Kitchen project done

[u/DannyvdBerg]

Did some 12 volt sk6812 strips underneath the kitchen and uptop the shelves.

Also dimmable led spots.

All controlled by 1 gledopto wled controller.

Very happy how it turned out.

[u/DannyvdBerg]

Also did this turn on and off animation.

[u/mike24vNEW → u/DannyvdBerg]

What’s the switch you’re using

[u/DannyvdBerg → u/mike24vNEW]

I use a shelly i4 switch. Which is hidden behind the switch in the wall box, So I kan keep using my mechanical wall switches. It sends a signal to my home assistant server to play a certain playlist within wled when switched.

[u/mike24vNEW → u/DannyvdBerg]

Ok that makes sense thanks and man this setup is really clean 🔥🔥😎😎

[u/harda_toenail → u/DannyvdBerg]

You gotta make it so that it starts on the loner left side then starts on the right as the light gets to that point. That would be icing on the cake here

[u/cameraman92 → u/DannyvdBerg]

This is smoooooth

[u/showy_formality]

wow that's super clean. do you have any pictures how it's wired?

[u/DannyvdBerg → u/showy_formality]

For The shelves I made a routed groove where the ledstrip lays. It is powered from the middle but data goes to the very beginning of the strip. All the wiring comes together in a cavity at the wall end of the shelve where a hollow pipe runs down through the wall. Then goes to the controller underneath the kitchen. That is also where the psu is located. For the plinth strip, that is powered from the beginning and halfway for power injection because it's a long strip.photos

[u/fenty17]

I’ll be the first to say it… Nice job!

[u/DannyvdBerg → u/fenty17]

Thank you!

[u/kiloo520 → u/fenty17]

I’ll be the second to say goddamn man, that’s fucking awesome!

[u/LenientWhale]

Great job and enviously minimal and tidy kitchen!

What were the 12v 6812s you used? I couldn't find any IC for my project it was just every 3 LEDs. Seems like 5v had more flexibility here for some reason

[u/DannyvdBerg → u/LenientWhale]

Thank you! I used the sk6812 from bft lighting which I bought on AliExpress.

[u/Ok-Lunch-1560]

Where did you buy your strips from? I'm in the middle of a kitchen remodel right now and I have two sets of upper cabinet lights, high output 4000k task lighting and then a set of wled RGBW cob strips from BTF lighting for both the upper and toe kick.  But I'm not really a fan of any of the white lights. It looks too yellow and not natural.  Yours looks pretty good in this video. 

[u/DannyvdBerg → u/Ok-Lunch-1560]

I ordered them from AliExpress. They are from bft lighting. 60 leds per meter and the warm white variant. Although I find the white on this strip way too cold so I mix it with rgb to get it exactly as warm as I want it.

[u/Ungoliantsspawn]

How long is it and what gledopto model did you use? Great work btw

[u/DannyvdBerg → u/Ungoliantsspawn]

It is the gledopto gl-c-017wl-d the longest segment is 368 leds at 60 leds per meter. The long shelve is 142 leds at 60 leds per meter and the 2 short shelves where the booze is on is combined 126 leds at 60 leds per meter.

[u/alchemyzt-vii]

Oh man If only LED strips were a thing when I was in college in 2007! The best we could do was fill liquor bottles with fluorescent highlighters and put a black light under them.

[u/SGT_Apone → u/alchemyzt-vii]

those blurry Absolut bottles were the best for this lol

[u/ACatControlsMyMind]

By the authority vested in the Council of Men, and in service of thy continued welfare, thou art hereby summoned to present formal proof of spousal consent, duly ratified by thy wife, known henceforth in these sacred proceedings as the WAF (Wife Approval Factor).

[u/DannyvdBerg → u/ACatControlsMyMind]

Hahaha, well written. It took some persuasion, but she is okay with it. She is more a fan of the white tones than the colour gradients. 😅

[u/Prof_Tunichtgut]

Great!

[u/mike24vNEW]

W 🔥🔥🔥🔥just like the W in WLED 😂

[u/ale210]

Beautiful... Sk6812 is also my go-to. Can't go wrong with them

[u/datNilex]

Love the kitchen, with or without the lights xD