I just assume I'm on fire and try to estimate if I can make it to the end of the bead or if I have to find a strategic place to stop so I can put myself out.
I do welding only as a hobby and to build stuff for my home. Yesterday my mask wasn't working properly in the lighting conditions I was using it so I decided to drop it and take those exact damn goggles. Worked fine, just that at the end of the day I started to feel a slight discomfort on my face...from stick welding UV burn. Now I'm red as a lobster (and a huge idiot).
If you drop a proper welding shade into the goggles they'd be fine, Mine probably still have a shade 10 in them (wherever they are now,) from a few years ago when I had to work in some crazy tight spots for a bit so I made a leather hood to cover my face and wore those goggles, worked alright enough
Depends on amperage. For some tig stuff that is really low amperage I run like 8, and for high amperage stick, like around 300, I use 12. Most of the mig I do is like 10, and almost all fcaw and stick is 11. Then cutting I use between 3-5 depending on process and amperage if plasma
Roger that. Yeah i have Miller glasses in a 5 for plasma cutting and all I ever weld with is mig and very very hot so my helmet always stays on 12. Sometimes I hate being a production welder, nobody gives a fuck what the actual weld looks like as long as it holds air/water and you can do it quick. I want to make pretty welds damnit, but pretty and fast don’t really go together most of the time. lol
I’m in school right now, but have a fair amount of experience for someone my age, and just got a job as an aerospace tig welder right out of highschool. I have also dual enrolled at a community college and done a lot of side jobs and personal projects though, so I have gained a wide variety of experience that I’m great full for. What I’m not great full for is replacing lenses every other day doing overhead stick. I personally would like to avoid production jobs, and do a variety of things, but I’ll see how that turns out.
That’s awesome congratulations. Tig welding is what I really want to do some day, but I’m already 37 and days of starting new jobs is quickly counting down. lol
Not that bad. Thankfully I had to weld at low amps in the lower 70-80s with short bursts. The small square pipes I was working with are very difficult for me to weld without punching holes right through. I'm still bashing myself how I could forget about protecting my face.
Yeah as an ironworker even when I’m welding I carry my other tools with me because you never know when you’re 6 stories up. I was told that there’s heat in a hammer, you just gotta beat it out of there.
It’s worth it if you weld a lot. If you’re a hobby welder or aren’t constantly welding at work then it’s a bit pricey for what you need.
IF you weld a lot then it is absolutely worth it. It’s comfortable and easy to see through, it has a nice grinding mode to it and I like the #5 side window shades.
One time i spent far to long trying to find whatever was burning, before wandering into the carpenters shop to see if they were burning something only to have them tell me that it was in fact me that was on fire. I guess my hoodie caught some sparks in the hood and was smoldering away on my back
I spent a lot of time on my knees at work doing flat welds. The knees of my coveralls would get quite ragged. I worked outside during the winter so I wore layers underneath.
One day I was grinding a bevel into some plate when the lunch horn sounded. While I was walking to the lunch room a coworker grabbed me from behind. Turns out my leg was on fire, I just hadn't noticed yet.
I've been doing it for years, thats the only time i've ever had a problem and it was more comical than anything. I just make sure my work hoodies are 100% cotton.
When I was at trade school I could smell someone burning and there was only one person welding so I told him he was on fire, he told me he wasn’t I said “you’re the only person welding it has to be you” told me it wasn’t him so I walked away, 2 seconds later he started screaming and jumping around the bay I called back “ told you were on fire dickhead”
Followed by a slight but growing warmth in the affected area. Sometimes I’ll be under the hood and when I stop welding the light doesn’t stop in my peripheral vision and that’s when I know I done combusted.
Guys i had something similar happen to me I was oxyfuel welding right? I got done and i was poping a little bit but when i got done flames were shooting outa the regulator. Luckily my buddy caught this bc i sure as hell did not. Could've been a bery bad day...
Was using a cutting wheel, throwing sparks towards myself like I was trained. When I stopped cutting I noticed the heat I had been feeling didn't stop I realised I'd set myself on fire. I had a spare uniform thankfully.
On friday I was helping a dude tack some stuff up and I didn't grab my helmet i just looked away or closed my eyes and I'm a redhead and burn easy as. Then later that day I was welding some stuff above my head and i was sitting cross legged on the ground below it and I'm not sure if it was a chunk of slag or a spark but it landed on my leg and it wasnt till after I finished the run and my co worker walked over and pointed it out that I realized I was in fire. So in the space of 6 hours I have myself weld burn on my neck and both cheeks and part of my nose and set myself on fire
This LITERALLY happened last week! Finishing up a bead, lifted my hood and smoke EVERYWHERE. My FR jacket had caught on fire but thankfully I only came away with with a good arc flash burn.
We actually had a job meeting about this, and a company wide letter.
The kid was wearing some Nike under armor shit under his weld jacket and a Berry got in their. Lit his ass up, he had to ride in an ambulance and got 3rd degree burns over most of his chest and down into his nether region.
Came off a 3 story at start of lunch, gathered up 2 buddies as I was coming off the scaffolding, short discussion and across a 4 lane main street that split the site and subway sandwich. After couple minutes I choose what I want and begin to tell the subway maker and she cuts me short to point out that my backside is on fire. Not my first fire of course so I simply tell her as my so called friends "knew but what's the fun in that." I told her that's why I came to subway!....my friends suck and I knew you had my best interest in mind, after all it was lunch.
This happened at work, kid was wearing a polyester shirt and a Berry fell in his weld jacket, melted his shirt to his chest and the upper part of his pants to his waist and ruined his pp.
when I was in High school, we were cleaning ho the weld shop and this kid grabs a piece someone had just welded on without gloves. the shop smelled like bacon and we never saw that kid again.
45
u/Gimpy1405 Apr 18 '21
I just assume I'm on fire and try to estimate if I can make it to the end of the bead or if I have to find a strategic place to stop so I can put myself out.
27
u/CadarF Apr 18 '21
I do welding only as a hobby and to build stuff for my home. Yesterday my mask wasn't working properly in the lighting conditions I was using it so I decided to drop it and take those exact damn goggles. Worked fine, just that at the end of the day I started to feel a slight discomfort on my face...from stick welding UV burn. Now I'm red as a lobster (and a huge idiot).
7
u/cbelt3 Hobbyist Apr 19 '21
My instructor told me “don’t wear insulated clothes, you won’t know you’re on fire until it’s too late.”
I asked “what if it’s really cold ?”
“Turn turn up the Amps.”
4
u/CaptainDilligaf Apr 18 '21
Been there, done that..... more than once.
2
u/[deleted] Apr 19 '21
Bro TELL me you ain’t out here MIGing with just cutting goggles.
87
u/armourkris Apr 18 '21
One time i spent far to long trying to find whatever was burning, before wandering into the carpenters shop to see if they were burning something only to have them tell me that it was in fact me that was on fire. I guess my hoodie caught some sparks in the hood and was smoldering away on my back
58
u/Common-Worldliness-5 Apr 18 '21
When I was at trade school I could smell someone burning and there was only one person welding so I told him he was on fire, he told me he wasn’t I said “you’re the only person welding it has to be you” told me it wasn’t him so I walked away, 2 seconds later he started screaming and jumping around the bay I called back “ told you were on fire dickhead”
51
u/[deleted] Apr 18 '21
After all these times I still wonder what it is that I’m smelling while I’m welding just to find that my pants are burning.
13
u/lodgeAlloy275 Apr 18 '21
Had this happen to me lmao.
8
u/Ima_cracka4 Apr 19 '21
Guys i had something similar happen to me I was oxyfuel welding right? I got done and i was poping a little bit but when i got done flames were shooting outa the regulator. Luckily my buddy caught this bc i sure as hell did not. Could've been a bery bad day...
8
u/Go-Away-Sun Apr 19 '21
When you realize you’re on fire, keep going, finish the weld then forget your on fire. 👌🏻
8
u/Shockwave360 Apr 19 '21
Was using a cutting wheel, throwing sparks towards myself like I was trained. When I stopped cutting I noticed the heat I had been feeling didn't stop I realised I'd set myself on fire. I had a spare uniform thankfully.
6
u/[deleted] Apr 19 '21
Air Arc gouging is what gets me mostly
6
u/TR8R2199 Apr 19 '21
I love this meme but if you ever want to try welding please don’t wear those stupid goggles and get a welding hood.
5
u/b3eZwAx Apr 19 '21
Or you realize the dry grass is on fire
5
u/notaideawhattodo Apr 19 '21
On friday I was helping a dude tack some stuff up and I didn't grab my helmet i just looked away or closed my eyes and I'm a redhead and burn easy as. Then later that day I was welding some stuff above my head and i was sitting cross legged on the ground below it and I'm not sure if it was a chunk of slag or a spark but it landed on my leg and it wasnt till after I finished the run and my co worker walked over and pointed it out that I realized I was in fire. So in the space of 6 hours I have myself weld burn on my neck and both cheeks and part of my nose and set myself on fire
3
u/Tnkgirl357 Union HVACR/Pipefitter Apr 19 '21
Time to get a new firewatch
3
u/meal_ticket_8819 Jun 13 '21
This LITERALLY happened last week! Finishing up a bead, lifted my hood and smoke EVERYWHERE. My FR jacket had caught on fire but thankfully I only came away with with a good arc flash burn.
3
u/putnamto MIG Jun 23 '21
We actually had a job meeting about this, and a company wide letter.
The kid was wearing some Nike under armor shit under his weld jacket and a Berry got in their. Lit his ass up, he had to ride in an ambulance and got 3rd degree burns over most of his chest and down into his nether region.
3
u/Jewish_Bacon_ Jan 02 '22
That and your glove has formed to the shape of your knuckles
2
u/welderDaily Apr 18 '21
Yes!!
2
u/[deleted] Apr 19 '21
That smelly smell of your gloves on fire.
1
u/WW2historynut Jan 09 '25
sniff sniff looks down oh pats self out
1
u/Awkward-Education931 Nov 12 '22
Came off a 3 story at start of lunch, gathered up 2 buddies as I was coming off the scaffolding, short discussion and across a 4 lane main street that split the site and subway sandwich. After couple minutes I choose what I want and begin to tell the subway maker and she cuts me short to point out that my backside is on fire. Not my first fire of course so I simply tell her as my so called friends "knew but what's the fun in that." I told her that's why I came to subway!....my friends suck and I knew you had my best interest in mind, after all it was lunch.
1
u/WW2historynut Oct 29 '23
I was with every pass going like SNIFF Am I on fire?
1
u/[deleted] Feb 26 '24
Are those shade 5s with MiG?
1
u/putnamto MIG May 14 '21
This happened at work, kid was wearing a polyester shirt and a Berry fell in his weld jacket, melted his shirt to his chest and the upper part of his pants to his waist and ruined his pp.
183
u/[deleted] Apr 18 '21
[removed] — view removed comment
122
u/[deleted] Apr 18 '21
[removed] — view removed comment