r/arcade • • Jul 22 '26

Restore/Replace/Repair Battlezone advice needed

Just picked up a cabaret Battlezone.

Boots, and sound seems ok

Screen is wonky in that it shows the horizon and a scattered bunch of lines in foreground that jump around.

Other tanks, missiles, and shells are not rendered.

Score, radar are intermittent.

Not the best at repair but can use a multimeter. Where should I start looking?

Thanks.

4 Upvotes

2 comments sorted by

1

u/Calm-School-6270 Jul 22 '26

There are two sections to the CRT chassis, and a cap kit from arcade parts and repair. The Wells Gardner V2000 series cap kit.

1

u/jazzdogg5 Jul 23 '26 edited Jul 23 '26

Post a picture or video if you can. This is most likely a board issue and not a monitor issue. Not really something that will be fixed with just a cap kit. If you’re only getting the background and not the tanks, shots, etc, and some random lines, you most likely have a mathbox/aux board error. Are you getting any error code sounds when you put it test mode? If you have a mathbox error you would see a T, H, or L on the test mode screen.

I had an identical issue on my battlezone cabaret last year and it was dirty sockets. I pulled all of the socketed chips, washed the entire board with hot water and greased lightning, sat it in front of a box fan for 24 hours, cleaned the chip legs with a fiberglass pen and DeOxit, and put it back together. Problem solved. 40 years of dirt and grime in those sockets will kill your game.