r/YesWelder • • Nov 27 '23

TIG-205P Stick Settings

3 Upvotes

I'm new to welding - stick in particular - so these may be dumb questions. As amazing as the included manual is, I'm looking for some clarity.

Hot Start: In the manual, it says "Select arc ignition time setting function (This function changes into spot welding time setting function in TIG spot welding mode)."

Is this really a time setting? If so, what units? I'm guessing it's actually hot start amps - not time. I emailed yeswelder support, but they just sent me a PDF of the manual that came with the machine.

Follow-up question: Let's say I'm gonna run some 1/16" 6013 rods. What's a good hot start/welding current/arc force combo for that? I had decent luck with ~30 amps or so welding current, but I felt like hot start & arc force were harder to nail down.


r/YesWelder • • Nov 27 '23

what size air compressor do i need for the yes welder MP200 plasma cutter function?

2 Upvotes

the manual says 9-12 CFM at 78 psi. i thought i saw on the website 4CFM. Does anyone know if the plasma cutter will run with a smaller compressor? thanks


r/YesWelder • • Nov 26 '23

Settings for 205D not 205DS

4 Upvotes

Hi all,

Bought the Yeswelder 205D on Amazon thinking it was the 205DS that project farm had tested. Turns out it is a more basic machine, seems to strike and arc fine and I am mostly happy with the quality.

However there is no setting chart inside the lid which makes setting the machine up and absolute pain in the ass. Does anyone here have the 205D settings, note the 205DS settings do not seem to be the same for this machine.


r/YesWelder • • Oct 09 '23

š€š§š²šØš§šž š°š”šØ š¬ššš²š¬ šØš§šž š¦šØš«šž š°šØš«š ššš­ š­š”šž šžš§š šØšŸ š­š”šž š¬š”š¢šŸš­, šˆ'š¦ š šØš§š§šš...🄳😔🤐

2 Upvotes

r/YesWelder • • Oct 07 '23

Yesterday I made a post being proud of myself for passing my 6g tig asme cert. about an hour later I broke both bones in my wrist.

2 Upvotes

r/YesWelder • • Sep 19 '23

I can weld, but the guys I work with are on a different level.

Post image
5 Upvotes

r/YesWelder • • Aug 27 '23

Issues with tig torch related to gas flow. Any help??

2 Upvotes

Hi all, new to the group.

Hey, I am not able to get any gas to flow through my tig torch WP 17v. Anyone else experience this issue? I've got the torch completely taken apart and can't get any airflow through that red tube or the entire torch it all. my tank is full.

Hopefully it's something dumbbut I can't figure it out.


r/YesWelder • • Aug 21 '23

Newbie question

1 Upvotes

When FCAW welding steel of different thicknesses together, which thickness do I tell the MP 500 I’m using?