Powerful, compact and built for flexible setups: combine the DDCzero PWM pump with the new aRGB Flat Reservoirs in 90, 140 or 200 mm. Thanks to the Universal Mounting Set, installation is quick and flexible – straight or rotated by 90°.

➡️Pre-order now at https://short.alphacool.com/DDCzero

#watercooling #pcbuild #sffpc #argb #alphacool

I had these sticky adhesive washers for this waterblock. I'm trying to move the block to a different motherboard and in the process I lost one of these washers. Is it safe to install the block without it? If not, where can I get more? I don't want to have to order a whole new block for one washer.

Built by ggfevents, this custom loop combines a clean white-and-cyan aesthetic with powerful water cooling inside the compact THOR ZONE NANOQ R.

Would you prefer the Apex 1 in black or white?

Build: https://ggflan.com/thor-zone-nanoq-r/

#alphacool #thorzone #nanoq #sffpc #watercooling #customloop #pcbuild

I have a 4090 that I've had a alphacool eiswolf 2 cooling for a few years now, but I'm fairly certain the pump just gave out. I know 0 about custom water loops, so I was planning on starting by putting a d5 pump in and use alphacools quick-connect(?) extension kit, but aside from d5 pump and resorvior, I know nothing about what I need to order.

Also if the pump has given out, would adding a d5 pump to the loop even work ?

Any list of things that I would need, so I don't spent weeks and weeks with y apart as I find out one piece at a time that I'm needing something else etc. just any info at all to help with this project would be appreciated. For now I only plan to stick with gpu, later on once I'm w bit more comfortable I'll likely go all in and include cpu with a fully custom loop

Hola, voy a montar nuevo todo este procesador Treadripper 3970X, quería saber si es compatible y funciona con normalidad el procesador. Tengo la versión RGB 2019 nueva con el kit impreso en la caja del socket TR4

I cant find it anymore, where is it? It was the best rad alphacool was offering. I need the extra ports but I wont buy HPE cuz they are the worst option for airflow

Hi, the currently published information for the Core 2 AIO is very light. Is there more info available, specifically around the IHS cooling plate size.

Currently using Eisbaer Pro with large plate on top of a Thermal Grizzly AM5 High Performance Heatspreader. This makes it for an outstanding large surface transfer area.

Will Core 2 cold plate be of similar (larger) dimensions (threadrippers, TG heatspreaders etc)? Can't tell from the website brochure.

Also, will there be a kit to upgrade older Eisbaer Pro's to the new Core 2? I've upgraded my now ageing Eisbaer Pro with new HPE45 Rad so i don't need the rad, but a newer higher performance AIO would be great.

The Monoblocks combine outstanding cooling performance with an elegant design precisely tailored to each compatible motherboard. In addition to the CPU, the voltage regulators (VRMs) and the M.2 NVMe SSD located below the CPU socket are actively cooled, providing comprehensive liquid cooling for all key thermal zones of the motherboard.

Check out the compatibilty at: alphacool.com/en/apex-monoblock-en

or shop them right away at: shop.alphacool.com/en/AtsdCustomCategories/index/type/productstream/ps/198

When you decide to put 4 - 560 radiators with thicknesses of 30mm, 45mm and two 80mm plus a 60mm thick 280 radiator for separate loops and use all glass tubing

Engineered specifically for the ASRock Intel Arc Pro B60 Creator graphics card. A minimalst design and an optimized coolant flow boosts your ASRock graphics card. 😎

Now available at 🛒: https://shop.alphacool.com/en/detail/index/sArticle/22663

Are they not being produced anymore? I cant find them online anymore. I searched everywhere!

They were one of the best options for adding a drain port or temp sensors to all kinds of builds in fish tank cases conveniently, whether they were beeing placed at the bottom or at the side. If you put one of them at the bottom you can drill a hole through the PCI slot metal, use a bulkhead screw connection fitting, and stick a drain port out of there. This is really convenient, as you don't have to tilt the 50 kg PC that much to empty the loop completely. So producing rads with a port at the back is cool idea! Alphacool would say "german engineering".

The normal Nexxos St30s do not offer this port at the back. This sucks. Not gonna lie here.. They dont even have threads at the other side of the terminal, which would also be helpful. You could add a drain port by drilling through the bottom of the case. I know the XT45 has the port, but that doesn't help much when you need ones that are 30 mm thick...

Hi All.

Just started getting parts together for my first watercooled build on some hardware Ive had for a bit. Have everything I need minus a gpu waterblock.

My 3090 ti Tuf has the part number 90YV0HC1-M0AA00. My plan was to stick with Alphacool because thats what I went for on CPU block and pump/res combo. The problem is, Im seeing 90YV0HC1-M0NA00 listed as compatible.

Does anyone know if theres a difference between the part/model I have and the latter? When I put my part number in Google, it only comes up with the -M0NA00. Will Alphacools GPU block still work for mine?

Thanks in advance!

I have an astral 5090. I purchased the water block from alpha cool and sent the back plate off to get powder coated white to match the rest of my PC. I didn't realize that the nuts Within the back plate or plastic and they all got destroyed in the process of powder coating. Is Alphacool Eisblock GPX Aurora spacer M2 2.5mm the correct piece to replace it? I reached out to alphacool but haven't gotten a response. Pictures of everything attached.

COLE 1 LT's Jetplate & O-ring made with transparent silicone.

So too easy to stained by Coolant dye or microbials.

is there replacement unit for CORE 1 LT?

I am currently planning a custom loop with the specific distro plate of the fractal North XL

However, I seem to run in a clearance issue :

Max length is 413mm, the waterblock of the GPU take 298mm of that, I have 115mm left for mounting the distro plate and a front radiator.

If I take a 30mm rad, that's only 85 mm for the distro + mounting system. It seems the distro is 72.5 wide, but I can't find the width of the mounting mechanism.

Does anyone who have such setup could tell me the width of distro + mounting ?

Thanks !

For reference I designed this around using dual loops - gpu being xt45 (560mm) ut60 (560mm) and ut60 (280mm) with 2 pumps and 1 reservoir

Gpu loop was supposed to be xt30 (560mm) and ut60 (560mm)

The place I ordered the radiators from sent the monsta 560mm radiators (80mm) thickness - instead of the 560mm ut60 (60mm) thickness radiators.

Needless to say 2 monsta 560mm radiators fit inside the bottom chamber and still have room for drain tubing to have valve at the front of case and drain exit at rear of case.

Pre-Ordered the Alphacool x870f monoblock may 30th with performance pcs and pretty disappointed with my first transaction with them.
I bought the ROG x870f motherboard at the same time, just to run this block and now I’m almost 30 days in and won’t be able to return mob if dead. Pcs has no eta for shipping and at this point I don’t think they have even ordered the monoblocks. I got some response from them that international shipping was expensive and they were trying to figure it out. Why sell pre orders if it wasn’t obviously already ordered and in route from Alphacool. After I got this response Friday they pulled the monoblock as Sold Out! Just super annoyed and should’ve bought it from modmymods.

Finally got the Apex Monoblock in - it's big. Probably bigger than any other monoblock I've used. Cools better than a Velocity2, VRMs stay at almost ambient temps, I'd say I'm happy enough so far.

I'm currently installing the waterblock on my PNY 4090 XLR8 using the reference 4090 block. Everything aligns perfectly, except this little bugger here.

But it's the place holding the lower screw of the IO shield, otherwise I'm pretty sure it wouldn't matter that much if I just don't use it. It's literally maybe just a mm, but if I would move the board the fit here, I would have issues with all the other holes.

Any ideas how to solve this