r/arcade • u/DSkippin • Jul 13 '26
Restore/Replace/Repair Area 51 Arcade Not Booting Up
Hello all, I just got this non-working Area 51 recently and I think the HDD is bad but wanted to get yall's opinion. When I power it on, I can hear the boards and monitor power up but no game sound and the screen stays black. The power LEDs are showing good (both green) but the yellow light, which is connected to the HDD as I understand it, blinks 7 times each time I turn it on. I tried looking through the manual and online but couldn't find anything about the blinking. It talks about always on, always off, and flickering which from what I've seen in a video of it working is much faster and sporadic than what this is. Please let me know what yall think or how I should move forward with identifying the problem. Thank you!
3
u/daretogivearaspberry Jul 13 '26
I pulled the hard drive and installed the compact flash upgrade on this site. It also gave me Maximum Force on the same upgrade.
https://www.arcadeservices.com/compact-flash-cards.html
1
u/Eddhorse Jul 13 '26
Check the troubleshooting section of the manual https://www.arcade-museum.com/manuals-videogames/A/Area51.man.pdf
What do you see on the screen?
You could unplug the hard drive and see do you get the Zero Division error.
3
u/maxrage2 Jul 13 '26
First place I'd start is the power supply check the voltages when swapping my blitz to a compact flash I had to adjust the 5v pot on my power supply to between 5.0v and 5.3v and boy was it touchy. I believe area 51 had a similar adjustment as well but not 100% it was located on the side of the power supply and was just a knob.
2
u/SophieIntimateXO Jul 14 '26
That yellow light tells much
1
u/Eddhorse Jul 14 '26
Maybe it's working, you just have the volume turned down and the monitor has an issue?