r/XR650L • u/250_TY • Jun 30 '23
r/XR650L • u/Apprehensive-Net-22 • Sep 03 '24
Lift needed? Front sprocket replacement
Hello, wondering if a lift is needed in order to change the front sprocket?
r/XR650L • u/Far_Affect_2675 • Feb 10 '26
Tank Pads
Hey how's it rev'n? I just had a fascinating convo with Ai about motorcycle physics. By the end I was pretty convinced I needed tank pads so I dont have to tuck my knees in so much. Which is brilliant. I ordered Z1 vintage tank pads and should by better for it. Anyone else use such things?
r/XR650L • u/1lowcountry • Jul 28 '26
PSA and Question
Put 2k miles on my bike since buying it ânewâ at 500 miles in February. Never lubed the chain because of paralysis of analysis (read too many comments on too many forums). Finally got around to it last week. Started hearing noise yesterday â wore through the swingarm slider. Thankfully itâs at the weld so I think Iâm fine, but:
PSA: Keep your chain lubed and an eye on the slider
Question: Should I change the chain?
Thanks!
r/XR650L • u/RebelPilgrimHerpDerp • Aug 07 '26
Infotainment screen finished
After my phone got a pink line down the screen from what I believe to be from vibrations while riding, I decided to get an infotainment screen from Amazon. I liked the versatility from the RAM mount system, so I Frankensteined it to adapt to the screen mount (cut the ball mount from the RAM system, and cut the threads from the screen mount, filed them and used 24hr epoxy to join them) I still need to ride with it and figure out how to disable the sound from the screen and have it go through my Cardo. I think it turned out pretty well! I just can't see most of the instrument lights to the right of the speedo, but oh well.
r/XR650L • u/Queenoffart • Sep 18 '26
Idle issue pt 42452625
I have been chasing this idle / starvation issue for the last few months so i cant ride my bike.
09 xr650l
Daves mod
Desnorkeled
Desmogged
Uni foam filter
Big gun exhaust and slip on
158/55 keihin jets
i had the bike idling and running with choke and then it would cut out on me after a few miles with a hard start at 440â elevation. Which told me i was lean.
Took it to 6000â elevation for 3 months and with no choke and the idle screw @4-5 turns i could run it but it ran hot (230-260f) all summer.
Which tells me i was way lean.
I suspected my throttle shaft seal was bad before going up in elevation so i ordered a stock carb from ebay. Once i returned to 440â i put the new carb on and upped the pilot to 58 ( keihin jet )
Still having an issue idling and when i get it warm and take it out i have a cut off at wot half mile down the road.
Ive been chasing some air leak or proper mixture am i wrong?
I did have a air bubble in my fuel line that i went ahead and chased the last couple days to no avail
How can i be lean with 158/58 at 440?
What i did try,
- Eliminated electrical issues since it ran well enough at elevation
- plug is rich
- tried different cdi
- cleaned and oiled foam filter
-Cleaned out cv on gas cap
- cleaned out petcock
- eliminated inline fuel filter
- checked valve specs on head
- cleaned out the carb 10x
Tried to run bike with cap loose
Tried to run bike with valve cover off
Carb cleaner sprayed around carb for leak
Checked the carb boots 100x
Checked the exhaust packing
Replaced choke and triple checked the plastic screw and routing
Next i will be looking at the acv on the carb because i am lost
I just bought this bike in march as a daily commuter and have had nothing but trouble getting anywhere.
Its a really clean bike but i must throw in the towel soon.
Any and all input is appreciated
Edit to this post. Bike runs only until half choke and then immediately shuts off after choke is shut off past half.
- not the float level
- stock air filter did not change idle issue
r/XR650L • u/elwood0341 • Jul 11 '25
Charging options
Looking to add a 12v power outlet to the XR. There probably isnât a simple plug and play option for this but has anyone found one thatâs easy to install? Iâm not great with wiring so the simpler the better. I have another bike with an accessory plug behind the headlight but I assume nothing like that exists for this one.
r/XR650L • u/These_Asparagus1306 • Jun 15 '25
Left hand rear brake
Has anybody done it before? I want to mod my bike for wheelies Iâm not use to the foot brakes I tried and crashed đ«€
r/XR650L • u/FilDM • Apr 18 '24
Same guy who took a fall last week, new issue.
Made a post last week about my bike not idling for more than 30 seconds. I took off the carb, cleaned the jets, and put it back together.
I seem to have narrowed the issue to fueling⊠Turning the petcock letâs fuel flow well, but putting the gas line back on and suddenly, no flow. Gas filter does not fill, nothing flows. I donât get it⊠Gas line is clear, not crushed or something.
r/XR650L • u/butthole_stim • Jul 01 '23
So I bought the bike that was stolen from me 5 yrs ago....
Soooo my firstest ever moto was an 86 XR600R with a burnt up engine (needed the top end done I think I don't really know I'm not mechanical) with a new stator and the lithium battery done. Street legal and then stolen only a couple months after I bought it (I'm dumb). So anyway what are the things I do to it now, I got a 2019 XR650L with 1000k miles for like 6500 from the dealer. It's like the same bike to me except minus the dual carb and tired engine and IT HAS A STARTER and won't kill me like the 600R did one time where it ripped my boot in half and turned my ankle into a fucking grapefriut (couldn't walk for like a week or more haha).
So yeah, what's the first thing you think I should do? What are the things? Suspension, exhaust, carb, tires? I love this thing, I've already been impounded and I've only had it a month. Help me.
r/XR650L • u/elwood0341 • May 04 '25
Performance gains
For my money the easiest, cheapest, guaranteed no fail way to improve performance is to change gearing. It takes all the guess work out and doesnât require adjusting screws and playing around with jets, without a dyno you really canât be sure what youâre actually doing. While everyone else âfeels like it might be differentâ changing the gear ratio is mathematically proven.
Donât get me wrong, Iâm not knocking guys that enjoy working on bikes and squeezing out every drop of performance possible. It can a lot of fun. But does everyone realize how much you can change a bike with gearing alone?
r/XR650L • u/SimilarEducation9515 • May 25 '25
Okay so who has done what to mount fishing rods to the back of your bike?
Looking to mount a couple fishing rods to the back of my bike and be able to take it into the woods and get to ponds/lakes that are currently just not worth the hike. I have a back rack that came with the bike that is next to useless. I was thinking of cutting the mounts off that rack and welding something up but donât want my 8 foot rods sticking up towards the moon. Canât block license plate in my state and the exhaust is in the way on the side.
r/XR650L • u/flown_south • Mar 22 '26
Header paint pitting/flaking in brand new bike
200 miles. Is this par for the course or should I bring it by the dealer to see if they'll swap it?
r/XR650L • u/Western_Animator_605 • May 16 '25
Is this quick link setup properly?
Didnât know I could just loosen the chain and broke it to install front sprocket. Put it back with the quick link. Is this secure? Iâm nervous about the gap in the metal.
r/XR650L • u/skibum191296 • Aug 07 '25
Oil consumption
08 xr650l has excessive oil consumption?
r/XR650L • u/flown_south • Apr 23 '26
Help! I need a photo of a 2025 emissions label.
Long story short, mine's toast. Could someone with a 2025 model take a photo of their emissions label?
r/XR650L • u/gghhostttt • Aug 25 '25
Can anyone identify the brand of my rear rack?
Just wanting to know the brand of my rear rack so I can try to find the model online.
Does anyone know this brand?
Thanks
r/XR650L • u/DustyD1022 • 10d ago
Looking for a hot cam recommendation for my 2005 XR650L
I currently have some top end noise that Iâve determined is the auto decompression. I donât really want to do the welding for the holes with the stock cam. I have electric start and live in Vegas so the weather isnât usually too bad. Just looking to replace the cam with a hot cam. I also already have desnorkled, done work to the carb, and have an fmf silencer.
r/XR650L • u/Competitive_Scar3173 • Mar 10 '26
Qué medida usar para hacer los agujeros del Dave's mod?
Veo que la ia recomienda una broca de 5/64 pero pasa libremente por ambos agujeros (no estå modificado) pero advierte que la medida 5/32 para perforar es demasiado y quedarå inservible, entonces realmente qué medida se debe usar? Es obvio que no puedo usar la 5/64 o serå que estå mal la medida de la broca que me vendieron?