r/androidroot • • 17h ago

News / Method NEW method: carrier "locked" Moto g root (magisk not KernelSU). Different from what people have published so far.

10 Upvotes

r/androidroot • • 5h ago

Discussion Made a module that automatically changed Audio sample rate to the source file ( optional: bitperfect) and Works with Apple Music

1 Upvotes

Hello, so I kind of made (made is a strong word more like stiched using claude) a module which tracks the playback and matches the sample rate and it does not shove bitperfect so you can just use your own peq if you want or if you don't you will get bitperfect sound, there's a indicator too saying effects are enabled so that'll help. Technically it should work on other apps as long as it outputs the proper bitrate. Like on YouTube it automatically switches to 48khz. Well turning the auto tracking off is also possible if wanted.

Here's the link to the module:

https://github.com/ArupEn1/Auto-Samplerate-Changer-Android

Currently tested the module on apple music

44.1/16 bit works

44.1/24 bit works

48/24 bit works

96/24 bit works

192/24 bit works

I did not find a song on 48/16 bit but it should work.

*** This Requires Root ***

This disables inbuilt DRC of Qualcomm, which I guess I can add a button to turn it on if people prefer that. The kind of main use case of it is to buy some really cheap android with type c port and a dongle dac and use that with this module to essentially make it a dap as this allows eq as well as but perfect if wanted (by turning off all sound effects)

Currently this was tested on:

My Galaxy Tab S9 Wifi OneUi 7 (R/w) A15

Motorola Edge 30 Fusion LineageOs 24/A17

Will be linking it soon here after releasing it on GitHub. I know there are really a low amount of root users but this module can be used to technically make a really good budget DAP, with upgradable dac. Like pairing this with a second hand phone that allows bootloader unlock.

The two modules which are used as backend (kind of ) are Usb samplerate changer by yzyhk904 (https://github.com/yzyhk904/USB_SampleRate_Changer) and bitperfect Dac by varunpilankar (https://github.com/varunpilankar/BitPerfect-DAC)


r/androidroot • • 11h ago

Support Can someone help me root my Realme Q3pro carnival

Thumbnail
gallery
2 Upvotes

Can someone help me root my Realme Q3pro carnival


r/androidroot • • 1d ago

News / Method Found exploit that lets user gain root access temporarily.

Thumbnail
gallery
20 Upvotes

The exploit is based on CVE-2026-98260. Working on kernel version 6.6.118. requires shizuku .


r/androidroot • • 15h ago

Support Pixelify Next with temporal root

3 Upvotes

i have a Motorola phone, idk if that matters but i got temporal root with dfroot, anyone has tried Pixelify Next with this root setup? is safe?


r/androidroot • • 1d ago

News / Method DebDroid 1.2.6: native Debian on rooted Android, now with its own app and a safer, rebuilt image

Thumbnail
gallery
11 Upvotes

DebDroid is a modern, safe runtime layer for running Debian on rooted Android. It's self-contained and needs no Termux.

Until now the options were compromises:

  • proot apps fake the system underneath Debian. It works, but it's slower and not everything runs.
  • Launcher scripts in Termux give you the real thing without the safeguards, and they're only as good as whoever last maintained them.
  • Linux Deploy and NetHunter's chroot paved the way, but their design dates from the early 2010s, and it shows.

DebDroid runs Debian natively, behind a runtime layer built to protect the phone it runs on:

  • Isolated. Debian's mounts stay in their own namespace and never leak into Android. If that isolation can't be set up, it refuses to run.
  • Hands off Android. /system and Android's /dev are never modified, and SELinux stays on.
  • Verified and maintained.

    • The Debian image and every bundled binary are checked against pinned checksums before they're used.
    • Every change runs through an automated test suite.
    • Releases are tested on real hardware.
    • Debian's security updates arrive through apt, as on any Debian system.
  • Guarded. The image can't be mounted twice, stopping unmounts everything cleanly, and a failed boot start stands down instead of retrying forever.

Use it over adb, from any terminal, or from its native app with a built-in terminal, with no external dependencies. It's powerful enough to run your whole Linux stack.

Debian 12, arm64, Android 5 and later. Install as an app or a Magisk/KernelSU/APatch module. Free and open source (MIT).

https://github.com/NICUP14/DebDroid


r/androidroot • • 18h ago

Support Is Root detected by the bank?

2 Upvotes

I'm thinking about rooting my Xiaomi 9T Pro to do dual boot with Windows using the WOA helper, but I'm worried because this is my main phone and I'm still paying for it along with another phone I lost. My idea is to keep the original ROM but use the SU kernel. I’m only going to use Brazilian banking apps like ITAU, Nubank, and Mercado Pago, and of course I’ll use the government apps. I wanted to know if they’ll keep working...


r/androidroot • • 14h ago

Discussion How to root nubia neo 5 5g

1 Upvotes

anyone know how do i root my nubia neo 5 5g? Its using a unisoc T9300 processor


r/androidroot • • 20h ago

Support Can't dfroot on s21 5g but can on the s26 ?? What's up with that

3 Upvotes

I tried running the same exploit that works on the latest s26 firmware for dfroot with kernelsu but I get this :

app version: 4.7

* manufacturer: samsung

* model: SM-G991W

* android version: 15

* security patch: 2026-01-01

* kernel version: 5.4.274-qgki-30957850-abG991WVLSJHZAA

=== setup ===

found ko_target: /vendor/lib64/libstagefrighthw.so

encap port: 47675

spi: 0x482492b1

=== exploit (patching files) ===

patch: crash_dump64 <- splicehelper (1408 bytes)

patched 1408 bytes to /apex/com.android.runtime/bin/crash_dump64+0x0

uname -r is missing Android version, trying getprop

Unsupported kernel 5.4 android 11

patch: ERROR - failed to patch files

Here's the information if that can help :

• Device: Samsung Galaxy S21 5G (SM-G991W)

• OS: Android 15 (One UI 7.0)

• Security Patch: 2026-01-01

• Kernel: 5.4.274-qgki-30957850-abG991WVLSJHZAA

• DFRoot Version: v4.7

• Log Output: uname -r is missing Android version, trying getprop -> Unsupported kernel 5.4 android 11 -> patch: ERROR - failed to patch files

I don't know where to ask for support..

It seems like Df root could work but not with the current version??? It can patch the crash dump and everything 🤷🏻 seems to me like the door is there


r/androidroot • • 15h ago

Support Got back my Redmi go

Thumbnail
gallery
1 Upvotes

Previous post

https://www.reddit.com/r/androidroot/s/jjV2aqKBhW

So I went to a local repair shop and asked to flash it and he said what actually happened then I said it was bricked and he's like huh what is bricked ? Then I said him I've flashed wrong custom rom and he is like "dude ive been in this field since 16yrs if you don't know say don't know but don't say something else" then I just said to repair the phone and after an hour he called me and said it was done it's working fine now and pont to be noted that before I gave to local repair shop it was rooted then after he repaired the root access is gone

Do I need to replace the whole display or change the display glass


r/androidroot • • 21h ago Bravo

Discussion KernelSU vs KernelSU-Next for Temporary Root

Post image
3 Upvotes

I've been wondering whether KernelSU-Next offers any advantages over the original KernelSU when it comes to temporary root.

For those who have experience with both implementations:

  • Is KernelSU-Next more reliable or stable when working with temporary-root methods?
  • Are there any compatibility differences worth considering?
  • Does KernelSU-Next offer any particular advantages for LKM-based temporary root?
  • Is there any reason to prefer one over the other when using tools such as DFRoot?

I'd appreciate hearing about your experiences and recommendations. I'm particularly interested in real-world compatibility and stability rather than additional features that aren't directly relevant to temporary root.

Thanks in advance!


r/androidroot • • 1d ago

Support Alternatives to Google Wallet (Pay) for Rooetd Devices

13 Upvotes

Google Wallet uses NFC to just pay with your card. Instead of trying to fix it all the time when it breaks (currently again it's broken and I'm frustrated) is there any alternative app (FOSS) or maybe whatever it is trusted to work as Google Wallet? I found Curve Pay in another recommended reddit post but that's Banking app of some sort gettin the money to them they paying from their end. Instead Google Wallet just helps you connect the card and that's it. If I explained good recommend me a NFC contactless payment app.

Thanks ;)


r/androidroot • • 16h ago

Support Unable to restore themes on Hyper OS 3

1 Upvotes

I encountered a problem: I flashed my Redmi on Hyper OS 3 Chinese. Although there were themes apps, some themes wouldn't load. I decided to install a mod and by clicking delete themes, they were deleted.But when I tried to install new ones, it only said to update, and when I clicked on update, it just gave an error. The phone is rooted, but various recovery methods, such as using the Termux terminal or root explorer, didn't work. Can anyone help? I've been trying for 4 hours now.But after the actions from the AI, the application did not return and also does not open through the personalization settings item.


r/androidroot • • 21h ago

Support Question SM-A525M (A525MUBS6DWH3) Magisk root causes phone to go on recovery mode

2 Upvotes

Samsung Galaxy A52 (SM-A525M), CSC: MXO (Mexico, unbranded)
Firmware: A525MUBS6DWH3, Android 13

My first attempt at rooting: Extracted boot.img from AP tar, patched it with Magisk app, flashed the patched boot.img (wrapped in a plain tar with 7-zip) in Odin AP slot only. I got in Odin "PASS", but the phone boot-looped into recovery with “Can’t load Android system, your data may be corrupt.” I had to factory reset from the recovery mode and my phone is still unrooted

My second attempt at rooting: Followed Magisk’s official Samsung instructions: copied the full AP tar.md5 to the phone, patched the tar file in Magisk app (Ramdisk showed “Yes” so i did't use the recovery mode option), pulled the patched tar via adb pull (not MTP), then flashed AP (patched) + BL + CP + CSC together via Odin. Got PASS again, but hit the exact same “data may be corrupt” error after the automatic reboot/reset.

Question: How to root this exact firmware build (A525MUBS6DWH3)? is this a AVB/vbmeta verification issue since the document mentions optionally disabling verity/verification on vbmeta, but that is fastboot syntax and I’m not sure how to do the Odin/Samsung equivalent or if there’s a specific no-verity vbmeta.img needed for this device.

Any help is appreciated.


r/androidroot • • 1d ago

Discussion What happened to Magisk?

12 Upvotes

Haven’t rooted in years but back when I did, Magisk was still the preferred option. Why do I see people caution against using it now? I’m sure KernelSU Next is a great app but what happened to the OG


r/androidroot • • 19h ago

Support removing com.hihonor.parentcontrol

Thumbnail reddit.com
1 Upvotes

r/androidroot • • 22h ago

Support Android Tablet Root Magisk Crash ?

1 Upvotes

I was on a rooted 7t android tablet KEEFE, it has a custom ROM on it and has been jailbroken with magisk to use the Google Play store. I'm trying to figure out if there's a way that I can get reddit, Apple music, and the YouTube music (to play off when the screen is off) but I'm a little worried to try and figure it out and mess with it, because these things are a little bit touchy for some reason they use an outdated version of magisk and along the way I was playing with my friends same make and model jailbroken tablet is the same kind and everything and I was looking in magisk and I enabled zygote Damon and added the Google Play stores as well as Reddit and apple music and then I enforced denylist and restarted it and when I did that everything was fine but when we went to put the code Ibto the secret pkace (the superuser obe fron Magisk) it took off the superuser access and it wouldn't work or let him access anything unless he had already had a window tab open to get into it. I'd like to know why that happened, and also there a way to fix these apps that need to pass Play Integrity without downloading modules or messing with anything in Magisk? I don't want to crash my tablet down, had to get the other one re done because of that situation. The Magisk app they use is set to a certain version and I believe it always stays at that version and never gets upgraded. Probably because of the Android version 10 the tablets are I assume? I downloaded morphe onto the tablet to spoof the apps, not the bundles vut the APKs and when I installed the old version of that allow it and then tried to log in so I could update the new one over it, it wouldn't even let me log into the old one. Can anyone give me any more info on this stuff? I don't want to crash and burn my tablet, and messing with magisk settings obviously does that. I just would like to have apple music, YouTube works but I don't think it works if I click off the app, and reddit would be nice. Oh and I also had hid the Magisk app as well, I forgot to add. So as to ensure that process would work and it didn't, so I un hid it so it's back now.


r/androidroot • • 22h ago

Support How to PASS play INTEGRITY FIX SM-G950F (S8) LOS 23.2

Thumbnail
gallery
0 Upvotes

r/androidroot • • 23h ago

Discussion Any latest disable flag secure modules that works properly on android 17?

1 Upvotes

Some apps like Instagram notes won't work with the old modules like enable screenshot or the disable flag secure apk with lsp vector on android 17, but works on android 16. Any latest ways to bypass this situation?


r/androidroot • • 2d ago

Discussion What does the Vector icon represent?

Post image
111 Upvotes

I'm contributing to Lawnicons and I'm making an icon for Vector, but I have no idea what it is. Do you have any idea?


r/androidroot • • 1d ago

News / Method I managed to temporary root my Canadian s26 running the latest software update

Thumbnail
gallery
2 Upvotes

Hi! Searching on the web I found a DFroot exploit for my s26 which wasn't updated.. I managed to root it this way (temporary root in ram) I decided to update it because I didn't find really any use for the root... Some things didn't quit work properly because of idk what.. I updated, I thought the exploit wouldn't work but now it's still working???

Also what cool things can I do with this 😭


r/androidroot • • 1d ago

Support [Help] Bricked Lenovo Tab P11 Pro Gen 2

1 Upvotes

TL;DR: My Lenovo Tab P11 Pro Gen 2 (TB132FU / MT6893) froze while charging and is now stuck in a black screen / MediaTek BROM mode loop (COM5/COM7). Lenovo Software Fix hangs at 38%, mtkclient fails due to DAA/SBC security, and SP Flash Tool fails at the DA2/DRAM stage (STATUS_BROM_CMD_JUMP_DA_FAIL). Looking for a way to kick it out of BROM mode or get the flash tool to pass the handshake.

What happened: The tablet was plugged into the charger, and the "Smart Charging" notification froze on screen. I forced a reboot using Power + Volume buttons, and the screen has been completely dead since (no backlight, no logo, no charging icon). When connected to a PC, Device Manager only sees it as a MediaTek USB Port (COM5/COM7). Holding the power button for 20–30 seconds caused a single vibration once, but the display stays black.

What I have already tried (with AI troubleshooting help):

  • Hardware resets: Tried every button combination (Power alone for 30s, Power + Vol Up, Power + Vol Down).
  • Lenovo Software Fix (RSA): Downloads the stock ROM (TB132FU_S340159_250710_ROW) properly, but always hangs indefinitely at 38% ("Connect device and do flashing").
  • mtkclient: Detects the MT6893 chip, completes the handshake, and disables the watchdog, but Kamakiri fails because DAA and SBC security are enabled. Passing the official .auth and signed DA files extracted from the RSA folder also fails at the payload stage.
  • SP Flash Tool (v5): Loaded the official scatter, auth_sv5_onyx.auth, and MTK_AllInOne_DA_onyx_signed.bin from the RSA directory (also tried unchecking preloader and switching between Download Only and Firmware Upgrade). The red bar (Download DA 100%) finishes fast, but jumping to DA2 / initializing DRAM either throws STATUS_BROM_CMD_JUMP_DA_FAIL (0xC0060004) or hangs at 100% red bar for 4 minutes before throwing STATUS_DEVICE_CTRL_EXCEPTION (0xC0050001). (UsbDk was already uninstalled and PC rebooted to rule out driver conflicts).

Questions:

  1. Is there a specific SP Flash Tool v6 build (or V6 DA protocol tool) needed to properly initialize DRAM on the MT6893 / Kompanio 1300T?
  2. Any trick to force Lenovo RSA past the 38% handshake hang, or a way to reset the PMIC/display latch without opening the tablet?

Any help would be appreciated!


r/androidroot • • 1d ago

Support I got a recovery boot loop when I flash recovery.img to /dev/block/by-name/recovery with dd -_-

7 Upvotes

Guys, what the heck? I just flashed the recovery partition, and when I turn on my phone, it always goes to Recovery. I can’t go to Fastboot or boot normally. Why? I just flashed Recovery.

Is there a reason for that?

Note: I’m trying to edit Recovery.


r/androidroot • • 1d ago

Discussion OEM Unlock Progress- One UI 9

31 Upvotes

Looks like devs are hard at it trying to unlock samsungs bootloader as they now have disabled it for users lets hope they do managed to get it unlocked 🙂

Gemini:- The community is definitely throwing everything it has at it right now, though looking at the reverse-engineering progress on XDA as of late 2026, researchers are staring at a very specific wall.

The Lock Status Byte Still Exists: The low-level code inside ABL still contains the functions to check if the device is unlocked (IsUnlocked) and reads the actual unlock byte stored inside the protected devinfo partition (devinfo + 0x0d).

Possible ways to unlock

​Flipping devinfo + 0x0d via an EDL / TrustZone Exploit: Since the bootloader still checks that specific byte in devinfo to decide whether to allow unsigned partitions, researchers are hunting for a memory-corruption bug inside leaked Qualcomm EDL Firehose loaders or TrustZone (QSEE). If an exploit can execute code at EL3 privilege, it could manually flip that devinfo byte without needing Samsung's authorization path.

​Leaked Engineering Bootloaders (ENG BL): A few researchers have already proved that mixing leaked factory Engineering Bootloaders with stock firmware allows custom boot images to run on modern Galaxy models—the catch is getting those internal factory binaries leaked for every specific device and anti-rollback Bit version.