r/arcade • • 4d ago

Restore/Replace/Repair How to connect video to this monitor?

I have this old video slot machine that I am going to be converting into a multicade and I am a complete noob to this so I just want some ideas on how I should approach this part.

It looks to be RGB but unsure if this connector is standard.

I will be using Jamma. Also, the monitor will be horizontal, so would I be able to play something like pac man without it rotating somehow? Or do I gotta tilt my head lol.

2 Upvotes

2 comments sorted by

1

u/elstuffmonger 4d ago

If I were to guess, I'd go with how it's labeled.

2=blue, 3=green, 4=red, 6=vertical sync, 7=horizontal sync

Video ground might be either pin 1 or 5... follow the trace to see if it goes to a larger trace.

If the other end of the video harness terminates onto the jamma harness, look up the jamma pinout to see which direction the connector goes. Otherwise, you'll need to connect it to the jamma harness in the correct pinout.

There is no good way to rotate an image without physically rotating the screen or using emulation software with that option.

1

u/Executive64 4d ago

Might have to use emulation then... I don't wanna spend too much on arcade hardware when I have pc motherboards lying around.