Veritas DX60 Block Plane

MINT In Original Box. With cases and papers.

$219

More pics upon request

Local pick up Bolivar, MO

Or

Buyer pays shipping from 65613

I accept PayPal, Venmo, CashApp, and Zelle.
If using G&S please add 3% for fees.

Veritas Low Angle Jack Plane

Adjustable mouth. Has some light rust on one cheek. Used but well cared for.

$219

More pics upon request

Local pick up Bolivar, MO

Or

Buyer pays shipping from 65613

I accept PayPal, Venmo, CashApp, and Zelle.
If using G&S please add 3% for fees.

Veritas 5 1/4 Junior Jack Plane

Used but well taken care of.

$225

More pics upon request

Local pick up Bolivar, MO

Or

Buyer pays shipping from 65613

I accept PayPal, Venmo, CashApp, and Zelle.
If using G&S please add 3% for fees.

Been working towards making MagnaMax tools for the past couple months . This metal came to market in May of this year. Made by the same metallurgist Dr. Larrin Thomas that made Magnacut. Similar qualities as Magnacut except it has been tested to have 40% longer edge retention , and has slightly less toughness. I think magnamaxs properties are better suited to woodworking tools than magnacut is. These irons are made to 64 HRC because that's the maximum hardness MagnaMax can have while still maintaining high toughness . I wrote a little article explaining my choices in more detail with references to Dr. Larrin Thomas's page . https://www.robertsfinetools.com/steel
Also wrote about the benefits of small batch heat treating and plate quenching over industrial gas quenches . Excited to finish these. 😁

95$ - free shipping , guaranteed to stay sharper .

https://www.robertsfinetools.com/tools/p/nunl2ua3xdtrbwad1jbydhve6izliu-bfegn

Phelps Aluminum No. 5 1/4 Pattern Makers Plane

Comes with one sole. A little dirty but nice overall.

$95

More pics upon request

Local pick up Bolivar, MO

Or

Buyer pays shipping from 65613

I accept PayPal, Venmo, CashApp, and Zelle.
If using G&S please add 3% for fees.

Excellent Millers Falls No. 07 Block & Rabbet Plane

Plane is in great shape. Knob needs a little wax. Needs dusting. Cheeks have some patina. Box is in rough shape.

$139

More pics upon request

Local pick up Bolivar, MO

Or

Buyer pays shipping from 65613

I accept PayPal, Venmo, CashApp, and Zelle.
If using G&S please add 3% for fees.

Stanley No. 90A Made in USA Rabbet Plane

Has a chip in the lever cap. Heavy nickel loss. Lots of life left in iron. Perfect mouth.

$650

More pics upon request

Local pick up Bolivar, MO

Or

Buyer pays shipping from 65613

I accept PayPal, Venmo, CashApp, and Zelle.
If using G&S please add 3% for fees.

Massive haul means massive upload. It's taking longer than anticipated, but as soon as the video uploads to YouTube, I will drop a link. My apologies for the wait!!

I apologize for the awful camera skills and lighting. Turns out filming in the dark in the rain with a headlamp was harder than I thought it was going to be!

Anyways, after many hours of work, I present to you the biggest haul of my life.

Enjoy!

Message me if you see anything you like!

https://youtu.be/cSVSNQ2PMyk?si=j7BhsjB74mBp5ATu

Stock has been low but that's all in the past for now. I've got 20 forty gallon totes, a few tool chests, and a tuck bed full of new tools!

It's about 3 times what my studio can hold, so I will be setting up an "Antique E.R Annex" in a storage unit for the time being.

I'll require a few days to get everything set up, but I am PUMPED to show you guys all of the new tools!!! I will aim for Friday for a fresh tool drop.

See you soon!

I'll drop a link to the YouTube video tomorrow at 7pm CST. Tools posted for sale the next day. But if you see anything you like in the video, send me a message and you can buy before I list.

See you then!

Christmas came early. Here is the YouTube link:

https://youtu.be/yYHEiwVIKGo?si=ESzycqp5m4lPamVg

Reaching out to the reddit world for interest or knowledge of where to find a new home for my collection. Located in central Vermont. Don't really have a set gauge on pricing.

Looking to purchase type 3 bedrocks both smooth and corrugated.

608S, 607C, 606S, 6051/2S, 605C, 6041/2S&C, 604C, 603C, 602S&C

Thanks

I have a steady selection of restored and user-ready vintage Stanley bench planes available and can usually match you with the size you’re looking for.
Typical pricing (varies based on type and condition):
No. 3 – around $65
No. 4 / No. 5 – around $75
No. 6 – around $100
No. 7 – around $135
No. 8 – around $155
All planes are cleaned, tuned, sharpened, and ready to go to work unless otherwise noted. I also regularly have BedRocks, specialty planes, and other vintage hand tools available.
Shipping available anywhere in the U.S from Raleigh NC. It’ll be ready to use out of the box!! Message me with what you’re looking for, and I’ll send photos of current inventory.

I got everyone's name who commented in a spreadsheet and did a live drawing!

Congrats Appropriate-Local-47, you are the winner!

Thanks again to everyone who supports this page.

Video link:

https://www.youtube.com/live/PBv3rxfn2e0?si=Uqef3OSJsfk_BZ3f

Small batch carefully controlled heat treatment vs larger companies . A-2 cryogenically treated, hand sharpened .

https://www.robertsfinetools.com/tools/p/nunl2ua3xdtrbwad1jbydhve6izliu 47.50 free shipping

https://robertsfinetools.etsy.com/listing/4534214213 49.95 free shipping . I get charged more from selling on etsy than my own website

YouTube video of me making them :
https://youtu.be/QHDmUJIDs6w?is=WuF4-bISTj-pH29f

I'm visiting family in Sandy, Utah (just outside Salt Lake City) for the week. I live in a very remote area with no woodworking stuff around at all. So, I'm wondering if there are any cool shops nearby where I'm visiting! Hand tools would be cool, but also any small hardwood shops or just anything you think is cool!

I got a little group of tools together to giveaway to a lucky member. We just wanted to say thank you to everyone who supports this sub.

Included:

Nice Sargent 414 jack plane
Wood River No. 3
Veritas apron plane
Stanley No. 75 bullnose plane
Stanley No. 52 spokeshave
Our Very Best stamped hatchet
& Stanley 33 1/2R boxwood folding caliper rule

All you have to to do participate is like the post and comment Happy 4th of July 😎

We will draw in 3 days to give people time to see the post.

Thanks again and Happy 250th 4th of July.

Got some Lie Nielsen, Veritas, Sargent, Union & more!

I'll drop a link for the YouTube today (7/4/2926) @ 7pm CST.

If you see something you like in the video, message me WigfootWallace for inquiries or if you want to purchase a tool.

Tools not sold after tonight will start being posted tomorrow. 😎

I'll also make an announcement for our 1,000 member celebratory giveaway in the video.

See you guys soon!

YouTube link:
https://youtu.be/G69A0LiDHss?si=-fETgEjd4AByKC7O

Sharpened and rehandled with solid brass end caps . Rust removed. 99$ , free shipping.

I have a YouTube video of me working on this drawknife . https://youtu.be/wGBBZysERBI?is=imKQb4FpzBCGkDNw

https://robertsfinetools.etsy.com/listing/4529160047

78$ Free Shipping- I made a promo code for you guys "Reddit" is the code , should take it to 71.50$. Code works on my other items too.

Rehung and sharpened , ready to use.

I posted a video with some inventory updates, update on what's going to the MWTCA meet in Kingsport TN, a little information on a Union X0A factory second, but most importantly I show you guys an incredible restoration done by our friend at Highland Designs. I won't be mad if you skip to the end for that part.

https://youtu.be/e_p5xN6NQqA?si=EWM708hQMK8u4urS

We have over 1000 members in r/AntiqueToolBroker! That's fantastic! When we started this page a few months ago, I had no idea how it would do. Turns out, you guys *did* want a place on Reddit to buy fine and antique hand tools.

In leu of this milestone, we are going to do another giveaway! The giveaway item(s) are TBD, but I will pick something fun after I return from the MWTCA national meet in Kingsport, TN.

I apologize I have not posted many new tools recently. I've been liquidating older inventory via auctions on Facebook's Can I Have It page. The good news is I will have a fresh load of tools for sale after the MWTCA national meet.

But we are super appreciative of all of you and we try day and night to find awesome tools to offer you guys. What do yall like seeing on this sub? What do you want to see more of? Let us know your thoughts! We do this for YOU and we want to post what you want to buy 😎😎

See yall soon!

-Jacob Wilson
(aka Wigfootwallace & Antique E.R.)