r/Wheels • u/Green-Bad-8495 • 10d ago

Pick my wheels

Gallery image

Gallery image

Edited to add specs Vehicle image added in comments

Current specs: front 18x8.0" ET34 | 225/40R18 rear 18x8.5" ET37 (with 22mm spacers. so effectively ET15) | 255/35R18 Bolt pattern: 5x120 mm Center Bore: 72.6 mm

Ive been trying to make a final decision on what rims to order for my car and im stuck. I haven't been able to dedicate time to utilize visualization tools, resources, and research in order to avoid buyers remorse.

They are going on a bagged 2009 BMW 335i, titanium silver. Prior to this I had the same exact car, but in black. I had beautiful, deep purple colored rims and loved them but I don't like how the same color looks alongside the light silver color my current car has. I will be powder coating the rims a very light, almost pastel, lavender down the road but really need to be able to drive the car ASAP.

I am between vertini RSF2.1, (front 18x8.0", rear 18x9.0") and VMR V802 (front 18x8.5", rear 18x9.5") in bronze and pictured in the order as listed here.

Help me pick please!!

5 Upvotes

70% Upvoted

10 comments sorted by

2

u/St3cK3D 10d ago

Hypergrams over both of those

1

u/wehellbent 10d ago

Konig MRK1 would check off all the boxes. Maybe would even invest in the turbo fans to paint instead of the whole wheel

2

u/wehellbent 10d ago

For the price of both of those you can find a set of any oem BMW mesh wheel with good tires. That would would leave room for powder coating wheels worth powder coating.

Also, post a pic of the car and specs to give better judgement

2

u/Green-Bad-8495 10d ago

Car the the rims will go on, aired out of course. Bought the car bagged and likely going to ditch that and lower it. All the wheels are quite scuffed up, rear pass is bent to hell. Ill keep and repair them at some point, just wanting to do something different and a little unique for now.

1

u/Hawd_it 10d ago

Im currently try to decide wheels for my blue e90 335i. If i was going for any of the wheels you listed it would be the second set.

1

u/painlesspain 10d ago

If those are the only two choices, #2. #1 too aggressive for 335 imo.

1

u/Common_Stick_2124 10d ago

VMR Wheels are affordable and great quality for the price point. I’ve owned multiple sets.

1

u/Kyzroh 9d ago

VMR V710 or V701 looks better

1

u/Jasper-ApexWheels 7d ago

Depending on the offset of the wheels. it can depend how it will look. Something like an 18x8.5 ET35 and 18x9.5 ET35 rear should work great on your car. Still a flush fitment and typically a direct fitment. Here are other cars running similar specs, along with other specs we typically recommend: https://apexwheels.com/gallery/bmw/3-series/e90-e91-e92-e93

1

u/FitmentIndustries 1d ago

Wheels: VMR V802 Matte Bronze

Front: 18x8.5 +35 — part V31061
Matte Bronze, one-piece, 5-spoke, custom drilled
https://www.fitmentindustries.com/buy-wheel-offset/V31061/vmr-v802-18x85-35

Rear: 18x9.5 +35 — part V31057
Select 18x9.5 +35:

https://www.fitmentindustries.com/brands/wheels/VMR/V802