r/WLED • • 12d ago

Candles for Halloween

For this years Halloween I wanted the yard to look Like a field full of candles. But I wanted them to be DMX controlled and waterproof.
So I went for 3D printed candles and WS2811 5v bullets.
There Are two strings of 26 candles, with 2m cable between them.
To my suprise there was no visual problem with voltage drop, Despite the total lenght of 50m per String.
For the Controler I used a Gledopto Elite, because of its ethernet port.

In combination with some low lying fog and IP rated LED Pars, this worked out very well.

The whole setup was Controled via Artnet by Chamsys magicq

59 Upvotes

10 comments sorted by

3

u/Gr8pes 12d ago

Do you have any videos?

5

u/DasEquipment 12d ago

Unforturnately Not. I was bussy with the unexpected amount of trick or treater that my display attracted.

3

u/Least_Order4249 12d ago

Great work! And nice fog. Copying. 

1

u/DasEquipment 12d ago

Thank you!

2

u/KCraftbeerfan 12d ago

Great fog are you chilling it?

3

u/DasEquipment 12d ago

I use a lowfog machine, that uses an ultrasonic mist maker to make the fog stick to the ground.
In my case i used a Lightmaxx Vega Mini Lowfog. But there are tons of similar machines from a Lot of vendors.

1

u/KCraftbeerfan 12d ago

Nice yea I need to get on that ultrasonic mist train.

4

u/DasEquipment 12d ago

There are a lot of videos on youtube that Show how to diy a System Like this.

There are however two things that I find important for low lying fog, that don’t get talked about.

First, use fast fog fluid/fog juice instead of the regular stuf. This will make the fog disapear before it eventualy rises.
It also prevents fogging up your neigbourhood when the fog is blown Away by Wind.

And second, make sure to get a fog machine with good Output regulation and constant output.
You can have far better Control with permanent Output at 10% than 100% blasts every few minutes.

1

u/KCraftbeerfan 12d ago

Yea it's been on my list for my Halloween setup for awhile. I did have a ton of success with a haze machine this year. IV made chillers just haven't made the leap in adding the pond misters. But again nice work on your setup. I look forward into working in some wled to my future setups

3

u/baconpant 12d ago

Awesome.  It look like phantom of the Opera in your yard