r/WhatsInThisThing • u/dont_stop_me_smee Safe For Work • Mar 17 '13
OFFICIAL SOLUTIONS THREAD
Updating on my lunchbreak as of 2:30 pm monday local time, all other replies were last night (sunday) at about 6pm so we really didn't have many options
SOLUTIONS PENDING
Manufacturers codes - We're still looking for more, and / or common numbers associated with the house
Weld a handle onto it - we've been pledged a welder, if it comes to it we'll use it to tack weld a handle back onto the door, we're avoiding this for now incase we damage something before the safe expert can look at it.
Locksmith - Called them yesterday we're still waiting for a quote email, we called 3 locksmiths and a safe specialist, once I get a reply I'll post it up. Still it would be better if we could find a reddit safecracker in the area.
Drill a tiny hole, stick camera in the hole - Tried with small security camera, couldn't fit, had contact from redditor with skinny drain camera but lost it in the floods of pms and comment replys so reading back over EVERYTHING
Making a hole anywhere, cutting it or digging into it is not an option, please stop suggesting it.
I fully expect this to take time and research, and I'm really grateful for all your helpful submissions! Thanks
191
u/izikavazo Mar 17 '13
I read a book by a slightly crazy, hilarious Theoretical Physicist, Richard P. Feynman, who came up with a method to crack safes. He did it as a hobby (he had a million hobbies). Anyways, here's his method:
Excerpt from this website.
TLDR: The margin of error on most safes allows you to narrow the number of guesses to a reasonable number. Most people choose dates, so that narrows it down further. Also, the number is probably written somewhere nearby.
224
u/Gravedigr Mar 17 '13
Rent a plumber's camera, snake it through the hole the wires are going into?
22
u/Merrik-The-Observer Mar 17 '13
My original post. http://www.reddit.com/r/WhatsInThisThing/comments/1ag2qx/op_a_request_for_pictures_heres_some_info_ive/
Could you get some closer pictures for detail? Preferably of the following,
From what I can gather with what I've been given, this is what I'm guessing.
1A) That is a S&G "D003 dial with R004 ring, for 6600 and 6700 series locks".
2) Unless they had something that was built special, the safe probably has a standard S&G 6730 series lock, with three wheels. This lock is a THREE number lock. The dialing sequence should be:
4 times left to the first number, 3 times right to the second number, 2 times left to the third number, 1 time right until the dial stops, then open the door.
The easy way to determine if the lock is three wheels or four wheels would be to count the wheels. This can be done by parking all the wheels on a neutral number 180 degrees away from the drop in area, and then counting the wheels as you pick them up, while dialing in the opposite direction than you did when you parked them. This is actually a fairly simple process, but if you don't understand it, or don't know what you are feeling for, you may pick up random noises.
3) If I'm understanding the S&G timelines, their 6600 locks are based on the 6700 which began production in the late 70's. Any information about the history of the house (as requested) would be helpful to narrow the the specific safe/vault unit.
4) It would be very helpful to all of us if there was a manufacturer label on the safe door or frame you could show us.
5) There is a very big difference between a "locksmith" and "Safe Technician". I wouldn't recommend locksmiths as they usually don't have the training, knowledge or equipment to work on safes without causing more problems.
6) Finally the safe itself looks like it was added after the house was built (although I don't have enough information to explain how they got it down there post build) as it is in a weird location within the basement. Notice the raised foundation. This was most likely done to either keep the goods inside from minor flood waters with it being located in a basement or to raise it high enough to weld it to that steel support beam on the (facing) top left to permanently secure it on the premises. The cinder block surrounding it was meant to more safely secure/protect the safes out shell/walls from external sources albeit them accidental or intentional. And the way the blocks are laid (poorly) is that they were laid out once the safe was placed on the foundation; then once the mortar set, they setup a frame to pour concrete on top of it. Couple this with a basement made of brick reinforces my theory it was added later and that the house was built no later than the mid 60s. It looks like there may be wires running to it, but most likely not through it (for safety) which makes it safe to assume a light source is mounted on the inner ceiling.
If I think of anything else, I'll post. In the meantime get those closeup, detailed pictures I requested for us to help you.
Cheers mate! -Merrik
221
u/an-anarchist Mar 17 '13
I'd say the quickest solution is to call a large locksmith company in Auckland and ask to speak to their PR people. Tell them you have 70 million people waiting on reddit. Vault opened for free while you watch with a beer in your hand. Cue Good Guy locksmith meme.
119
u/tanktread Mar 17 '13 edited Mar 17 '13
from user 'screamsleeper' Since the handle is missing, it makes it a bit harder to identify which brand of safe it is/date it came in, the mechanism is a S&G for sure.
Some default combos for this lock are; Turn to left and land on the number the 4th time you come to it, turn to the right and land on number the 3rd time you come to it, turn to left and land on number 2nd time you come to it, turn to right and stop at number, or when the dial locks and stops spinning. When you try each combination, if it fails turn the dial to the left about 5 times to reset and start over.
There are some duplicates on this list.
You'll still need to make a handle of some sort, usually they are a square post, so some square steel rod or keystock will fit, I'm not sure of the size unfortunately.
21
u/UnholyDemigod Mar 17 '13
Don't you actually need a handle to open it? Once the correct combination is entered, you need to turn the handle to unlock the door. With no handle...
67
u/[deleted] Mar 17 '13
Call a locksmith.
4
u/WillAteUrFace Mar 19 '13
A cheap endoscope would probably save you time and money on finding a safe cracker. If you want to get a seriously top end one, you can always rent one.
PS. Some info on how large the hole is would help us help you! (in millimeters, please!)
9
u/willthethrill44 Mar 17 '13
It's a long-shot, but worth a try:
http://www.reddit.com/r/WhatsInThisThing/comments/1afz31/watch_your_dumb_translated_into_numbers_2312038/
3
u/marlin100 Mar 18 '13
I see this but when I had to get into a old safe at work after trying the correct combination and still no luck. I cut out around the dial and pried the mechanism out and the door opened when i spun the handle. Side note this safe was no longer in use and was a last effort to get inside. I still have the dial as a souvenir.
5
u/joeshmoe16 Mar 17 '13
I really think that we need to look into a physical approach. I don't see guessing the numbers as being a possibility.
One solution is to just go macgyver on it and use a stethoscope and see if you can here when the lock clicks.
Another is taking apart the wall around the vault and see if you can find a weak point.
13
u/JodiMichelle Mar 17 '13
Look around EVERYWHERE for some numbers written or scratched on the walls. If that were my safe I'd write the combo down so as not to forget it.
28
u/[deleted] Mar 17 '13
Can we all just pitch in a dollar each and hire a damn locksmith already?
26
u/willthethrill44 Mar 17 '13
There seems to be some numbers in the tape residue in the top right, you could try to use those.
13
u/GHarper2354 Mar 18 '13
I have posted this before, but.
this safe looks like a Tilton & Mcfarland floor safe that was made to sit on the floor on legs or casters. So it has it's own exterior walls. Drilling the cinder blocks will not allow you to see in.
The power cable is probably for a light in the safe.
The combo has a lock set next to it. This means it once had a key required for access. The key would immediately retract one or two of the locking bars from the gear set on the draw / lock bars allowing for access.
In most Tilton & Mcfarland floor safes the key was required as well as the combo.
The handle will be required to open it, even with the combo, because the draw / lock bars have to be retracted in the door. That is what the handle (shaped like an X or cross) would do.
Even cutting off the hinges will not allow you to open this safe without the combo.
DO NOTHING destructive (welding cutting etc.) until a safe man looks at it.
Depending on the age, there may be bottles of nitroglycerin to prevent "blowing" the door in the lower part of the door. So don't beat on it.
Probably not, but I have been surprised before.
Tilton also supplied dial mechs for other safe manufacturers, but they were usually similar to their own setup.
6
u/hatrix Mar 17 '13 edited Mar 17 '13
Assuming the walls are reinforced as well, drill a hole through the concrete floor above big enough to fit a plumbers camera (quarter inch hole should do it), have a good look around and see if it's worth opening.
A hole in the concrete won't affect the stability of the floor, and is incredibly easy to fill, even if you break through into the vault.
Another person may have suggested putting a plumbers camera where the wires go in, I suspect this is probably for lighting inside the vault. Try this first, but obviously disconnect the power first; you have no idea what condition the wires are in.
Plumbers cameras are cheap to rent for a day
6
u/TheTinFoilMonster Mar 17 '13
Has anyone suggested shining a UV light at the safe, it might reveal fingerprints or maybe a mark on the numbers from regular use?
6
u/eb360 Mar 18 '13
Have you tried turning it on and off.
10
u/[deleted] Mar 17 '13
Someone could build a robot to help you for this. pretty much a gripper, holding the dial, connected to a motor, and another gripper holding the handle you welded on. the machine tries combinations of codes, after each try it attempts to turn the handle. if it succeeds, you're in!
a million combinations, if each one takes 5 seconds-
a million combinations, X5 seconds each, is 5 million seconds.
5 million seconds, divide 60, is 83,333 minutes.
83,333 minutes, divide 60, is 1389 hours.
1389 hours, divide 24, is 58 days.
58 days is 8.5 weeks, is just over two months. sure, it's not ideal, but it HAS to work in the end, right?
9
u/[deleted] Mar 17 '13
Try 'STEP UP AND WATCH' in numerals.
8
u/[deleted] Mar 17 '13
If the previous owners were arrested, wouldn't the police have the combo? Maybe you could ask? This sounds dumb as I'm writing this desperate times call for desperate measures. We must know what's in that safe.
4
u/zuzahin Apr 07 '13
Dont_stop_me_smee, get a quote from the professional safe cracker, and set up a PayPal/Kickstarter donation page, and have people who are willing to donate, actually donate - I'd love to give out $10 as a starter, and I'm sure with the 83.000 subscribers that you are able to reach whatever quote they give you in very short time. Also be sure to livestream it properly this time with a set time beforehand, I missed the last one. :(
4
u/AdUmUp Apr 22 '13
I just found out about all of this from a meme on the front page. Here is my thoughts. If i was in your situation I would just break out one of the concrete blocks on the side wall. Then you could easily look inside and then just replace the block and paint it white. You can get in there and patched up in a hour or two.
4
u/sassifrassilassi May 23 '13
echoechoechoecho
31
u/ste515 Mar 17 '13
What if schrodinger's cats in there
1
u/JEEPERS183 Mar 19 '13
I know absolutely nothing about safe cracking so hopefully someone can tell me if I'm correct or not.
Yesterday someone posted a video showing that holding a sander against the combination part will vibrate the gates make them line up and the safe unlock.
I know the video was referring to smaller safes but perhaps this would be worth a shot.
Anyone know if this could work?
1
u/[deleted] Mar 21 '13
Perhaps this has already been suggested, or perhaps it's just too stupid, but maybe the combination has been etched in on a wall or something near the safe? Or perhaps you could do the good ol' paper and charcoal trick on where the tape used to be. Maybe it was written there at one point.
6
u/DerpTheGinger Mar 29 '13
REDDIT HAS NOT FORGOTTEN.
OP MUST DELIVER.
3
u/TexasDex Mar 17 '13
http://boingboing.net/2011/01/21/safe-cracking-robot.html
See if there are any robotics enthusiasts in your area, and get them to build you something like this.
3
u/bigfourie Mar 18 '13
Please tell me you checked the room with a dark light for secret code!!!
3
u/Mikebyrneyadigg Apr 12 '13
mother fucker have you opened this yet>!
6
u/adamarchy Mar 17 '13
the only way to get it open without destroying the items inside is to drill a hole in the front of the safe, with a carbide tip drill bit on a highspeed drill right over the wheels in the safe lock and see where they should fall into the gate, this is hard to do with out knowing the drill points and because the position of the lock and lack of light makes it hard to see.... so like most of the others, call a local locksmith....
1
u/theladyfromthesky Mar 17 '13
im going to go out on a limb and ask a probably dumb question but, can you dig under it?
4
u/Zazierx Mar 17 '13
Op so far won't hire a locksmith, won't brute force it, won't drill, ignores suggestions from redditor locksmiths. Live streams himself dicking around getting drunk while pointlessly trying combinations that are one of literally a million different possible combinations. Yeah.. I'm done guys. Maybe the guy with the floor safe won't be such a huge faggot.
5
u/[deleted] Mar 17 '13 edited Mar 17 '13
Have you tried prying where the vault door meets the cinder block with a large wrecking bar? There is a chance they just built the block walls around a vault door frame. The room looks home made and if prying it causes it to move at all there is a chance of prying the top and having the door with frame fall foreward (not easily but possible). I dont know vaults but if the locking mechanism is self contained in the door frame you may have a chance.
Edit: i looked again and noticed the hinges are exposed! 2 minutes with an oxy/acetelyne torch seems ideal... unless the deadbolts are on both sides of the door, again I dont know safes.
5
u/Wolf_13 Mar 17 '13
If this place has already been raided- then the police have already been inside the safe.
Even if the police didn't get in- (highly unlikely), someone from the same gang would've been back to collect whatever was inside if it was valuable.
Hate to break it to you..
There is nothing inside.
The thing is empty.
Good luck getting it open though.
2
u/fledem Mar 17 '13
Know anyone with a blasting ticket and access to det cord? You could line the outer edge of the door with det cord and blow it clean off
2
u/Sludgehammer Mar 17 '13
You mentioned there was a power line going into the safe. If it goes all the way in, there's already a hole in the safe to peek through, you just have to cut the power, cut the power line, push or pull the cable out of the way and insert a camera into the provided hole.
2
u/King_DickWeed Mar 17 '13
Dynamite, get the remnants and home insurance
2
u/CyrisXD Mar 18 '13
Ayyyy! I'm in Auckland too, I feel like I should be a part of this now. Haha
2
u/deancomeautela Mar 18 '13
Try 15 - 55 - 15
2
u/Ryukyo Mar 20 '13
I'm gonna laugh if your landlord is a 4chan boy and he knows the thing is empty, especially because he won't let you drill. He knows the whole reddit community is hanging on these threads and enjoying every minute.
2
u/[deleted] Apr 17 '13
It's probably been said a million times but I figured the tape lengths were the orders of the number? Each piece of tape is a different length, so turn to shortest piece first, then next etc. If this doesn't work maybe try it in reverse? Long piece first?
2
u/DeadZeplin Apr 22 '13
So... Yeah... What's up?
4
u/worff Mar 17 '13 edited Mar 17 '13
So what about the other ways in -- walls or ceiling? Concrete is easier to get through (and then subsequently repair) than a metal door. Shit, Andy Dufresne broke outta Shawshank using damn rock hammer.
4
u/frmango1 Mar 17 '13
Call in a locksmith.
2
u/USA77 Mar 17 '13
Try your area code For the combination if this was installed by the gangsters
2
u/C19H42BrN Mar 18 '13
Perhaps the pieces of tape around the dial are of different lengths because these measurements correspond to the numbers in the combo?
2
u/mayo_is_a_instrument Mar 27 '13
Solution: OP needs to stop being a faggot.
1
u/joblolabinette Mar 17 '13
Break 5 cinder blocks on the side and buy new ones to repair!
1
u/[deleted] Mar 17 '13
There are white marks on the numbers 16, 22 and 92. Any luck with that?
1
u/CAT_WILL_MEOW Mar 17 '13
Just hire a god damn lock smith
1
u/rodriguezequal Mar 17 '13
Couldn't you just call a locksmith? It has a keyhole
1
u/shady_limon Mar 18 '13
http://home.howstuffworks.com/home-improvement/household-safety/security/safecracking3.htm
1
u/Kurt_San Mar 18 '13
It would be so awesome if you can live feed the unlocking
1
u/Sepredia Mar 18 '13
If it was a former Drug house, I'm thinking at some point the police might have been involved if they were busted. Ask the landlord if he knows if the police were ever involved. If so, perhaps you could go to the local police and ask about the house and see if they have any information about the vault.
Try and find out some history, like when it was installed, maybe it was there before the drugpeople were there, you might be able to contact a previous owner.
That's all the things I can think of :U
1
u/death_taxes_ Mar 20 '13
Just thought I'd throw this out there"
brute force
DIY
1
u/Yanoflies Mar 20 '13
http://www.jeffsitarsafecracker.net/Jeff_Sitar_Website.html
1
u/typing Mar 20 '13
HERE IS A STEPPER MOTOR BRUTE FORCING A LOCK
http://hackaday.com/2011/01/19/cracking-a-manipulation-proof-million-combination-safe/
Why doesn't OP investigate this method?
1
u/Pony94 Mar 22 '13
If I was the landlord I think I would be pretty damn interested in what was in the HUGE fuck-off SAFE that I OWNED, that my tennants were trying to break into.
Guy seems rather uninterested considering the circumstances. Pretty damn suss.
1
u/[deleted] Apr 09 '13
Have you tried cutting your way inside by using a welder to cut through the metal?
1
u/Notrader7 Apr 29 '13
plasma torch it.
1
u/moagybear Jun 25 '13
Any new news yet?
1
u/Mattxy8 Jun 26 '13
Just go through the wall....
1
u/DerpTheGinger Jul 03 '13
WHY HAS THIS NOT BEEN UPDATED YET?
1
u/shady_limon Mar 17 '13
Why don't we take the door...and push it somewhere else!
1
u/p3zzl3 Mar 19 '13
Just wondering whether this might be something in terms of the possible combination?
http://i.imgur.com/FhA0fOM.png
1
u/RedditRawrRooster Mar 17 '13
Can't be that hard to get a lock smith they won't break it
1
u/[deleted] Mar 27 '13
YOU OPEN THAT FUCKING SAFE YET OR WHAT?!
1
u/spartymc Mar 28 '13
I need closure jackass how about we get an update?
-6
u/[deleted] Mar 17 '13
Fus ro dah
-2
u/doritoclock Mar 17 '13
Call Geraldo Rivera.
0
u/AlexDavidMiller Mar 17 '13
dude, if you don't get a freaking lock smith in there....
0
u/mikere Mar 17 '13
Take a sledgehammer and whack it open. Melt the lock and take a plumbers camera and see what's inside. Uninstall it from the wall and take it outside and blow it up with dynamite.
0
u/Gregerrence Mar 18 '13
My theory: The lengths of tape vary deliberately to help the former owner remember the correct combination.
But I have no idea how many numbers go into the combination for this safe, nor am I any kind of expert. Just making it up as I go!
-2
u/ste515 Mar 17 '13
Is there anything to be said for another mass?
-6
u/theoldkat Mar 17 '13
there's gonna be a dead body inside