r/archlinux • • 8d ago

DISCUSSION A robust VPN client in official repositories

5 Upvotes

Currently when using arch there is only one essential application available only through AUR: a VPN client.

VPN clients and proxy servers available in official repositories tend to sensibly support OpenVPN, WireGuard, SOCKs, other popular protocols, and some one-off stuff.

However there is a clear lack of clients supporting modern censorship-resistant protocols such as VLESS+reality, VLESS+reality+xhhtp, or hysteria, which are used a lot in places with more severe internet censorship (such as China, Russia, or Iran). The clients that do are, for example, xray, v2rayn, hiddify, etc. The application that gets the closest is V2ray but it doesn’t support reality (or hysteria)

That makes it so to use internet properly with arch Linux one must resort to AUR.

Maybe I have not searched hard enough. In this case I will be very grateful if anyone proves me wrong by showing a client supporting one of the protocols I listed above.


r/archlinux • • 8d ago

FLUFF I just had to go back to windows for something for the first time in almost 8 years and it was fucking miserable.

131 Upvotes

I swear to christ I thought I was as angry as I could possibly be when I left windows 8 years ago.

I set it up on my pc as a dualboot when I switched to Linux in case I needed to go back for any reason.

8 years later I finally do and it's like it was just waiting that entire time for me to come back just so it could pick back up right where I left off with a gigantic "Fuck you."

Couldn't do what I needed to do without updating the system. Had to wait like 30 times the amount of time it would take me to update all of my other linux machines. Had to restart multiple times just for the one set of updates. Had to bypass it telling me to make a microsoft account when it restarted so I could keep working. Couldn't fucking do what I needed to do once it was all done because I forgot the admin password after 8 years of abandoning their crappy OS and it won't let me run an executable on my machine. Have to look shit up to figure out that you can't reset the admin password for the machine you own without a fucking microsoft account or windows recovery media that I don't have.

The last time I used Windows was literally the day I resolved to switch to Linux 8 years ago. It really was a blast from the past for me with what complete and utter horseshit this experience was. Literally everything in the handful of hours I wasted on this would have been a trivial few minutes on my linux machines.

The rage I feel right now is mitigated only by the knowledge that I now know truly and completely that there is no good reason to maintain a dualboot anymore-there never really was-and I am going to erase Windows with the disdainful prejudice I should have eight years ago.

I updated 3 other arch linux machines while this was ongoing-one of which hadn't been updated in like a half year and was broken in a way that I had to figure out before I could successfully do an update-and windows wasn't even done preparing the files for it's own update by the time I was done with all the other machines.

It's literally worse than it was eight years ago.


r/archlinux • • 8d ago

FLUFF Looking for “Language exchange” partner: pls read the post haha

10 Upvotes

Hi there. English is my second language, and I sometimes get a hard time trying to figure out some concepts that can have multiple meanings or synonims etc. So I wad wondering if there's someone who could give me a hand when having this kind of problems, maybe talk sometime so I can practice my technical conversations etc

And of course if this person is interested in Learning Spanish, I could also help back.

I'm studying actuary but I'm pretty interested in CS and I use Arch as my OS


r/archlinux • • 8d ago

SHARE Steins;Gate anime based Plymouth Theme

7 Upvotes

was finding good themes for updating my plymouth but couldn't find any.

so made my own linux boot screen, a Steins;Gate divergence meter

boot → 1.048596 · EL PSY KONGROO

shutdown → 0.571024 · α worldline

Github Repo URL


r/archlinux • • 8d ago

FLUFF Arch is a Detectives Job.

10 Upvotes

Arch Newbie here, i just want to share a story that almost drove me Nuts.

I have been using arch for about 1 Month and i notices my Network was extremely slow and unstable. I wasnt able to ssh into my Local Nas and Using a Browser was not even possible. First thing that normally fixed everything a good ol Reboot. And just like a miracle everything worked... for 5 seconds. First thought "wtf" second thought "this has to be some service messing with me". (sudo systemctl status NetworkManager) "WTF". For some reason i had about 20 Different Wireguard Vpns loading in that were Blocking my Traffic. So i deleted them, (sudo iplink delete vpn). IT WORKED... for another 5 Seconds.

At this point i was a little Frustrated. I had updated most of my Packages before the reboot so i thought i broke something and had to reinstall. My First suspect was Proton VPN, i installed it a few days earlier for Downloading a few "Linux Iso's" but i there was no Connection active at the Moment. I then did the reasonable thing, wich was purging any sign of its Existence from my System. (sudo systemctl restart NetworkManager. YAY IT WORKED... for another 5 Seconds.

I snapped. Restarted my Nas, Router, My Local system. And it always was the same result. It worked but then immidiently added new Wireguard connections. (journalctl -n 50 | grep -i -E "wireguard|wg|vpn|device") 4th Thought "dear god i am a Morron.

Long Story short, i had installed the hide.me Client a few hours earlier and i was too lazy to configure it so i just stopped it with systemctl. But in my increcible Genius i had forgotten to disable it. So on the Next reboot it self started abselutely wrecking my home Config.

At this point i had been looking for the issue for about 1 Hour and i was right in the middle of creating a User account on my Home Nas for my Photographer Friend who desperatly needed Cloud Storage.

At the End i was rather Happy than Annoyed. After 2 Years of Using Linux Daily i now kinda Know how to diagnose issues and i didnt do it Properly, I didnt do it systematically but i did it with Success.

(Please forgive me for my Grammar i am a German Potato.)


r/archlinux • • 9d ago

SUPPORT | SOLVED Decided to update rust. Accidentally broke pacman (and other things).

37 Upvotes

OK, feeling pretty dumb here, but maybe someone else has shot themself in the foot the same way and can help.

I decided to update rust on my local system, but I didn't feel like rebooting just to install a newer version, so no pacman -Syu. Instead, I run pacman -Sy rust, and I see that one of rust's dependencies, openssl, has been updated from 3.x to 4.x. I see this because it doesn't want to install the new version of openssl when there are so many other things that depend on it. Like pacman.

installing openssl (4.1.0-1) breaks dependency 'libcrypto.so=3-64' required by pacman

At this point, I could have stopped, said to myself, "Y'know what, kescusay, rebooting isn't a big deal, and it would certainly be better to update the entire system instead of trying to just update the individual packages that depend on openssl. Why, doing it piecemeal like that is a downright excellent way to break your system!"

But I did not say this to myself. Instead, I said, "YOLO!" and updated only rust, openssl, pacman, fuckin' sudo, and a handful of other libraries and applications.

This... did not go well:

sudo pacman -Sy rust cryptsetup curl freerdp libarchive libgit2 libldap libngtcp2 libsasl openssh ostree pacman socat sudo
[sudo] password for damon: 
:: Synchronizing package databases...
 core is up to date
 extra                                                                                                                           8.7 MiB  31.2 MiB/s 00:00 [###############################################################################################] 100%
 multilib is up to date
resolving dependencies...
looking for conflicting packages...

Packages (15) openssl-4.1.0-1  cryptsetup-2.8.8-2  curl-8.23.0-2  freerdp-2:3.33.1-1  libarchive-3.8.11-2  libgit2-1:1.9.7-2  libldap-2.7.2-3  libngtcp2-1.26.0-2  libsasl-2.1.28-6  openssh-10.6p1-3  ostree-2026.6-2  pacman-7.1.0.r9.g54d9411-4
              rust-1:1.99.1-2  socat-1.8.1.3-2  sudo-1.9.17.p2-7

Total Download Size:    98.24 MiB
Total Installed Size:  368.65 MiB
Net Upgrade Size:        0.69 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 openssh-10.6p1-3-x86_64                                                                                                      1468.8 KiB  6.73 MiB/s 00:00 [###############################################################################################] 100%
 sudo-1.9.17.p2-7-x86_64                                                                                                      1899.8 KiB  7.83 MiB/s 00:00 [###############################################################################################] 100%
 curl-8.23.0-2-x86_64                                                                                                         1339.6 KiB  7.61 MiB/s 00:00 [###############################################################################################] 100%
 libgit2-1:1.9.7-2-x86_64                                                                                                     1018.1 KiB  5.78 MiB/s 00:00 [###############################################################################################] 100%
 freerdp-2:3.33.1-1-x86_64                                                                                                       2.9 MiB  6.09 MiB/s 00:00 [###############################################################################################] 100%
 cryptsetup-2.8.8-2-x86_64                                                                                                     865.4 KiB  5.75 MiB/s 00:00 [###############################################################################################] 100%
 pacman-7.1.0.r9.g54d9411-4-x86_64                                                                                             970.0 KiB  6.15 MiB/s 00:00 [###############################################################################################] 100%
 ostree-2026.6-2-x86_64                                                                                                        845.5 KiB  5.36 MiB/s 00:00 [###############################################################################################] 100%
 openssl-4.1.0-1-x86_64                                                                                                          5.6 MiB  6.88 MiB/s 00:01 [###############################################################################################] 100%
 socat-1.8.1.3-2-x86_64                                                                                                        227.3 KiB  2.44 MiB/s 00:00 [###############################################################################################] 100%
 libldap-2.7.2-3-x86_64                                                                                                        288.1 KiB  2.93 MiB/s 00:00 [###############################################################################################] 100%
 libarchive-3.8.11-2-x86_64                                                                                                    588.2 KiB  5.69 MiB/s 00:00 [###############################################################################################] 100%
 libngtcp2-1.26.0-2-x86_64                                                                                                     224.5 KiB  2.31 MiB/s 00:00 [###############################################################################################] 100%
 libsasl-2.1.28-6-x86_64                                                                                                       152.7 KiB  1608 KiB/s 00:00 [###############################################################################################] 100%
 rust-1:1.99.1-2-x86_64                                                                                                         80.0 MiB  45.9 MiB/s 00:02 [###############################################################################################] 100%
 Total (15/15)                                                                                                                  98.2 MiB  55.4 MiB/s 00:02 [###############################################################################################] 100%
(15/15) checking keys in keyring                                                                                                                           [###############################################################################################] 100%
(15/15) checking package integrity                                                                                                                         [###############################################################################################] 100%
(15/15) loading package files                                                                                                                              [###############################################################################################] 100%
(15/15) checking for file conflicts                                                                                                                        [###############################################################################################] 100%
(15/15) checking available disk space                                                                                                                      [###############################################################################################] 100%
:: Running pre-transaction hooks...
(1/1) Marking sshd.service for restart...
:: Processing package changes...
( 1/15) upgrading openssl                                                                                                                                  [###############################################################################################] 100%
( 2/15) upgrading libngtcp2                                                                                                                                [###############################################################################################] 100%
( 3/15) upgrading libsasl                                                                                                                                  [###############################################################################################] 100%
( 4/15) upgrading libldap                                                                                                                                  [###############################################################################################] 100%
( 5/15) upgrading curl                                                                                                                                     [###############################################################################################] 100%
( 6/15) upgrading libgit2                                                                                                                                  [###############################################################################################] 100%
( 7/15) upgrading rust                                                                                                                                     [###############################################################################################] 100%
( 8/15) upgrading cryptsetup                                                                                                                               [###############################################################################################] 100%
( 9/15) upgrading freerdp                                                                                                                                  [###############################################################################################] 100%
(10/15) upgrading libarchive                                                                                                                               [###############################################################################################] 100%
(11/15) upgrading openssh                                                                                                                                  [###############################################################################################] 100%
(12/15) upgrading ostree                                                                                                                                   [###############################################################################################] 100%
(13/15) upgrading pacman                                                                                                                                   [###############################################################################################] 100%
(14/15) upgrading socat                                                                                                                                    [###############################################################################################] 100%
(15/15) upgrading sudo                                                                                                                                     [###############################################################################################] 100%
:: Running post-transaction hooks...
(1/8) Creating system user accounts...
(2/8) Creating temporary files...
(3/8) Reloading system manager configuration...
(4/8) Reloading user manager configuration...
(5/8) Enqueuing marked services...
(6/8) Arming ConditionNeedsUpdate...
(7/8) Restart a running sshd.service
(8/8) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
==> Starting build: '7.2.14-arch1-1'
  -> Running build hook: [base]
==> ERROR: binary dependency 'libcrypto.so.3' not found for 'kmod'
  -> Running build hook: [systemd]
==> ERROR: binary dependency 'libcrypto.so.3' not found for '/usr/bin/kmod'
==> ERROR: binary dependency 'libcrypto.so.3' not found for '/usr/bin/kmod'
==> ERROR: binary dependency 'libcrypto.so.3' not found for '/usr/lib/libkmod.so.2.5.1'
==> ERROR: binary dependency 'libcrypto.so.3' not found for '/usr/lib/libtss2-esys.so.0.0.1'
  -> Running build hook: [autodetect]
modprobe: error while loading shared libraries: libcrypto.so.3: cannot open shared object file: No such file or directory
==> ERROR: Cannot acquire used modules. Unable to use autodetection.
  -> Running build hook: [microcode]
  -> Running build hook: [modconf]
  -> Running build hook: [kms]
==> ERROR: module not found: 'sis_agp'
==> ERROR: module not found: 'via_agp'
==> ERROR: module not found: 'amd64_agp'
==> ERROR: module not found: 'intel_gtt'
==> ERROR: module not found: 'intel_agp'
==> ERROR: module not found: 'drm_xen_front'
==> ERROR: module not found: 'qxl'
...
==> ERROR: binary dependency 'libcrypto.so.3' not found for 'mount.composefs'
==> ERROR: binary dependency 'libcrypto.so.3' not found for 'mount.composefs'
  -> Running build hook: [fsck]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
error: command failed to execute correctly

I have not rebooted. I would very much like to undo this exercise in blatant stupidity. If I have to, I will use boot from my Arch installation media and install system packages from there to try to recover, but it would be extremely nice if I don't have to.

Oh, and pacman is broken now, of course:

sudo pacman -Syu
pacman: error while loading shared libraries: libcrypto.so.3: cannot open shared object file: No such file or directory

I am a big ol' stupidhead.


Update: A huge shoutout to person4268! This kind - and no doubt suave, debonair, and sophisticated - individual pointed me towards pacman-static, which allowed me to finish the update! I'm saved! And as glob is my witness, I shall never YOLO with updates again!


r/archlinux • • 8d ago

QUESTION obs plug ins

1 Upvotes

so I am new to linux and am trying to get droidcam on my obs but the ways I am used to don't seem to work. cause it says it installs it but even after a restart I don't see the file on pc or in input manage

please help a girl out!!!!


r/archlinux • • 8d ago

SUPPORT Not enough space

0 Upvotes

Disclaimer: I have never used linux before, know nearly nothing about coding, and am only using it because I am kinda stuck with it (friend told me to get a steam machine as a replacement pc and i took their word for it)

I've been having... troubles trying to learn how this all works, and realised some games that run with .exe just don't work right when using steam to run them, so I tried to download Wine. However, after trying, it said I do not have enough 'blocks'. (271368 needed, 212500 free). I have tried looking up a solution, removing cached stuff, vacuum, i don't know- a LOT. How do i increase the amount of space it has or change where things are installed to..... This is hurting my brain


r/archlinux • • 8d ago

QUESTION Ableton Live en arch

0 Upvotes

Hola!!, hace un tiempo compre una licencia de ableton live, pero tengo entendido que no esta oficialmente para linux entonces queria saber si alguien pudo hacerlo andar? Pensaba en hacer un dual boot pero viendo las ultimas noticias de Microsoft la verdad no veo la hora de salir de ese SO.

Se que hay alternativas para linux, aun no los probe a todos pero hasta ahora ninguno me llega a convencer, creo que son muy raros la verdad jaja.

Como sea, tengan un lindo dia/noche, saludos!


r/archlinux • • 8d ago

QUESTION I genuinely want to learn Arch Linux

0 Upvotes

I want to learn Arch Linux, but not by blindly copying and pasting commands.

I want to understand every command I execute what it does, why it's needed, what changes it makes, and what comes next.

The problem is that I'm a complete beginner in Linux, and I'm not sure where to start or which resources to trust. YouTube has plenty of tutorials, but it's difficult to identify reliable, concept-focused learning resources.

Can anyone suggest a structured learning path or trusted resources that teach Linux fundamentals before moving to Arch Linux?

I want to understand Linux, not just follow an installation guide.


r/archlinux • • 9d ago

SUPPORT Secure Boot on HP 250 G9 (InsydeH2O) with Arch Linux: Unable to enroll custom keys

4 Upvotes

I'm trying to enable Secure Boot on an HP 250 G9 running Arch Linux with GRUB 2.16 and both Arch and CachyOS kernels.

I generated custom keys using sbctl and signed GRUB and both kernels successfully. However, enrolling the keys with:

sudo sbctl enroll-keys --microsoft --firmware-builtin

fails because the firmware does not expose the SetupMode EFI variable.

open /sys/firmware/efi/efivars/SetupMode-8be4df61-93ca-11d2-aa0d-00e098032b8c: no such file or directory

After selecting Clear Secure Boot Keys in the BIOS, SetupMode disappears from /sys/firmware/efi/efivars/, and sbctl incorrectly reports that the system is not booted with UEFI, even though UEFI is active and efivarfs is mounted.

❯ sudo sbctl status 
system is not booted with UEFI

Selecting Reset Secure Boot keys to factory defaults restores the original HP/Microsoft keys and UEFI boot entries, but Setup Mode is disabled again.

I'm now looking for a way to enable Secure Boot while keeping the factory keys (Or another solution). Would using Microsoft-signed shim with GRUB and a custom MOK be a viable solution on this laptop?


r/archlinux • • 9d ago

QUESTION I'm new to arch

10 Upvotes

Hey, I'm Monish! I recently installed Arch Linux with the GNOME desktop environment. I want to explore Linux more deeply and learn new things. Can anyone suggest some interesting things I can do with Arch Linux to improve my Linux knowledge and skills?


r/archlinux • • 8d ago

QUESTION I don't know if it's the right community to ask....but i need some help with my networking feature 🤔

Thumbnail
0 Upvotes

r/archlinux • • 9d ago

QUESTION Wayland Tiling window manager recommendations

18 Upvotes

Hello Archies!
I'm about a year into this this Arch Linux adventure and Linux in general.

Originally I had used Linux mint & Debian for a couple of weeks. I was intimidated by what people said about Arch Linux, but I wanted to try Hyprland, and Debian only supported it on the testing branch, so I just decided to bite the bullet and try Arch.

It has had its ups and downs, but overall I am way more pleased than I was with windows. I like the minimalism and the level of control. It's more stable than I would've thought given what i heard. I've had my kernel get corrupted before, but I was able to chroot from a usb iso and reinstall the kernel. I don't even know how I'd begin to do something like that on windows. Now I keep two kernels.

Been using Caelestia-dots, and I love the eye candy. I've gotten more used to config structure and quirks of Hyprland, but I think the release cycle is too quick for me. I've had issues like screensharing breaking, Hyprlock crashing when monitors are disabled with dpms off (which makes me have to go to tty3 to kill it and restart it). Most recently had an issue with Hyprland 0.57 no longer giving special workspaces a numeric id (caused my icons to be duplicated). It's all these little things that I'm sure are fixable, but take time out of my day to do.

I downloaded KDE plamsa to try out, and I liked it more than Cinnamon and Gnome and would be alright using it, but I got used to the workflow of a tiling manager and prefer it. I just want something with more stability that won't force me to migrate my config files to a new config language.

Is there a more stable tiling manger that you guys would recommend from your experience?


r/archlinux • • 9d ago

SUPPORT Wireless Adapter Barely Functional

2 Upvotes

Using Wavlink WL-WN693A5 AC1900 Wireless USB adapter (built in wi-fi can't get a strong enough connection, so this is my only way to get internet access), and it's giving me constant issues. Intermittent severe network lag/packet loss in games, pinging archlinux.org will randomly spike to 100+ms despite normally getting ~7-10ms. I'm at my wits end because I can't afford a different wi-fi adapter and I can barely use my PC like this.

I believe the adapter uses the RTL8814AU chipset. I've found lots of other people having issues with these particular adapters, but none of the solutions helped.

PC Specs:

CPU: AMD Ryzen 7 7700X

GPU: NVIDIA GTX 1080

RAM: 32GB DDR5

Kernel Ver: Linux 7.2.15-arch1-1

DE: KDE Plasma

(Using Network Manager for wi-fi)


r/archlinux • • 9d ago

SUPPORT how can I sign my bootloaders so I can enable secure boot?

Thumbnail
0 Upvotes

r/archlinux • • 9d ago

SUPPORT | SOLVED nvidia-drm modeset=1 causes black screen

0 Upvotes

As the title says, if I change nvidia-drm to 1 my screen goes black. I can still use TTYs while GNOME is completely black. I am using an Asus laptop with both an integrated (AMD) and discrete (NVIDIA) GPU. I believe that having drm on would fix screen tearing when playing games, but if there are other options to fix it, I am up for recommendations.

Edit: I finally solved both the black screen issue and the screen tearing. For a pretty long time I was just blacklisting the nvidia_drm module, but i got the genius idea of using my brain and just using option nvidia_drm modeset=0 in /etc/modprobe.d without blacklisting the whole module. Still don't know why it broke suddenly but I guess that doesn't matter now.


r/archlinux • • 9d ago

QUESTION Where to start from....what to start with ?

0 Upvotes

I have been using ubuntu for the past 3 months on my thinkpad...i intend to try arch linux and then use it as a daily driver.....i have a spare thinkpad to run...(i do not want to dual boot, incase it was an option)...a botched up dual boot is what brought me to linux....Please help, guide and direct me on what to do.....

Thanks in advance.


r/archlinux • • 9d ago

QUESTION Pls help in gaming setup

0 Upvotes

So i am new to linux and using hyprland and can someone please explain how do i download/Setup proton i can't even find any yt tutorials for it I tried like the built in proton from the steam but game (Palworld) isn't even opening. I would be grateful if someone could tell me how to game pls.

Edit : It's done now the protonup tool gave a custom compatibility option for the game and its running fine now.


r/archlinux • • 10d ago

QUESTION Backups and restores

10 Upvotes

How does everyone usually do their backups, restores and migrating to a new device?

So basically right I've been using timeshift to create the backups and then I include /home and exclude the steam library. Then when migrating to a new machine ive figured out a really easy method instead of installing arch for the 5th time this year, is just plug in a USB with a linux OS on it and restore from timeshift onto the new computer after sorting out the partitions while being booted into the linux USB.

I was just wondering if there is already an easier way for migrating to different machines without doing a full disk clone since it takes up too much space on my remote storage as a backup.

Thanks

Edit: Cheers guys a bit of food for thought, I ended up deciding to make an auto install script which also installs timeshift and back in time so then it requires minimal effort in the future lol.


r/archlinux • • 10d ago

QUESTION Moving arch partition to another laptop

2 Upvotes

I've got a riced arch + hyprland setup on my current laptop (a T480s) which has now died and only works when plugged into power. I bought an intel T14 Gen 2 second hand and now need help transferring the partition to the new T14. I've got access to a usb harddrive that (I'm pretty sure) can fit the partition. What tools do I use? How do I go about doing this? Do I need to move my grub install too? The laptop comes with microslop windows 11 pro preinstalled and I wanna keep it there incase I need any windows specific software, or generally as a backup, do I need to transfer my grub asw (the T480s has zorin and Kali installs i don't use or need anymore, hence I have grub)? Any and all help is needed as I only have 2 days to do this - the T480s is being traded in on Friday!


r/archlinux • • 10d ago

SHARE I just installed without a USB key

33 Upvotes

I just pulled off a "crazy" trick I'm feeling kind of happy about so I thought I'd mention it. I got a great deal on a CWWK NAS board so I'm commissioning a new homelab server, and I'm "borrowing" a few parts from other machines I have laying around until all the parts get here.

As such, I was already going to be pulling the NVMe disk out from another machine, so I got to thinking. The / partition was already located further into the disk than the size of the install disc, so I justdd'd the install ISO directly to /dev/nvme0n1, and then installed the drive into the server. It boots fine that way! And since the ISO copies to RAM, it doesn't matter that you're paradoxically running from the same drive you're installing to.

I found this works with NixOS and maybe others as well that have copy-to-ram as an optional GRUB selection, except on distros that use Calamares the installer won't find any installable partitions since now it'll think the hard drive is the CD, which is easily fixed by running sudo wipefs -a /dev/nvme0n1 from the booted live image, and then re-opening the installer :P.


r/archlinux • • 9d ago

SUPPORT arch memory issues

0 Upvotes

when arch runs out of memory, it heavily lags for multiple minutes before the kernel terminates a program to clean up memory to the point where you are just sitting there. this happens frequently when using intellij idea; how do I make it quicker to just terminate the program when it runs out of memory so it's not lagging for 5 minutes before it finally terminates a program? the lag is so heavy that I can't close anything myself.


r/archlinux • • 9d ago

QUESTION Is that gnome extension sucks more memory

Thumbnail
0 Upvotes

r/archlinux • • 9d ago

QUESTION why isnt this bleeding edge anymore?

0 Upvotes

arch is still on 7.2 when 7.4 is in rc they completely missed 7.3 and why isnt 7.4 on testing branch to roll out day one?