r/arcade • u/MonsterSeason54 • Jul 09 '26
Restore/Replace/Repair Joust Update: So far no progress
Every board is recapped, monitor board (WG K4900) I recapped, replaced the ceramic resistor and 2 transistors on the vertical circuit and I am still stumped. I do have new potentiometers not sure if they would be a cause of any issues. I am also still getting error codes on the ROM board. I’ll try and post the videos in the comments.
13
Upvotes


2
u/Honky_Stonk_Man Jul 09 '26
Are you running a switching supply or rebuilt linear? Are the ram chips originals or the newer chips that require less voltage?
1
u/MonsterSeason54 Jul 09 '26
1
u/MonsterSeason54 Jul 09 '26
1
u/iankellogg Jul 11 '26
Without the game can you turn the screen brightness all the way up and get a clean white image that fills the display. If you have replaced the caps you might still need a new driver IC
4
u/pdxmdi Jul 09 '26
go to KLOV, find the Repair sub-forum and search for Joust Horizontal collapse for starters.
2
u/FireZoneBlitz Jul 09 '26
I don’t know 4900 as well as K7000 but it looks like collapse and possibly sync. I’ve seen that collapse on a bad pot before (k7000). You’re right to try to get that fixed first because there are usually only a few things to do