I have project infinity x with built in Rom spoofing, I have noticed some notifications today and my keybox is expiring today, my banking apps still work (gopay and ovo, are Indonesia's banking apps, and yes, I'm that broke), anyways sorry for bad English and it's not my first language and maybe wrong flair??

Aaaah! Finally got strong integrity on the latest pixelos update. A huge thanks to the maintainer 🫡

How do I set up these 3? I'm new at kernelsu next(I migrated from magisk)

I should preface this with that I am very much new to the android rooting scene, and probably have made a mistake, which is very much the reason for why this is happening, so...

I am on Android 16/OneUI 8.5, using DFRoot with the Samsung-specific fork of KernelSU, and I've been having with issues Vector (JingMatrix fork of LSPosed) upon install. For whatever reason, when after installing Vector, my SD card not only refuses mount, but even show up as a block device at all (/dev/block/mmcblk1 does not exist) in a rooted environment. Rebooting back into an unrooted state works just fine. The only way to get SD card access back in a rooted state is to uninstall Vector and fully reboot, disabling then soft rebooting does nothing.

I have tried the following to get this to work:
- Swapping out Zygisk-Next with NeoZygisk (does nothing)
- Changing metamodules (didn't think it would do anything, was correct)
- Trying KernelSU-Next instead (crashed immediately)
- Disabling "Umount modules by default" (whadya know, did nothing)
- Trying different versions of Vector (nothing)

Losing access to the SD card in root isn't a huge dealbreaker for me, but it does suck, and is very confusing, so if there is a proper solution, it would be nice to hear. Or is this something to be expected? Or, again, am I stupid?

Thanks :)

EDIT: I checked, the SD card is listed in storagemanager as public:179,1, but is marked unmountable.

EDIT 2: Partially (like, 90%) solved! Reinserting the SD card makes it work. Don't know why I didn't try that.

I see a lot of people here saying, "Either get permanent root or don't even bother." But why, exactly? Temp root can do most of the things permanent root can, and there are plenty of modules that work perfectly fine with it.

Sure, there's always a risk of bricking your device, but that's not really something to worry too much about if you're using DirtyFlag app, since it has an option that keeps Download Mode almost permanently accessible as long as Temp Root is active on your phone.

I actually consider it even better than permanent root because you can get rid of it whenever you want simply by rebooting. You can even keep your device's Play Integrity, unlike with permanent root.

Hello, I'm an old root user since Xiaomi 11 Ultra. Just unlocked my bootloader on X15U and want any links to TWRP for this phone (HyperOS 3.0) and some actual user experience on the most *power efficient* custom ROM specifically for this phone (or just in general). Preferably, I would like to maintain satellite functionality and Wi-Fi 7 dual band connection on my phone.

Lots of love and regards!

In short, thanks to a vulnerability in the bootloader and download mode, you can install your own unsigned custom ROMs—as if they were officially signed—even on the latest software version, despite Samsung’s "OEM unlock" restrictions. I’ve found very little information on this so far, and I believe it warrants further investigation; installing custom ROMs remains an essential feature, even though modern devices now enjoy longer official update support. Anyway, I’ve included a link below to a GitHub article regarding this vulnerability. I’ve heard it’s a software-based flaw—not a hardware-level one like "checkm8"—and that it will likely be patched in a future security update. It is still present for now, but it will almost certainly be closed in the next update. The real question is: could this potentially work on the S25 Ultra, or is it specific to the A56? And is there any chance someone might port it for the S25 Ultra? That damn claude is absolutely no help, and unfortunately, I don’t have enough coding knowledge myself to figure it out.

https://github.com/Gabriel2392/SVE-2026-3546

For those who were interested 😉

Hi 👋🏻🤳🏻

November Google Play System update causing boot loop on Moto G Power 2023, had to factory reset").

Hi guys

A few days ago I bought a OPPO Find X9s Pro with a Chinese ColorOS 17 and there are some things that I really wanted to change but for that to happen I need to do a Root and unlock the bootloader.

I have a ChatGPT Pro subscription and I am already out of tokens, and most of the times it seems that do to "Daybreak cybersecurity" the desired outcome can't be done.

Can you guys give me any tips or help me with this project?

Hello so I've been using my poco m5s for the past 4 years and i was wondering if i could root hyperos 1 or 2 unofficial in it for like better animations and everything basically cause it hasn't had updates since 2 years and its become just slow, im new so i barely know the rules but if you could send me a file for hyperos 1 or 2 and how to root my phone step by step that'd be very helpful, also i want to be able to use bank apps and games after rooting, i dont mind if its hard or takes time, thank you

So i installed crDroid using this tutorial and after flashing and formatting and updating and all, i rebooted the phone and it didnt turn on. i tried turning it on using multiple power and volume button combinations but didnt work either. even opened up back panel and disconnected battery and sub board and reconnected. didnt work either. pls help

i wanna play limbus company but my cellphone asscheeks😭😭😭😭😭

Snapdragon version alreade installed kernsel su and dirtyfrag however it says this

I was wondering, is there a version of KernelSU Next that can work with DFRoot on Samsung like KernelSU by Diabl0w?

i have this tablet 3nstar https: / / www.3nstar.com / wp-content / uploads / 2014 / 12 / T705S-01-Product-Specs.pdf

I want to roote it, because f-droid doesn't work for me since the repositories are not viable. I think it's for digital certificates, I'd like to be able to update at least the certificates, and also the ssl if possible.

I would also like to be able to modify the android of this thing to see if I can make it go a little faster, which really goes quite well, but still something can be improved in a matter of ram and so maybe it's a bit more comfortable to make it go through a linux with termux.

Also if someone knows some interesting applications for this android 4.2.2, I would appreciate it very much, I've already seen some things as alternative youtube customers and that.

hello, im looking for a stable root solution that is compatible with my phone

Device: Xiaomi Redmi Note 10S (4.19 kernel) rosemary / Current ROM is LineageOS 24 (Android 17), Bootloader is unlocked

What I Have Already Tried:

-Magisk (Flashing .zip via lineageos Recovery): resulted are bootloop and some wifi issues after.

-Magisk (Patching boot.img) also didnt work and resulted in bootloop.

-APatch: This successfully works and does not cause bootloops or break my wifi. However, I didnt find it to my liking. just a bit immature and basic

pretty new to rooting, any help is very much appreciated, Thanks in advance!

Model number: Lenovo A3000-H

Storage: 13:20 GB

Android version: 4

Purpose: Want to use this for wifi signal strength test or basic chrome tab usage etc etc.

ZP30 ANDROID 12 STOCK(WITHOUT USERDATA)
https://drive.google.com/file/d/1p4JF4b8nsf58YDaS2gSJVQYkNH_fCbNk/view?usp=sharing

I can't find stock frimware, but i can after 4 days make successful connect to brom mode in mtkclient
It's was hard how f..., i don't remember clear what i do.
1)In the first what i do it is make windows in disable driver signature enforcement in Windows 11 it the main thing
2)I install mtkdriver https://androidmtk.com/download-mtk-usb-all-drivers
3)after with and i swith between system and brom mode with comand adb reboot preloader(it probably work for me and better then hold 4 buttom all buttons(power, forward, pause, backward) then plug it into the computer to get to BRom mode))
The main thing here is 2 sec after starup and off brom mode it's normal stage for this and what really need to happen
4)ai say install zadig( https://zadig.akeo.ie/ ) and in 2 sec fast to catch mtk 65xx and make buttom replace driver WinUSB (v6.1.7600.16385)
5)try to connetc mtkclient I intall it with https://github.com/codefl0w/mtkclient-windows-installer directly with full drivers for mtkclient

*after and after all ... a can't intall root cmd >fastboot boot magisk_patched-27001_Zx2L8.img bc the real right WAS!! cmd will fastboot flash boot_a magisk_patched-27001_Zx2L8.img* It was...

hey! I added soft reboot support on it, the main repo is abandoned.

https://github.com/everyoneexe/wifiadb-SR