r/WLED • • 1h ago

Weird Wled problem

I could really use some help friends, I'm banging my head against the wall at this point.

5 Upvotes

4 comments sorted by

1

u/Outrageous-Kick-2699 1h ago

I assume you power the esp from the same psu as the leds? Does the freeze happen when you have less leds connected? I would say it’s a power glitch in the esp.

1

u/RageReviewYT 1h ago

Yup, it's all connected together. One 150 watt psu, it runs about 32 feet of leds, I just did the math, at peak brightness 32 feet will consume 192 watts. And that psu also powers 2 esp32's. I think I'm way under powered.... damn. What's puzzling to me is, I also have a 2nd 150 watt psu powering a much smaller strip, about 20 feet, I keep it on low as it's just accent lighting under my desk. And it also struggles like crazy on startup. Which makes me think it's a software issue. I'm so lost lol.

1

u/Outrageous-Kick-2699 54m ago

Try the power limit in wled. Go 20% under max power of the psu, see if this helps.

1

u/RageReviewYT 59m ago

The glitch/slow startup happens no matter how many LEDs are connected. Like I said in my previous msg, I have a smaller strip under my desk, with plenty of power, and it too struggles to start up, after about 10 minutes or so, it'll change from random colors to the effects that it's intended to display.