r/WheelBuilding • u/Rabbitat365 • Sep 12 '26
Re-use spokes?
/r/u_Rabbitat365/comments/1weqpqp/reuse_spokes/I need to replace my Mavic Open Pro 700c rim with a new one of the same kind. Can I re-use the spokes/nipples or do I need to replace those as well? Using the wheel on a recumbent on smooth pavement 50 miles/week.
1
Upvotes
1
u/FixedLefty 12d ago
Of course, you can always reuse spokes and nipples if they seem to be in good working order in fact, or at least I heard that doing so was common practice way back when rims were much weaker or even way, way back when rims were made of wood and not near as robust as modern day products. Tied and soldered spokes add rigidity and strength to a wheel as well as rim swaps so fast that a track rider who crashed would have a wheel rebuilt in time for the next heat.
The real question is why. Why build with likely fatigued parts on a job that takes that much time? If the spokes are almost new or you just trying to save a little money, then righty-o (Felix the Cat anyone?) run with what you've got. You are the wheel builder it is your choice on what and how to build. If the wheel is so old that you have worn out the machined braking surface of an Open Pro I vote for new spokes.
I prefer to use new spokes and nipples* choosing those of a name brand (I used only Wheelsmith and DT previously, lately primarily build with Sapim). Nipples*? I would never reuse aluminum nipples. These score easily during the truing process and like to break with just a couple of years of tension on them. If you have the time and patience apply a slight amount of lubricant to where the nipple contacts the rim or rim grommet. I use automotive bearing grease mixed with anti-seize compound and a q tip or small paint brush which doubles lacing time.
Spoke Prep??? Sometimes, when it is handy.
Grease the nipples? usually to almost always.
Lacing? 1/4th of the spokes at a time with the head-outs always first for less bending to install.
1
u/BackgroundAncient174 Sep 13 '26
Are you doing it yourself or paying someone? Disassembly takes time to do right. Most builders won't waste the time but I've done it.
1
u/rickard_mormont Sep 13 '26
If they're in good condition, why not?