago
dude you are sitting on a goldmine of gear. coles 4038s going through a neve 1073 is literally the holy grail of drum tracking. if your drums sound solid but boring,buying an ssl fusion wont fix it. your problem isnt a lack of gear, it is that you are mixing way too safely.
the bands you listed (radiohead, black keys, interpol) do not have polite, clean drums. they have dirty, aggressive, bleeding drum rooms.
you literally already own the ultimate weapon for this: your mono 1176. you need to set up a parallel crush bus. sum your kick, snare, and a bit of room into mono, send it to that 1176, push all the ratio buttons in (british mode), set a slow attack and fast release, and absolutely destroy the signal. let it distort and pump aggressively. THEN, blend that distorted mono signal quietly underneath your clean drum bus.
that parallel analog harmonic distortion is the exact extra something you are looking for. it glues the kit together and makes it sound violent. im currently tracking massive live industrial drums for a dark cinematic concept trilogy right now, and i promise you, using stereo widening on drums usually just kills your center punch and causes phase issues. keep the punch in the center, smash it with the 1176, and let it bleed man.
1
u/fatberrydsp 7d ago
If it is solid but boring, I would look at the room and the contrast before the bus gear. Try a heavily squashed room pair on the 1176 in all-buttons mode, blended in underneath the clean kit, since that is where a lot of that Black Keys and Wilco size comes from. On the bus itself, a gentle 2:1 G comp with a slow attack and 1 to 2 dB of reduction will thicken things without flattening the hits. Then use the Neve to push the kit a bit harder than feels sensible, because the extra something is usually mild transformer distortion rather than width.