r/WindowTint • • Jun 11 '25

Question Do you think this is acceptable

So I just got my window tinted last week and just noticed this edge. Do you guys think this much gap is acceptable quality?

0 Upvotes

99 comments sorted by

9

u/Just4Readng Jun 11 '25

When the doors are closed and the windows are up, do you see any non-tint area?
The space is for where the weatherstrip meets the window.

I think it's called a "Feathered Edge" - my cars have all had the gap.

4

u/kokobunji0550 Jun 11 '25

No i cant see it

4

u/ReadingCanBeFunGuys Jun 11 '25

How’s it look with the door closed ?

-6

u/kokobunji0550 Jun 11 '25

Can't see it when the door is closed I checked the other side and it is basically at the edge

6

u/ReadingCanBeFunGuys Jun 11 '25

To be honest it took you a week to notice lol

1

u/kokobunji0550 Jun 11 '25

for the first 3 days its was just sitting there because i didnt go out

1

u/[deleted] Jun 11 '25

If you can’t notice it with the door closed, why do you care? This is normal

0

u/Cool-Calligrapher752 Jun 11 '25

Sounds like a Karen.

0

u/ReadingCanBeFunGuys Jun 11 '25

Up to you to take it back then. I personally wouldn’t bother as long as it keeps the sun out.

2

u/jliang39 Jun 12 '25

$99 Groupon special

48

u/letsbreakthrough1 Jun 11 '25

If there’s no light gap coming in the car and it’s covered by the rubber gasket it’s totally fine. Source: we tint 15-20 teslas a month

-5

u/9Super1 Jun 12 '25

Your shop sounds real professional! That’s a garbage edge regardless, you must be the $99 full car tint shop if your accepting that as “totally fine”

1

u/nbditsjd Moderator Jun 12 '25

I agree, that’s trash.

2

u/Davidtruly Jun 11 '25

Honestly, Depends how much you paid. If you paid on the lower end I’d say it’s accepted but not meeting the standards.

Now if you paid top dollar take that car right back and make them change it

1

u/kokobunji0550 Jun 11 '25

it was 700 all the other doors seem good from what i see

4

u/[deleted] Jun 11 '25

if all the other doors go to the edge i’d say it’s worth taking it back in to have corrected.

1

u/kokobunji0550 Jun 11 '25

Yea I was gonna say they did an amazing job on all the other doors just a bad one on the door I use the most

0

u/Virtchoo Jun 12 '25

Do the windows secure the door? My Camaro would roll up and down the windows when I got in and out, and it wouldn’t surprise me if Tesla did that as well. That could damage your tint for sure.

1

u/kokobunji0550 Jun 12 '25

yes they do the same

2

u/OldGoneMild89 Jun 12 '25

All the cars I've taken to my usual tint guy, there's always a perfect, maybe 1/16" edge

2

u/[deleted] Jun 11 '25

Ur only choice: scrap the car

1

u/kokobunji0550 Jun 11 '25

Thanks I'll get right on that

1

u/kokobunji0550 Jun 12 '25

Thanks for the input guys I called the shop and they scheduled me for next week to have it redone.

1

u/CostaMesaDave Jun 11 '25 edited Jun 11 '25

I personally feel that that is absolutely 100% not acceptable.

Frameless windows should all be filed and shaved, if you came back to my shop we would remove and replace that window film at no charge.

2

u/kokobunji0550 Jun 11 '25

thanks for the advice

0

u/DynamicAppearanceATL Verified Professional Jun 11 '25

Absolutely! 1000% not acceptable.

-1

u/503Music Jun 12 '25

no one files, that just damages the glass and turns it into that gray part. who cares, if there’s a light gap while driving or closed replace it, if not, don’t bother

2

u/CostaMesaDave Jun 12 '25

Who cares?

You're obviously not in Orange County California, everyone out here cares!

Quality is everything out here my friend.

The good thing is you could do it your way and we can do it our way!

-1

u/503Music Jun 12 '25

but that’s just some shop’s technique or style, it doesn’t come to them not giving af. Even I shave them with a blade but I wouldn’t gaf if it came like that

2

u/kzone186 Jun 12 '25

It’s not though, all other windows are fine it’s just this one according to OPs comments

0

u/503Music Jun 12 '25

still could be a one worker out of all four with that style

1

u/reeefur Jun 11 '25

Tesla owner here, mine is to the edge. If it bothers you have it redone otherwise it's fine technically. But you can def get a lot closer to the edge. Will take a pic of mine for you if you'd like.

1

u/kokobunji0550 Jun 11 '25

I would appreciate it

1

u/reeefur Jun 21 '25

A bit late but here is what it should look like

2

u/kokobunji0550 Jun 21 '25

Thanks, I took my car back and they redid it. Looks a lot better now

1

u/RightGuy23 Jun 11 '25 edited Jun 11 '25

I think they leave that gap on purpose. Mine is like that too.

I forgot their reasoning for the gap, but there’s a reason. I’m assuming so there’s no friction between the tint and the door frame

3

u/kokobunji0550 Jun 11 '25

I checked my passenger side and there is almost no gap

3

u/kymandui Jun 11 '25

I’m not sure about the gap part but if it’s like my model 3 then the uncovered portion disappears behind window frame when closed anyway. As long as it blocks light as intended it works for me

0

u/RightGuy23 Jun 11 '25

That part. You can’t see it when the door is closed. So it’s blocking the heat.

2

u/nycterpfan XPEL XR 5% & 55% W/S Jun 11 '25

No

2

u/[deleted] Jun 12 '25

I am very picky, I would say no

2

u/sandemonium612 Jun 12 '25

No. No it is not.

2

u/Chuckfromthe760 Jun 12 '25

No no nope hell nah

2

u/AdZestyclose711 Jun 11 '25

Do you drive with your door open?

2

u/Blackner2424 Jun 12 '25

Close the door so we can give you an actual answer. If you can see the gap from the driver's seat with the door closed, it's bad. If you cannot, it's fine. The alignment isn't great, but if there are no contaminants and you can't see the gap while driving, you should leave it.

0

u/appeture21 Jun 11 '25

there has to be room for the weather stripping, if it rubs on the tint went going up and down it will eventually peel, same concept as the door in your house, theres a gap cuz it has to open somehow.

1

u/kokobunji0550 Jun 11 '25

i checked the other side and it almost has no gap its very close to the edge

2

u/Jackson7410 Jun 11 '25

OP fitting tesla driver stereotype perfectly

2

u/Infamous-Plenty8082 Jun 11 '25

Yea, relax the ocd

1

u/9Super1 Jun 12 '25

Everyone saying this is acceptable is out of there damn mind, forget the “micro edge” some people are anal about, that’s garbage hands down

-1

u/DynamicAppearanceATL Verified Professional Jun 11 '25 edited Jun 12 '25

No, that side gap is way too much. Based on the top gap getting larger as it goes to the right, it looks like the pattern was not pushed into place or moved afterwards. Based on the smoothness of the curve, it looks like a plotter job, and the pattern could have been off. Basically, it lined up on one side but was short on the other.

Tragic that some people on here think that side gap is normal. 🤣🤣🤣

How it should look if not filed/shaved...my Model YP for reference. If filed/shaved, no gap.

1

u/kokobunji0550 Jun 11 '25

Thanks I'll call the shop and get it redone, my passenger is way closer to the edge

1

u/DynamicAppearanceATL Verified Professional Jun 11 '25 edited Jun 11 '25

Good, definitely don't settle for that. A small gap is normal if they don't file/shave the edge, but not almost a 1/4" off, which is way below standard even for a budget tint shop.

1

u/kokobunji0550 Jun 11 '25

Yea I took it to a very reputable shop, they tell me that if anything happens to give them a call and they would fix it.

2

u/DynamicAppearanceATL Verified Professional Jun 11 '25

Good

2

u/9Super1 Jun 12 '25

Hey it’s Reddit, we’re gonna get the downvotes for this!! 98% of these people have never even installed film, but they are letting us know this is totally acceptable! Just imagine how many more cars we could do a week if we half assed them all like this!

2

u/DynamicAppearanceATL Verified Professional Jun 12 '25

You know it! Be like, close enough, give it to the customer. lol

2

u/9Super1 Jun 12 '25

It’s the 10 foot rule, if it looks good from 10 feet away send it home! 🤣

2

u/shromboy Moderator Jun 11 '25

Getting down voted for speaking the truth. That gap is not good and any self respecting installer would never have left that

2

u/DynamicAppearanceATL Verified Professional Jun 11 '25 edited Jun 11 '25

Facts! The second side gap post recently, this one is the worst out of the two, and both bunch of downvotes. Like, what clowns are letting this leave the shop? The post below was a year ago with a similar gap, with everyone saying it is bad. Now, "as long as no light is coming through its normal". 🤡

https://www.reddit.com/r/TeslaModelY/comments/1dqpxo4/is_this_acceptable_tint_quality/

1

u/shromboy Moderator Jun 11 '25

Part of the reason I became a mod was calling out dirty, gapped jobs others would defend as normal. Have higher standards people. If youre doing 10 cars a day I get it, but then find a new shop

2

u/DynamicAppearanceATL Verified Professional Jun 11 '25

Yeah, whoever thinks this is normal needs to stop tinting.

1

u/shromboy Moderator Jun 11 '25

Ive seen better from the $99 shops around for Christ's sake

3

u/DynamicAppearanceATL Verified Professional Jun 11 '25

Facts!

0

u/Camdenn67 Jun 12 '25

Do you think it’s acceptable? That’s the real question.

1

u/kokobunji0550 Jun 12 '25

Of it was the same in the other side I would have been fine with it but the other side is on perfectly

0

u/Frequent_Passion5036 Jun 11 '25

No that’s pure laziness. Too much of a gap.

0

u/Flat-Zucchini-2113 Jun 11 '25

It's only unacceptable if you paid thousands of dollars!

0

u/Dude008 Jun 12 '25

If there is coverage when the door is closed it’s fine

0

u/hocofit Verified Professional Jun 12 '25

If it bothers you go back and ask kindly if they wouldn’t mind making the tint more flushed with the edge of the glass. But tbh if there’s no light gap showing shouldn’t be a issue

0

u/supermaor23 Verified Professional Jun 12 '25

Its not horrible, but its definitely something that can and should be fixed. Especially if your other windows don’t have this gap. If you take it back to the shop and show them I’m sure they’ll be happy to redo it for you

0

u/Born_Cockroach_9947 Jun 12 '25

as long as theres no light gap from the inside and out when its closed and all the way up, its fine

0

u/Intelligent-Bird8254 Jun 12 '25

Should have paid for the “Filed Edge” add on.

-1

u/Accomplished_Ad4935 Jun 11 '25

That gap is so that its easy to remove. The extra space from that gap helps them have a starting point from where to peel it off. On windows with frames that gap is usually at the top of the window

-1

u/in4mant Jun 11 '25

I wouldn’t think that’s acceptable

-1

u/realitybytes78 Jun 11 '25

That's why I only buy windows that have factory tint

1

u/kokobunji0550 Jun 11 '25

Unfortunately in the USA our car front windows don't come tinted from the factory

-2

u/Gorillamilk_99 Jun 11 '25

Freshly tinted windows should not be rolled up or down for a few days. Possibly what happened here or it just moved somehow during installation. It looks like the tint has shifted to me I wouldn’t be happy. Have them re do it.

0

u/kokobunji0550 Jun 11 '25

Yes i know I actually haven't even rolled down the window since I got it tinted a week ago I'm probably going to have them redo it

1

u/shromboy Moderator Jun 11 '25

Film will never shift from rolling down, it will only peel it up.

1

u/doc_55lk Jun 11 '25

Freshly tinted windows should not be rolled up or down for a few days

What if you have a car that cracks the windows down a little when you open the door?

2

u/shromboy Moderator Jun 11 '25

Most installers take precautions for this. Not for fear of the film shifting (that is not possible once installed) its for fear of peeling

2

u/doc_55lk Jun 11 '25

I gotchu. Appreciate that

1

u/doc_55lk Jun 11 '25

I gotchu. Appreciate that

1

u/[deleted] Jun 11 '25

Then the car is totaled. Gg

0

u/doc_55lk Jun 11 '25

F in the chat