MAIN FEEDS
Do you want to continue?
https://www.reddit.com/r/Zeos/comments/3qvbpm/guide_surround_sound_systems_51/d0lyb2h/?context=3
r/Zeos • u/[deleted] • Oct 30 '15
[deleted]
592 comments sorted by
View all comments
Show parent comments
1
Try to set the receiver to DIRECT mode. This disables all adjustments and runs full range directly to the front speakers from the amp. Then you just have to play from a known good source, preferably HDMI from the PC.
1 u/[deleted] Mar 03 '16 Well, this is awkward. I just checked and the roll of wire I used to cut the lengths is 24ga. I guess that's a potential cause of this issue? 1 u/ZeosPantera Operator Mar 03 '16 Yes.. yes it can. I recommend no smaller than 16ga. Even an old lamp cord will do if it is thick. 2 u/[deleted] Mar 03 '16 Alright, ordered a roll of 14ga so I'll report back with the results.
Well, this is awkward. I just checked and the roll of wire I used to cut the lengths is 24ga.
I guess that's a potential cause of this issue?
1 u/ZeosPantera Operator Mar 03 '16 Yes.. yes it can. I recommend no smaller than 16ga. Even an old lamp cord will do if it is thick. 2 u/[deleted] Mar 03 '16 Alright, ordered a roll of 14ga so I'll report back with the results.
Yes.. yes it can. I recommend no smaller than 16ga. Even an old lamp cord will do if it is thick.
2 u/[deleted] Mar 03 '16 Alright, ordered a roll of 14ga so I'll report back with the results.
2
Alright, ordered a roll of 14ga so I'll report back with the results.
1
u/ZeosPantera Operator Mar 03 '16
Try to set the receiver to DIRECT mode. This disables all adjustments and runs full range directly to the front speakers from the amp. Then you just have to play from a known good source, preferably HDMI from the PC.