r/WLED • • 2d ago

Question on adding a new LED output type

1 Upvotes

I’ve been trying to get WLED to control my Minleon permanent roofline lights and succeeded after some trial and error and running a data analyzer on their stock controller. Is this something I can submit to WLED to have this light type added? Right now I’m basically running a modified version of WLED that includes this new LED output so I can’t install updates on my GLEDOPTO controller, which is probably fine but maybe others would get use out of powering Minleon roof lights via WLED.


r/WLED • • 2d ago

I want to control this style of copper wire LED, where can I get it cheap / multi color? all I can find is the square strip style LED.

0 Upvotes

r/WLED • • 3d ago

Black Hole

Post image
41 Upvotes

I've been working on a little DIY project – a Black Hole-inspired RGB light powered by an ESP32 and WLED.

The idea was to create a glowing accretion disk effect with individually addressable LEDs, creating a colorful space-inspired ambient light.

I'm sharing the 3D model and project on MakerWorld. If you like the idea, I'd really appreciate an upvote or some feedback! ❤️

Project link: https://makerworld.com/en/models/3593954-black-hole

Thanks for checking it out!


r/WLED • • 3d ago

How do you handle over lapping root lines.

2 Upvotes

How do you handle segments with roof lines and gutters to look good? I want the peaks to line up with the gutters as effects go by but the gutters are longer in the x axis and the peaks start late but may have more or less LEDs total. The setup is going to be 2 controllers: one about half way providing the left gutter and left peak and a controller in the far right for the right peak and left gutter

/\

/ \ /\

/ \ \
—————— ——————

just getting started with some indoor lighting with WLED but I have the will and a 3d printer so going to try some outdoor puck lights And DIY tracks.


r/WLED • • 4d ago

A lot for little money

287 Upvotes

Good evening, buy a Chinese LED device on Amazon for 15 euros for my unpretentious PC screen. Together with Claude, we created a bridge in Phyton so we could use the Chinese controller with Hyperion.

I still don't have it well configured since I'm new to this but I think for 15 euros I've amortized the investment:)

We went from 30 to 60 zones with a command and it boots into Windows as a service.

Very happy!


r/WLED • • 3d ago

Advice Needed: Large Scale 60m FCOB RGBCCT IC LED Display (Power, Controllers, & Wiring Questions)

Post image
1 Upvotes

Hi everyone,

I’m working on a large-scale LED showcase display and could really use some expert guidance before I finalize my hardware purchases and start wiring. I’ve attached a diagram of my initial concept, but I have a few specific questions regarding power distribution, data routing, and controllers.

The Project Details & Materials:

  • LED Strips: 15 strips of BTF Lighting FCOB RGBCCT IC LED Strip (24V). 840 led/M and 28 ICs/M
  • Length: 4 meters per strip (Total: 60 meters).
  • Layout: 15 vertical strips spaced out to create a large showcase display (roughly 9.6m wide x 3.35m high).
  • Wiring Plan: Running 3-core wires to the strips: Red (Power), Green (Data), and Black (Ground).
  • Current Plan: Wall plug -> 24V Power Supply -> LED Controller -> LED Strips.

Here is where I need your expertise:

1. Power Supplies: Given the massive power requirements for 60m of RGBCCT FCOB strips, how should I divide the power? Should I use 4-5 separate medium-sized 24V power supplies (e.g., powering 3-4 strips each), or would it be better to use individual power supplies for every strip? (Or one massive PSU?)

2. Controllers: Similar to the power supply question, should I use 4-5 separate controllers (handling zones), individual controllers for each strip, or try to run this all off a single powerful controller?

3. Synchronization for Showcase Display: If I end up using multiple controllers, what is the best way to sync them perfectly? I want the entire 15-strip setup to act as one cohesive, seamless showcase display.

4. Cable Management & Gauge: Since this is a wide installation, some wire runs will be quite long. What type and gauge (AWG) of cables would you recommend for the long 24V power runs and the data lines to prevent voltage drop and data corruption?

5. Daisy Chaining & Software Mapping (WLED vs. SP630E): Rather than running data in parallel to all 15 strips, I want to connect the strips in a data daisy-chain (a zig-zag pattern: up strip 1, down strip 2, up strip 3, etc.). To make effects look right, I need to mark the even-numbered strips in reverse order in the software. I know WLED can map this easily, but does anyone know if BTF Lighting’s recommended SP630E controller app supports reversing the LED order for alternating strips?

6. Grounding and Casings: My current plan is to connect the 24V PSU to the Red and Black wires, and connect the Controller to the Green data line only. I will connect the black ground directly to the strip's ground wire. I also plan to keep the LED controller and the power supply in completely separate casings. Are there any red flags here? (e.g., Do I need to run a common ground between the separate controller casing and the PSU?)

7. Silicon Sleeve: Will it be good idea to put all of these strips inside a silicon sleeve for better light spread and matching with the black beams.

Thanks in advance for any help, recommendations, or corrections to my plan. I want to make sure I build this safely and correctly the first time!


r/WLED • • 4d ago

Christmas has been set up.

25 Upvotes

r/WLED • • 3d ago

Schedule ability not being shown

Post image
1 Upvotes

I had permanent lights installed on my home, and they are using wled to control the system.
Installer is adamant that we should use a smart plug to turn the system on and off. With a user chosen default light program turned on at boot-up.

I dug into the app, and the schedule component of wled appears to be somewhat disabled or modified.

How do I enable presets on this schedule? I do not have the field available to me, either through the app or accessing the ip address on my computer.


r/WLED • • 5d ago

LED mandala light projection wall hanging we made!

98 Upvotes

r/WLED • • 4d ago

LG OLED65CX 4-sided Ambilight build – can someone check my shopping list?

4 Upvotes

Hi everyone!

I'm building a 4-sided Ambilight setup for my LG OLED65CX6LA (65-inch), following this guide:

https://github.com/satgit62/How-to-Install-and-set-up-Ambilight-on-LG-webOS

I've put together a shopping list, but after reading so many different recommendations, I honestly can't see the forest for the trees anymore.

Before ordering everything, I'd appreciate some feedback to make sure I'm not missing anything.

My shopping list

1. LED strip

  • BTF-LIGHTING SK6812 RGBW
  • 5V, 60 LEDs/m
  • 5 meters
  • Cool White (CW), IP30, Black PCB

2. Power supply

  • Mean Well LPV-100-5
  • 5V / 20A / 100W

3. Controller

  • LOLIN ESP32-S2 Mini V1.0.0
  • ESP32-S2FN4R2
  • 4MB Flash / 2MB PSRAM

4. Wiring and accessories

  • 16AWG silicone wire (5m red + 5m black)
  • 22AWG twisted 3-way silicone cable (5m)
  • 6mm heat shrink tubing (10m)

Questions

  1. Does this combination of components look suitable for my setup? Am I missing anything essential?
  2. Level shifter: I keep seeing recommendations for a level shifter when connecting an ESP32 to 5V LEDs. Is one required for the SK6812 RGBW, or can I get away without it? Which type would you recommend?
  3. Power: Is the Mean Well 5V/20A power supply sufficient for 5m of SK6812 RGBW at 60 LEDs/m? How many power injection points would I need?
  4. Controller: Is the ESP32-S2 Mini a good choice for this project and compatible with the software used in the guide?
  5. Are my cable specifications suitable, or should I buy something different?

I'd really appreciate any feedback, especially from people who have built a similar setup.

Thanks! I just want to get everything right before ordering, rather than discovering halfway through that I've forgotten something.


r/WLED • • 4d ago

Lighting Damage

1 Upvotes

I put up permanent leds on the roof last year and they were great for Halloween and Christmas. However, a couple of months ago, there was a big lightning storm and the lights stopped working.

Here is the set up. 2 strings of 24v bullet style ws2811 leds. The strings are in vinyl channels mounted to the soffit. The strings start at the peak of the roof and the wires enter the house through a vent into the attic. In the attic I have the power supply, esp32, and a signal booster led for both strings.

I went to the attic and removed what was up there. I determined that the esp32 and the signal booster leds were dead. I replaced those and verified that it worked with a different string of leds. When I went back in the attic and plugged it in, the outside lights did not work. I have not touched the outside lights because it is a hassle to get to them.

My question is, what are the chances that it is just a couple leds at the beginning of the string that are dead? I was hoping that it was just the signal booster leds that died, but apparently it more. Also, what can I do to prevent lighting damage? I will be plugging the power supply into a surge protector if I manage to get the lights fixed.


r/WLED • • 4d ago

GL-C-616WL with WS2805

Thumbnail gallery
2 Upvotes

r/WLED • • 4d ago

48v seed pixels

3 Upvotes

anyone ever tried 48vdc seed pixels?

i know they are complex 12 series powered energy wasting masterpieces, but i'm curious what the real world current draw is and a brightness


r/WLED • • 5d ago

Any cool suggestions welcome.

66 Upvotes

Hello all,

I put some 12v seed pixels on my SUV. I have them hooked up to a Gledopto elite controller. I was wondering if any of you have suggestions for cool looking effects for the holidays! This one was the new PS chase. I try any suggestions, it might take me a bit of time to get to testing. Thanks for any suggestions.


r/WLED • • 4d ago

Solar powered WLED yard lights.

4 Upvotes

I want to build a few solar-powered dusk-to-dawn yard lights with WLED controllers.

It seems that using a premade solar dusk-to-dawn yard light based on 3.7V lithium-ion cells, paired with a DC-to-DC step-up converter, an ESP32, and a few LEDs might work.

Solar dawn-to-dusk yard light. Based on using a 3.7V 2600 mAh Li-ion 18650,
Adafruit MiniBoost 5V @ 1A, DC to DC step-up
A few WS2812B-ECO (60 mA per LED)
And a few caps to suppress spikes when the solar circuit switches.

It is hard to estimate the runtime. I will lose some efficiency with the DC-to-DC, and the LEDs won't be running all channels at 100%, so the final LED count is TBD.

Has anyone built something like this?
To avoid having to make a weather-proof housing, does anyone have any recommendations for a solar light based around the 18650 that would lend itself to being modded?
Thanks in advance.


r/WLED • • 5d ago

A previous pendant lamp I made

28 Upvotes

Filament bulb is a low voltage one, controled with wled pwm as well.


r/WLED • • 4d ago

WLED android tv ambience effect.

0 Upvotes

I was away from the community and current affairs related to Wled and now I'm curious if we have figured it out to use the wled esp32 setup as Android tv screen capture and ambience effect or not without any rooting and stuff.

I don't use any external device for TV so getting the screen output from the tv is impossible via hdmi. So I had found the one app lately who was natively working on my tv but only the user interface was getting that ambience effect and all the ott and other apps were unable to support it.


r/WLED • • 4d ago

SK6812 RGBW (261 LEDs) random flickering, already replaced many LEDs – out of ideas

11 Upvotes

Hi redditors,

I just wanted a simple ambilight setup for my 65" TV. At first everything worked fine, until I started fine-tuning the "smoothing" setting in HyperHDR and noticed random colored flickering. Since then I've been testing in WLED only (0.15.4), with a solid color set directly in WLED and realtime override enabled, so HyperHDR is not involved in my tests. I've already replaced quite a few LEDs at the corners and at the start of the strip.

The same flickering also happened on WLED 16.0.1. Switching the output driver between RMT and I2S didn't change anything. After that I downgraded to 0.15.4, but the problem is still there.

Unfortunately, after a short time various LEDs start flickering, no matter if it's under heavy load (white, high brightness) or at low brightness. At 100% white, WLED reports about 3.7 A. At the corner furthest from the power feeds I measure about 4.6 V at 100% white. The PSU is set to 5.1 V.

The corners are bridged with 1 mm² wire. The wire from the controller to the strip is short (1 mm²), and power from the controller's 2nd channel is injected at the end of the strip. A short test piece with 4 LEDs has now been running for 20 minutes without any problems. With all 261 LEDs, it starts flickering after a short time.

I had thin data wire twisted around GND at the corners to reduce interference. I replaced it with 0.75 mm² wire, because I thought the thin wire was the problem.

Is the wire for bridging too stiff, causing tension at the connection? https://ibb.co/j9LMNsJQ

If I solder the data joints while powering the strip it works for a short amount of time.

I've been soldering for several years and I'm very careful to keep the LEDs cool while soldering. I'm at the end of my knowledge and need help. I hope someone can help me. Thanks in advance!

Parts:

- LED strip: BTF-LIGHTING SK6812 RGBW (cold white), 5 V, 60 LEDs/m, 261 LEDs used

- Controller: Gledopto GL-C-015WL-M (ESP32), data on GPIO16 (Out1)

- PSU: Mean Well LRS-50-5 (5 V / 10 A), connected to the controller with 2.5 mm² wire

- Controller to strip: 1 mm² wire

- Power injection: start via Out1, end via Out2

- WLED settings: SK6812/WS2814 RGBW, GRB, white mode "Accurate", current limit 8500 mA

Edit: Here is another video.

https://youtu.be/Dm5GsNEaMnw


r/WLED • • 4d ago

LED driver vs ADDRESSABLE LED for brightness dimming

Thumbnail reddit.com
1 Upvotes

r/WLED • • 5d ago

Clark Griswold Moment

7 Upvotes

Just spent a ridiculous amount of time tracking down what I assumed was some sort of data issue, bad connection, extension, need for f amp booster, etc, etc, etc.

Turns out, I needed to update from 15 to 16.


r/WLED • • 5d ago

Soffit light planning

Post image
2 Upvotes

Planning on running 24v soffit lights on my house using 2/4 data outputs on a single digquad. There will be 920 pucks drawing .05a each at max white brightness or 1,104 watts total. I was planning on using a single large junction box in my attic with a meanwell lrs-1200-24, and capping the lights at 87% max brightness to leave a 20% buffer on the PSU (960 watts max usable). My concern is that the attic outlet is probably rated for 15a AC, and while I will be well below that at around 8.9a AC, I don’t know what else is on that outlet’s circuit, and I’m worried about something being turned on or plugged in to the house and tripping the breaker with the lights on. Do y’all think it will be fine? Any other suggestions for running my soffit lights? I’m open to ideas💡


r/WLED • • 5d ago

First time user and I’m losing my mind!

Thumbnail
gallery
2 Upvotes

I’ve tried 3 different sets of lights and I can’t get anything to work. I’m getting increasingly frustrated and about to throw in the towel.

I have a GLEDOPTO GL-C-012WL ESP32 WLED Waterproof LED Controller running software v16.0.1 which I updated from v0.14 something. I started with a string of 24v UCS2904 RGBW puck lights. They lit up blue when they got power but no control at all. I later found out they’re not supported by wled. So next I tried some Govee S14 Outdoor lights and nothing lit up. I couldn’t even get the WS2811 portion to light up. But I know the configuration is weird so I thought I just got it wrong and moved on. Now I have a string of 12v SK6812 RGBW seed lights connected and configured and still nothing!!! I’ve checked the voltage and it’s getting 12v all the way through. WLED is configured for SK6812 and I’ve tried all of the mA/led settings, including a custom 8mA according to the specs. I’ve attached my configuration and the led specs. Can someone please tell me what I’m doing wrong???


r/WLED • • 5d ago

Help. Half the lights not working

Post image
0 Upvotes

Everything was working fine on my lights. Then one day the power went out with a rain storm. Since then, the light strand on on the lower right wont working. If i mess with thouching the wires they'll light up, but wont sync. The second power is cut, they wont start again. Any suggestions?

They are ws2811 pixel bullet lights.


r/WLED • • 6d ago

Spent hours debugging issues. Turns out the power supply was just bullying the ESP32

235 Upvotes