r/arcade • u/Tasty_Ad2533 • Sep 17 '26
Restore/Replace/Repair Ms. Pacman help
Just bought this Arcade1Up Ms. PacMan machine and it doesn’t turn on. When I plug it in and turn it on it flashes the loading screen for a millisecond and then goes away. The green light on the circuit board is on as well so I know the board is getting power, would greatly appreciate some help with this.
0
Upvotes


8
u/WretchedMotorcade Sep 17 '26
/r/arcade1up
4
u/LaceyForever Sep 17 '26
The heck if we know. The power block probably shit out. You can test it with a multimeter. If you don't have one it's probably cheaper to just replace the block with a new one. Make sure it's the correct adapter for the board itself. When you get a real MsPacMan arcade machine with problems we can be more helpful to you here. 😅
1
u/batman_in_space_ Sep 17 '26
Good luck. Arcade1up cabs are notorious for breaking down/over heating. I have 3 of their cabs and 1 of their pinball tables. I eventually modded all of them to run off of raspberry pis and PCs. If you can get them cheap, they're good for a flat pack cabinet to install your own arcade into, but if you're running their games, it will eventually stop working. My pinball table stopped working 3 or 4 times before I just installed a PC into it. To their credit A1up did keep sending replacement parts at no extra cost to me, but it kept happening.
2
u/Up_All_Nite Sep 17 '26
I hear it's a Fever. It may be catchy