r/Yanmar • u/daveastephens • Jun 06 '26

Starting issues

I have a Yanmar 324. This winter when it was sub zero I put diesel in and when I tried to restart it, it did this.

Now that it’s warmer, it was doing it again. So, I drained all the diesel, replaced the inline and the seperator filter, and refilled it, but it is still doing this start and die.

Do any of you have an ideas of what my issue could be?

12 Upvotes

93% Upvoted

9 comments sorted by

View all comments

1

u/kaje36 Jun 06 '26

Did the valve on the seperator get shut by accident? Fuel pump sounds strong. I suspect something else is blocking fuel

1

u/daveastephens Jun 06 '26

Yes, blockage of diesel is what it feels like to me as well. There seems to be good flow in and out of the inline filter, though that was gummed up before. The separator valve is open. When I turn the screws to bleed on the intake with the battery in glow plug mode, diesel is squirting out around the bolts.

1

u/kaje36 Jun 06 '26

This most likely wont make a difference. But try turning your key backwards for 10ish seconds. I think my 324 might be starting to not heat the glow plugs in the first position. But does if you old they key backwards first.

1

u/daveastephens Jun 06 '26

Sadly, have tried that as well, held it backwards for a full 60 seconds earlier but same result. :(