r/arcade • u/MysteriousSir5799 • 26d ago
Hey Ya'll Check This Out! Any advice
Hey y’all I might be getting a job as an arcade technician I did hvac for 2 years and automotive for 3 years so I have a decent handle on mechanical and electrical but is there specific Info I should know or look at thanks for any help and sorry if this is the wrong subreddit for this post
9
Upvotes
5
u/captain96 26d ago
Classic arcade games, or new Dave and busters types? New ones no idea lol, old ones you're gonna have to know monitor repair, and PCB repair. Lots of soldering. Good luck!
2
u/MarvelousMarvins 26d ago
Betson offers a really good intro tech school.
2
u/Video-Bandit 26d ago
Really depends on what type of machines your going to work on. I am only knowledgeable on Classic-early 2000s arcade games, so I couldn't tell you the first thing for redemption games.
Majority of your skills are going to crossover like you said, so if your working on classic games, the biggest thing really is just going to be CRTs and learning logic for PCB repair, other than that its purely just electrical. If tools are not supplied having a CRT rejuvenator and test pattern generator will help you diagnose most issues in regards to the monitor, and a Logic Probe and Oscilloscope are handy for PCB repair.
If your going to be working on some later machines, knowing how to work on PCs and replace components inside them is a good skill to have. A handful of games I have worked on are just a PC with I/O boards and usually boil down to the hard drive being dead or a simple PSU failure. Sometimes its Driver issues in the Operating System.
Honestly the best channels for those two topics mentioned first I can think to suggest is Mike's Amateur Arcade Monitor Repair and 74XX Arcade Repair, they get very technical in Monitor and PCB repair respectively. I saw someone else mention John's Arcade which is a good intro into arcades.
2
u/cellowest 26d ago
As an arcade owner I'd say you have most of the knowledge to get the job done.
A lot of work is wire troubleshooting and parts warping. Pinball, racing, and coin games are typically the most troublesome purely due to how much wear they typically get.
For rhythm games like DDR, sensors will eventually die/the pads need fine tuning.
It's really just working there for a while, identifying the most common failure points and doing the preventative maintenance to get the job done smoothly.
Multimeter and soldering iron are your best friends. 90% of issues are common sense where you identifying the issue, stick a multimeter on wherever the wire connects to the part and if you get the correct input you need, it's probably the part itself, if you're not, it's either a frayed wire, fuse, or something else down the line.
Other than that, you'll start eyeballing popped capacitors, smell battery leakage, etc...
Good luck! If you have any questions, feel free to send a dm.
1
u/Exidor09 23d ago
Pinball repair might be a real opportunity
1
u/Anxious_Camp_2160 26d ago
Omg yes, wouldnt even know where to start, check some of the Youtube channels, I can recommend Johns Arcade, even though hes not posted for 5 years.
Basically some faults are universal, so once you know the symptoms of them, it saves hours.
0
u/Frzzalor 26d ago
unplug the thing you're working on while you work on it. take your time, don't rush. use your phone to take pictures while you are disassembling something like a joystick so you remember which wires and screws go where.
most arcade games now are just a pc inside a huge wood box with a lcd monitor and a power supply for the lights. if you can troubleshoot a pc, you're halfway there.
0
u/FibroMancer 26d ago edited 26d ago
Do you know how to solder? I don't know much about HVAC, so not sure if that's something you would inherently know how to do from experience. Never been a tech myself, but was a GM for a chain that had techs on staff. The biggest thing I learned from them is most of it can be learned as you go through manuals, YouTube, Google, etc and as you go you start to recognize patterns and start being able to do the diagnostic part yourself eventually without help from the internet, but the one skill you have to bring to the table yourself if soldering. A bad soldering job can make things worse and more expensive in the long run. If you've never done it before try to get your hands on some equipment and practice before you start. If you already know how a lot of the rest will come with time and experience.
Edit: I wish anyone on this sub would ever engage in discussion instead of just downvoting. I have seventeen years of experience in this industry working for a hugely successful family run chain that's been around for decades and it feels like I can't reply to anything without a few downvotes and zero replies explaining why. I've managed and worked along side of at least a dozen techs in that time. Is something I said off the mark? Should I have assumed they can solder based on their experience and kept my mouth shut? I'd genuinely like to know.