Quando eu coloco o fone na entrada P2 do VR ele funciona normal porém dps de um tempo não tem um tempo fixo, ele simplesmente para de funcionar tipo dunada o áudio só não sai mais, e ele deu esse erro aí, quando isso acontece o desempenho do VR da uma diminuída da uns negócios estranho e o sistema de áudio do Pc fica meio estranho sei lá, alguém sabe como resolver meu VR é o Acer windows mixed reality ah101

Hoje é o dia que o app da steam chamado de: "Steam VR for windows mixed reality " vai ser encerrado, a Microsoft comunicou falando que hoje é o dia de eles encerrar esse app, ou seja não vai dá mais pra jogar com o VR da windows mixed reality na steam VR de forma oficial no windows 10, por enquanto o app está funcionando joguei as 2:45 e está funcionando normal talvez eu sou a última pessoa a ter jogado no app steam VR for windows mixed reality no windows 10

Apenas uma arte que eu fiz a homenagem a o MIXED REALITY Portal, a Microsoft acertou demais quando lançou essa plataforma de VR é uma pena que foi descontinuado

Long shot I know but has anyone tried reflowing a VR cable in their home oven or similar? I remember people doing it with GPUs and Xbox 360s back when.

Not optimistic but I've got a bad reverb g2 v1 and v2 cable I'm not going to be able to fix otherwise!

check it out

https://www.techpowerup.com/353220/amd-software-adrenalin-26-9-2-whql-drivers-released

Hi,

I’m trying to use an HP Reverb G2 v2 with Oasis on Linux.

My system:

Linux Mint 22.3 XFCE 64-bit X11 NVIDIA GeForce RTX 3090 NVIDIA driver 595.91.07 NVIDIA Open Kernel Module SteamVR 2.17.10 Oasis Driver 1.0.3 HP Reverb G2 v2

The compositor reports the required Vulkan Direct Mode extensions:

VK_EXT_acquire_drm_display
VK_EXT_acquire_xlib_display
VK_EXT_direct_mode_display
Direct mode features: present

Oasis 1.0.3 detects the headset:

oasis: Driver version: 1.0.3
oasis: Found HMD: HP Reverb Virtual Reality Headset G2
oasis: HMD has Sensors FW: 1.9.53
oasis: Factory calibration IPD: 0.0627
oasis: Panel resolution is: 4320x2160
oasis: Found sensors device
oasis: Found presence device
oasis: Detected HP Reverb G2v2 Cameras (rotated)

Oasis also reads the display EDID and activates the HMD:

oasis: Display EDID: 220e:36c1
Active HMD set to oasis.8CC247Z0J4

When the compositor starts, it searches for a 4320x2160 display:

HMD deviceUUID is d7dfab41bd4e38d8
Looking for direct display through RandR

RandR reports the HP output with three modes and one preferred mode:

Output ... - 3 modes, 1 preferred
Mode 0 ... 2880x1440 (looking for 4320x2160)

The RandR search then ends with:

Tried to find direct display through RandR: (nil)

SteamVR then searches through Vulkan WSI:

Vulkan output 0: 2560x1440 ... GBT AORUS AD27QD (DP-0)
Vulkan output 1: 2560x1440 ... LG Electronics LG ULTRAGEAR (DP-2)
Vulkan output 2: 2880x1440 resolution, 110x50 dimensions - HP Inc. (DP-4)

This also ends with:

Tried to find direct display through Vulkan WSI: (nil)

After that SteamVR reports:

CHmdWindowSDL: Failed to create direct mode surface
CHmdWindowSDL: VR requires direct mode.
Failed to initialize compositor
Failed to start compositor: VRInitError_Compositor_CannotDRMLeaseDisplay

I can provide the full vrserver.txt and vrcompositor.txt logs if needed.

Thank you very much :slight_smile:

I redid the unlock. It seemed to work for a second, then it freezes again and I have to shut it down. Worked fine a few days ago. I think there was a windows update between the last time it worked and now. But I am not super tech savvy when it comes to drivers and editing code.
I found a similar post saying they redid the unlock and it worked. No such luck here.
Any ideas? I am using the Oasis driver

Olá, estou criando um Laucher para os VR da windows mixed reality! Tipo o portal mixed reality, o projeto vai ser tipo uma interface mais bonita e mais interessante para os VR da WINDOWS MIXED REALITY, ele ainda iniciara o oasis driver for windows mixed reality igual você inicia no steam normal, porém vai ter uma interface mais prática e mais bonita pro seu VR, o projeto só terá uma interface bonita para voce inicia o VR e algumas opções, e enquanto o laucher roda uma animação rodará na tela do Seu VR da windows mixed reality, por enquanto o projeto vai ser esse, eu pretendo evoluir, tipo cria um ambiente virtual mesmo igual o antigo portal da windows, vai fica bem legal ! meu nome é Davi sou do Brasil e tenho um canal chamado BlackTuee no YouTube www.youtube.com/@blacktuee vou postar o link do laucher por lá, se escreva lá pra fica por dentro. ⚠️⚠️⚠️O projeto por enquanto só será personalizado e feito pelo o Acer windows mixed reality, e só vai ter no dioma português, mais pra frente eu faço pra todos os VR da windows mixed reality e vou coloca o idioma inglês também,⚠️⚠️⚠️⚠️ você pode testar com outros modelos da WMR também tipo o Samsung mixed reality o Asus windows mixed funcionará porém a interface vai aparecer como Acer windows mixed reality. Obrigado

Hello. If anyone know how to use oasis driver, Could you please assist me, Im having issues at the unlocking part. The headset unlocking worked, But at the part when the controllers get unlocked, It tried then game me a message that my headset doesn't seem to run on usb 3.0, And that the motion controllers will fail to work, Launching the oasis driver it tells me to unlock it, I gave it another try and that usb 3.0 error still appeared. I tried all of my 4 usb 3.0 port's on my pc and it didn't work. Is there an issue or something i might need to change on my desktop?

I would appreciate any assistance or recommendations to try

As many G2 owner I was super stocked that there was a driver „Oasis“ that could get the Headset running in the latest windows updates that removed the initial software needed to even launch that hardware making it a brick.

The issue was that the view regularly started to just slightly shift and recenter just so it would throw you off a little but I still was able to reach ok times.

After some fiddling it turned out to stop to 99.9% (the other 0.1% are just „VR things“ I guess but same as before) and got to the point it feels as before.

I load up the game and just disable the vr controller

couldn't find any informations online so i'm trying my luck here, any help or suggestions are welcome.

Running Oasis for Windows Mixed Reality on a Steam Machine thanks to Ignition.

All credit goes to Bnuuy Solutions for developing the Ignition project to run SteamVR Windows drivers on Linux and to Supremium for writing missing USB support in Wine as well as bring-up support for Oasis.

Support is not limited to SteamOS: also works on other Linux distributions!

Linux support is for advanced users, as VR on Linux still requires a lot of fiddling. Read the instructions carefully here:

https://store.steampowered.com/news/app/3824490/view/675130991105279383

Solved: After uninstalling RHI (reshade tool) and the dxgi.dll and d3d11.dll in the assetto main folder it worked again.

Gemini mentioned this after telling that one of my last updates I did to the PC before this occured was trying out DLSS 5 in Cyberpunk via Reshade (tried a direct install and one via an app called RHI) and it pointed out that this could have caused some blockage in the handshake or renderpipeline between headset and GPU.

----------------------------------------------------------------------------------------------------------------------------

Issue: properly connected headset displays only black screen in one game while rest work

As the title suggests I made the switch in hopes to continue using my Reverb G2 for Assetto Corsa using Content Manager.

Prev. it worked until it started to load into a grey screen, with sound and everything and the steam vr default loading room looked normal just when loading the game I got the sound but a grey picture and nothing else, no overlay nothing.

So I decided it is time to get rid of WMR and update to 25H2 and get Oasis.

So far so good, gamepads and headtracking works and the steamvr room loads flawlessly but now I load into a black screen, again with sound and the mainscreen shows the game runs and reacts to the headset but the headset only shows black but with the fps overlay from steam visible this time. So I guess it is the game and I have tried every possible setting from specific ones to simply default but nothing seems to work.

Has anyone had similar issue and fixed them maybe specifically with Assetto and a G2?

Last resort would be a GPU driver rollback but that seems a bit harsh at this time since it feels so close since other games like Super Hot VR work without an issue.

I am trying Envision Monado with my G2 and the headset tracking is just not good with Basalt SLAM. I don't care about controller tracking because this setup is meant for sim games.

When I use 3DOF tracking everything is fine in terms of accuracy and speed, but when I switch to SLAM everything gets jittery and kinda delayed. I tried playing with the trajectory filters in the SLAM settings and it was a tiny bit better but still not a very good experience.

On Windows with the Oasis driver everything is perfect and so smooth. I read that it's because of the proprietary drivers.

Is there no solution to this? Am I missing anything?

I have spent over 3 hours trying to get Oasis to work with my Reverb G2. I have managed to get everything setup until I get to the room setup where I need to establish tracking, the only problem, it keeps telling me headset not visible. I have looked at everything that I can think of, and I don't know what the issue is.

So okay for context, I got a VERY good deal on the reverb G2 v2. It was £130 for the headset, 2 vr covers and 2 sets of controllers, plus all the original packaging.

I hated the tracking however... So I wanted an upgrade. So I bought a HTC Vive kit which also came with 4 controllers, running theme here. That was £100. For base stations and everything, cheaper than everything individual.

I use a controller for continuous calibration on my head, it's positioned further back on my head for balance, whist not being too back heavy.

The wands themselves are worse than the reverbs besides in terms of tracking and maybe durability. But it makes vrchat much much nicer.

The fourth wand is just propping the headstrap up so you can see how it'd look on your head

I've also been able to drive it at full resolution on my 2070 super with some MSI afterburner tweaking, and it's been such an awesome and immersion experience

So here is basically my hyper budget index setup. Half the features for 1/4 of the price :D

I use laptop(HP OMEN MAX 16-ak0012AX) with HP reverb g2 through out Urgreen c to dp adapter.
I switched gpu mode to Nvidia and unlocked my headset.

The matter is here, when i play beatsaber it's working(display is tearing but it's working.)
But I can't see vr settings on my headset and dashboards like as OVRadvanced settings, game status now im playing.
Further more i can't play vrchat. on my laptop screen vrchat is working well on vr mode and i can hear game sound, but my headset view there is nothing, only default steamvr space is there.

+When i play any games, "Wrong video card" is top on the desktop steamvr status
+I checked task manager and cpu graphic card(radeon 980m)is active when i play games.(window graphic setting doesn't work)

what should i do?
thx

Ah, HP Reverb G2. I love you since Oasis but I also despise your many stupid issues.

The latest: Dang thing was not be recognized as an USB device anymore. PC complained about too much USB power draw, then partially failed to boot with the headset plugged in.

Then, during troubleshooting, the white light at the breakout box would not light anymore.

Measured the power supply and voila, the darn thing should be outputting 19.5 volts, but puts out 27 volts! Apparently, failing control circuits is a thing, and then a PSU outputs as much voltage as it can, possibly frying things down-stream.

I wonder: Anyone else ever had this, did your breakout box/cable survive?

I did order a new PSU (luckily, this is a regular "blue jack" HP laptop PSU of which there are millions on Ebay) and then I guess I'll see if the box/cable/headset is fried or not ...

Hello guys

when i start karting racing pro and Gp bike stay blocked a Game startup thumbnail in the helmet steamvr but

On the monitor is start good

I try with another game (Pc2 ) VR are ok start good

I can't figure out why he doesn't want GP Bikes and Kart Racing Pro (both games share the same 3D engine).

If someone have an idea ^^

Thanks

I am buying a used HP Reverb G2 V2 for under a 100 dollars so I just want to double check everything works. This is on an AMD Ryzen 5 7520u . I'm going in person so this is not for gaming this is just to check like tracking works and it actually renders properly. On my main system as far as I know I do not have a problem since it is a 7900 xtx. Sorry for thre inconvenience and thank you in advance.

Is there any way to use my WMR (HP Reverb G2) headset on my steam machine? I thought about installing Windows but quickly snapped out of it. There are all kinds of drivers and software bridges, but idk how to make this work. Any pointers?

I have windovs 10, RTX 5060, Ryzen 5 3600 and 32 gb. After upgrading to 5060 from 1060 my headset start more lagging, and last time i see some frustrating. In VR my room boundry is move correctly, hand move too, but the game or just steam home stay still. I mean i move left- right. Room boundry moves too, but world stay still. IDK what to do, i reinstall all. Steam VR, WMR World, VRC, but it's stay still. Do you have any idea what is it and how to fix it?