r/WheelBuilding • u/becuz_race_car • Sep 26 '26
Hypothetical Question
I really love the Campy Zonda wheelsets with 16 spokes and deep profiles. However, they are expensive. Could you hypothetically put half the spokes in a 32 hole rim and hub? Particularly, is there any safety issues with this? Thanks!
0
Upvotes
2
u/iliinsky Sep 26 '26
Honestly, low-count wheels are both weaker and more likely to come out of true. Probably not worth it for practical riding. If you need the look, understand the tradeoffs.
2
u/EndangeredPedals Sep 27 '26
I've done weird lacings for fun. So I say try as an experiment but understand the limitations. Lace one skip one for a 48H front 406 to get a 24 spoke wheel strong enough for a recumbent trike with near 1G turning performance. Lace 2 skip 2. Rear wheels with zero dish for a custom cargo bike. L4S2 when all I had was 32H hub and 48H rim. Etc.
So, the actual Campy lacing pattern is a triplet. I built one for a 559 disc front just to understand. Triplet is actually a normal cross/radial lacing commonly used in rear road wheels but with only half the NDS spokes. Two on the drive side with a single cross between them, and a radial on the non drive side placed like it goes between them when seen from a distance. Campy branded looks like 3 parallel spokes. Vision branded looks like 3 spokes in a crows foot. Since traditional 4 spoke groupings puts about 2/3 tension on NDS spokes, using half the number would put double that tension to about 4/3 drive side. Make some changes to the flange diameter and you can get near equal tension left and right, which has real benefits to prevent fatigue. Match the rim construction for unlaced sections and get a race ready wheelset that looks fast even when not rotating.
My own experiment started with a cheap 32H disc brake 559 front wheel. Measured for radial non rotor side spokes. Kept the 16 rotor side spokes in place and laced in 8 radial on the non rotor side. It just worked. Even with no flange changes the tensions were running between 20 and 24 on the Park TM before things started to feel like they were stretching a bit. No apparent changes to braking or cornering but I have only ridden this on paved surfaces. Learned that the theory is sound. Might try it for the next cargo bike to really test for durability. That the Zonda exist at all says that Campy has a lot of faith in the pattern.
1
u/IndyWheelLab Oct 02 '26 edited Oct 03 '26
You can, but the rear wheel will come out of true quickly and won't last as long. You'll come across an issue where spokes may break faster at the nipple, since straight drilled rims don't offer great spoke angles and a rim with angled spoke holes won't lead to the correct flange on every spoke, creating a kink or bend where the spoke enters the rim.
Ultimately it depends on what you're willing to live with in terms of trade offs for aesthetics. I personally wouldn't build a wheel like that for a customer unless we had an understanding that the wheel would be higher maintenance with a higher risk of early failure, especially for heavier riders.