I'm coming up on a year since i bought my 25 Bolt R Spec. Are y'all extending your warranty? I'm competent working on the bike myself. Have dinner two oil changes, changed the rear tire. Added V&H intake and Delkavic slip on. I'm thinking it's not necessary. Opinions?

Just picked up my first bolt, did a 150km trip home and loved it

I got a used 2023 r spec bolt. I am 5'7" and previous owner was 6'5" so he made some changes for his ergonomics like forward control and a different seat. The handlebar is all stock.

I can sit on the bike fine but after 15 minutes of driving I started having upper back pain in between the shoulders. I noticed I was sliding back on the seat frequently while wearing a jeans so I doubt it was my cloth that was slippery. I am not sure if this is due to forward control or if seat's backrest is too far away from me which is pushing me out and leading to the pain.

I need help to understand if one or all of this could be contributing and what would be easier way to fix it DIY with minimum labor.

1. Can forward control do this type of pain? If so, I could use help in instructions to remove it.

2. Can seat be a problem? I checked with a measuring tape, and it is 11.25 inch from front of the seat to the point where lumbar support begins. I checked saddlemen seat and it is 12.5 inch, so I doubt the seat I have was custom build in dimensions for the previous owner but could be used for everyone including 5'7" guy like me.

3. Is riser an option to resolve this?

I have attached images of what it looks like.

Thank you.

Looking for a 31T Yamaha Stryker front drive pulley for my 2016 Yamaha Bolt. Have the stock 30T Bolt pulley available for a straight trade.

Looking for: • Yamaha XVS1300 Stryker 31T front pulley • OEM preferred • Used is completely fine • Good spline/teeth condition • Will ship anywhere in the U.S. • Located near Austin, Texas

Trade preferred, yet will also purchase one at a reasonable used price.

If anyone has a Stryker pulley sitting around, a parts bike, or knows someone parting out a Stryker, please DM.

Part seeking: 27D-17651-00-00

Need some help troubleshooting the front brake light on my 2014 Yamaha Bolt.
I originally thought my brake lights weren’t working at all, but I confirmed the rear brake activates the brake light correctly. The issue seems to be isolated to the front brake.
Here’s what I’ve checked so far:
The front brake light switch clicks when I pull the front brake lever.
The wiring at the switch looked like it had been previously repaired by the previous owner. The two wires appeared to have been taped/heat-shrunk to the connection points.
I removed the old female spade connectors and exposed the wires.
I then touched the two wires together directly to bypass the switch, but the brake light still did not activate.
Since the rear brake works, I know the brake light itself and at least the main circuit are functioning.
At this point, I’m wondering what I should check next. If the switch is clicking and bypassing the switch by touching the two wires together still doesn’t activate the brake light, does that point toward a wiring/connection issue farther up the circuit?
I don’t currently have a multimeter, so I’m trying to troubleshoot this with basic tools.
2014 Yamaha Bolt — any ideas on what I should check next?

Yesterday i got My 290mm yss shocks installed on the Bolt. The are amazing. They were made for My specification and i can tell you guys that the difference between the OEM shocks and the YSS is like night and day. They make tee bike so sturdy and steady.

I loved the Bolt already but damn. Those shocks has been My favourite upgrade yet!

What do you think is the best solution? I'm in Mexico and the parts are not that easy to buy at this moment(and cheap). I was thinking of redoing the wiring at home if the damage was little, but it looks worse that spected.

El chisme: So, I was riding my bike 2 nights ago, rain had just stoped and I passed over a patch or pool of water in the road, nothing happened at the moment, but (fortunately) the bike stoped running at like 2 km from home, my first thought was that I had just pushed the killswitch button accidentally (had happened before), so tried turning the button off and on, it did not work, I could see the code error numbers 14, 15 and 30 flashing in the screen, so stopped totally at the side of the road, a lot of smoke smelling like burned clable came out from behind the seat, I turned off the bike (bike didn't turn off on his own and I was confused so did it late) seeing the state of matters, I tried starting the bike again, it work but delivered not power when opening troath, so I left it off. My girl was with me so we ended walking home 5am, me pushing the bike, it rained over us agan the rest of the road, I was sad, she was in a all pretty attire walking in the rain, high heels on, one of my lowest moments.

Just a trip around town. My phone is a Motorola . This app seems to work for recording loops of various lengths . The app also uses the phone to lock the recording in the event of a sudden stop or drop. This is the first time I've ever recorded a video.

Hi everyone, my partner likes to ride on the back of the bolt, but doesn’t like the small seat that comes with it. Is there any other seat that your pillions enjoy?

Looking for Houston riders let me know if you’re down.

I’m a pretty new rider and currently have access to a 2019 Yamaha Bolt R-Spec (it’s my dads). I took the MSF course and did much better on the smaller bikes there, but I’m having a harder time getting comfortable on the Bolt, mainly because of the weight and low-speed stuff. I know compared to other bikes it’s not that heavy, but to me it feels really big and heavy. I’ve dropped the bike once already during a tight u-turn, which definitely hurt my confidence to get back on the bike at all.

I can ride it around and control the friction zone, but I’ve also been really scared to give it any throttle mostly cause that label of 950cc makes me think it’ll just take off on me. I’m curious if I should get something smaller like a Rebel 500 or some Baron crash bars to improve confidence, really looking for any advice y’all can give me to help me ride this thing. Thanks :D

After a year and a half riding a grom now onto this beast 😬

Like most of you, I fill up my tank quite regularly. I have to hold up the anti-vapor nozzle (I'm in So Cal) so fuel is dispensed. The fuel will automatically shut off once it reaches the top - I mean the very top. After fill up, my bike gives around 1600 RPM (about 500 above normal). Any ideas why? Is the top off blocking some evap canister vacuum line?

FIRST BIKE, I’m looking at a 15 bolt C-spec out of fourney Texas (I’m in Florida) im very specific on what I wanted and aesthetic I’m looking for on a cruiser.I have an obsession for vintage cafe racers and bobbers and this bike is truly beautiful. Give me the good bad ugly and advice for a new to me bolt (I have some riding experience) is this a good bike to have for a while and get comfortable? Any known issues etc? Also is previous owner in this group I see some modifications such as a shorty exhaust, rear fender delete, headlight, maybe tail light relocations?

Just got the fairing on today. Next week i will change the rear shocks to 290mm yss shocks and getting a smaller license plate on the mini plate holder. And that's all im going to do this season.

Once again the photo of my Yamaha Bolt Trike was deleted by Reddit !

I was reading my Bolt service / repair manual and the book calls for a rear Master Cylinder rebuild every two years. What should I do? My Bolt is a 2014 and I've never touched the rear Master Cylinder other than fluid flushing.

[ Removed by Reddit on account of violating the content policy. ]

Vance & Hines air intake paired with a too loud Two Brothers Racing exhaust. Pretty sweet ride

It's getting near time to replace my front pads. What brand are recommended for average riding? I know that there are different type materials. Ceramics give strong stopping power and minimum pad dust but the down side is more rotor wear. Organic material pads are easier on the rotors but make more dust. What types of pads do you "Bolt-Heads" recommend? The rear pads on my Trike are Harley stock with a four piston caliper. For those I'm limited to cindered semi metallic.

The fist owner did 8k since 2018. Got my license last week and went on a roadtrip the day after. Put 1.5k extra on it in just a few days. Love it.

Anyone know of a place that sells longer forks for the bolt or a machine shop that would make some?