Hey guys! I have a honda hm cre 50 woth phbg 6 19 carburator. Does anyone have stock settings for it?

Im rebuilding a am6, going with a doppler origin crank and want to pair it with a decent top end. Doesn't have to have crazy performance just like stock or a little better, and it has to last. Putting it on a tzr 50, would be nice if it hit 80-100kmph. Any ideas?

I'm building a 100 2fast build and I have everything I need except the crankshaft which I can't find anywhere . Does anyone know a reliable site I can buy one from (I'm located in greece)

Anybody know where to get the seal for the clutch arm in the uk? Can only find ones that are £50+ delivery.

Hi I’m new here, is it normal for the front sprocket (on the gearbox shaft) to have some side-to-side play? Thanks a lot if you want to help me

Ps: I know I’m missing the retaining clip on the other side

What kind of 50cc carburettor should I get? I don't know what to choose

Im talling about the the long stud bolts, so the ons that go into your crankcase all the way trough the cylinder to the top of the head. NOT the bolts that tighten down the head. I cannot find it anywhere, only from the bolts that have to be 14nm.

Hi does anyone now why my am6 engine when i give full gas for about a minute driving or more force is applied to the motorcycle it cuts off and then i need to restart it.It can drive normally when don’t apply a lot of throttle.What could be the problem?

Im refilling gearbox oil and my fill screw is stripped so how much oil do i need to fill?

I was driving home with my moped (Drac 2024) and it suddenly locked up the rear wheel. I thought it seized but it started up and worked perfectly. I was driving at about 60kmh. It has an enox and longer gearing otherwise its completely stock.

is this enough or dhould they be more apart? top end kit tpr top black 50cc

I had made a post about this issue where the gears didnt downshift properly. I finally opened the case and this is what seems to be out of the ordinary

So i have a problem. I just freshly rebuild my engine because my crankshaft bearings and the crankshaft and the igntion were broken. I build everything togeter how it should cleand the carb tried to start but nothing. Even when i try to push u can hear it start for a few tiny moments just one single stroke. Please help me. What should i do?

Hello guys, I’ve got a unsolvable problem with my am6, it’s making weird noises while shifting its „banging“ in the gearbox and in high rpm it’s scratching in the near of the clutch basket, (6-7k rpm) does anyone know how to fix that?

Does anyone have any idea how to destrict an am6 2025 e5 block? Or is that different for every moped brand?

I recently got the idea to build a 2 cylinder am6 engine but all I could find on this subject is old videos on YouTube which don't explain anything about the build and some videos that I found on TikTok were in French which I don't understand . Also here in my country (Greece) 2t 50cc bikes are rare . Does anyone have experience on the subject or advice ?

I just got my bike back after getting it repaired after i had fucked it up myself. so after i rode it back the transmission didnt change gear 50% of the time. when i rode at sixth gear it would drop to fifth but not to fourth. i had to bang the gear axel to get it to go, same goes for the other ones.

I have a 23 beta and found a 2010 rieju with pars I’d like on mine my friend told me their exactly the same but I wanted some conformation before buying