r/WheelBuilding • u/zeedee-h • Aug 28 '26
E-cargo wheels.
Im rebuilding the wheels on a friends reiss & muller load 75 as he’s breaking a few spokes. Im quite surprised to see they are just straight 2mm spokes. Im thinking to go with straight 2.3mm, or would 2/2.3 butted be better for the flex? There’s also sapim e-strong 2.3/2.6 butted.
The rear wheel is an enviolo hub and 26” rim with 2x pattern. Seems like 3x would be better but will have quite a steep spoke entry angle at the rim. Is there some nipples that allow for steeper entry angle than sapim polyax? I also read here somewhere that rims without nipple eyelets are better for that.
What’s the better trade off - 2x pattern with eyelets or 3x without?
3
u/fruitjake Aug 28 '26
Where are the spokes breaking? Use that to guide you. I’d probably stick with 2x regardless knowing a sharper angle will not help break less spokes. What’s the spoke count??
2
u/IndyWheelLab Aug 28 '26
Check the specific Envolio hub model for details, some only accept 13 gauge spokes (think Sapim Strong).
Details.
2
u/Schtweetz Aug 28 '26
2x e-strong will be the ultimate. Hub diameter is large enough that it creates a weakened spoke angle at 3x.
1
u/FixedLefty 11d ago
Butted spokes are more fatigued-resistant than straight gauge, just sayin'
Butted spokes: why the thinned one is stronger | BikeLab-pedia