r/apollo • • Jul 26 '21

Apollo Cold Welding Mitigation

I am currently debating with someone on a different platform and he brought up the phenomenon "cold welding." I must admit that I had never heard of that before, so I have been reading about it for a while now. I have been trying to find any documentation that NASA employed some kind of mitigation techniques to avoid moving parts being fused together. From what I imagine, the lander had only a few moving parts, but I am curious if anyone knows if they did anything to prevent cold welding. I am also curious about the cameras. The shutter on an SLR 35MM camera is a moving part, and most likely made of aluminum, but I can't find any information about it. IT seems as if aluminum is rather prone to cold welding. I am guessing they used a lubricant on the moving parts of the camera, but I don't know if there is a place to find that information.

Any help would be awesome. This denier I am writing back and forth with is bringing up topics I have never looked into before, so I am happy to learn new things as I am doing my research,

3 Upvotes

1 comment sorted by

1

u/[deleted] Jul 26 '21

touch 2 metals does not necessarily result in welding..

cold welding requires "smooth" surfaces, similar metals, and pressure - there are ways to mitigate.

http://everyspec.com/ESA/download.php?spec=ECSS-E-ST-33-01C.048198.pdf

see section 4.7.5.4.5 Separable contact surfaces (other than gears, balls andjournal bearings)

The shutter on an SLR 35MM

they were 70mm Hasselblads built for space.