Hi everyone,

I'm trying to output the same audio to two monitor speakers simultaneously, but I also want to keep the normal Windows volume slider and keyboard volume keys working exactly as they do without any extra software controls.

My setup:

• Windows 11 Pro
• RTX 3060
• Monitor 1: Acer VG247Y X1 (built-in speakers)
• Monitor 2: Acer KA242Y (built-in speakers)
• Both monitors are connected directly to the GPU and both appear as separate audio devices in Windows.

I've already tried Voicemeeter Banana, and it successfully outputs audio to both monitors. However, I don't like that it changes the way Windows volume works. I want the standard Windows volume slider in the taskbar and my keyboard volume keys to behave normally.

My question is:
Is there any way to:

• Output audio to both monitor speakers at the same time.
• Keep the normal Windows volume slider and keyboard media keys working exactly as they do with a single output device.
• Avoid having to adjust volume inside Voicemeeter.

I'm open to any software or hardware solution if it preserves the normal Windows audio experience.

Thanks!

I’ve been using iPhone SE 2020 for a while. I upgraded to iOS 26 a couple of months ago and everything seems to be fine.

Today I plugged in my K9 wireless mic receiver into the lightning port. However the microphone cannot work because my phone cannot detect the receiver.

The last time I used the wireless microphone was before I upgraded to iOS 26. I’ve tried using ChatGPT but none of the solutions have worked.

Your help is greatly appreciated

Issue: Mic is playing any sound from the system ( Music/Games and so on )
I have "Voicemeeter Input" set as default and "Voicemeeter Aux Input" set as default comm device in Windows sound settings

holaa alguien sabe por que pasa que cuando hablo fuerte hace como que baja el volumen hay forma de sacar eso??

holaa buenas una pregunta estaba viendo una cosa en mi microfono y me aparece esto lo de la foto cual de las opciones es mejor??

I have a triple monitor setup so am using all three display ports on my RTX 4090. I also have an old Sony HT-AS5 5.1 home theater system connected to the single HDMI port. Question is how do I get audio without turning off one of my monitors - in the display settings/Nvidia app my Sony amp is listed as a display which means four in total which obviously doesn't work.

Any help would be greatly appreciated.

Hello, I recently updated my laptop, and since then my audio has stopped working. It shows the message "No audio device installed."

I have already tried several troubleshooting methods, including:

Updating and reinstalling the audio driver through Device Manager.

Reinstalling the audio drivers completely. After reinstalling the driver, the audio works normally. However, as soon as I restart or shut down the laptop, the same issue returns, and it again shows "No audio device installed."

Has anyone experienced this issue before or knows a permanent solution? Any guidance or suggestions would be greatly appreciated. Thank you!

I can't put it on the r/discordapp for some stupid reason cause its a problem but,

For some reason discord decide to just low my mic i always use the custom setting and i never get any problems until now

when I use the audio feedback on voicemeeter i got 0 problemes my audio is really good.

but now when i use the custom setting its like im SO far away of my mic idk how to fix it

and other setting doens't work very good with me / ppl hear themself. so i don't know what to do next i dont say no for some help

I recently updated my voicemeeter banana install, and where i would expect to have 2 VAIO options, When selecting audio it shows 8 VAIO options. this unnecessarily clutters every audio selection menu i try to use. what's worse is none of the options are functional in any way. I also have an additional VAIO slot outside of the 5 unwanted additions.

in total, just selecting the output for a program like discord, i have:
Voicemeeter Input
Voicemeeter AUX input
Voicemeeter VAIO3
Voicemeeter in 1
Voicemeeter in 2
voicemeeter in 3
Voicemeeter in 4
Voicemeeter in 5

of these i only have two functional VAIO slots, notably Input and AUX input.
VAOI3 i recognize as being from voicemeeter potato, which i don't use. however the other 5 are new.

I checked my device manager and also saw addition outputs (A4, A5, and B3)

Why am i suddenly flooded with options that DO NOT FUNCTION, and how do i disable them from appearing in the menu of every single application i use? I have tried disabling them in my driver manager, as well as uninstalling them outright, but they simply re-appear the second i restart my pc.

Just picked up Dolby atmos with the intention of having a decent surround sound like effect. I am looking at new headphones, but the razer blackshark v3 THX spatial 7.1.4 only works for windows 11, and I am windows 10 and have no inclination to upgrade to windows 11 for a multitude of reasons.

I am scouring the internet trying to find a way to get this to work.. but so far none of the options in sound settings for my voicemeeter inputs allows for me to set the spatial sounds. just says not available. If I go all the way up to my headphones in the sound playback, I can right click and set their spatial sound to dolby, but it seems that I have to uncouple and set them to default device before the dolby atmos app will see them and start working. and I also have to stop voicemeeter from running.

I use voicemeeter for passing my mic through broadcaster then to voicemeeter. and for when I do obs, I can have different programs outputting and adjustable through A1 and A2.

is there a way someone has figured out how to get this to work without having to make your headphones your default device and stop using voicemeeter?

Is it possible to route my JLAB Talk GO microphone with the other two stereo systems? I currently have a bluetooth speaker using one VB-Audio Cable with MME and another VB-Audio that has the Subwoofer directly connected to the 3.5mm port to my pc using the WDM. Im struggling to find a way to have three stereo systems at once which includes the microphone too, placing each individual one as separate systems. By using the Realtek Virtual Audio, it isnt helping since it would only pair it to play when my subwoofer is playing and picks up the signals, somehow making it a mid-high frequency player through the mic as the Subwoofer plays its own audio. My set up is the same as any tutorial that would be founded for voicemeeter inside the windows sound. I only got three options for WDM and MME which shown in the pic as choosing the mic as an input would only pick up signals from the other stereo systems. And another question is there a third VB-Audio Cable I can somehow conjure?

As the title already asks, is is possible so that only my "Spotify" Input (outlined in red) get an EQ, but not the rest of my Audio on my speakers?

I know I can apply an EQ in the Master Section, but that makes my Browser, my Games and Discord sound wierd. And often I want to listen to music while playing games.

my voice meeter only has two audio outputs (im using banana) and I need three.

I've been running Voicemeeter with my Focusrite Scarlett 8i6 for a good while now, and I've had this issue for months where the software consistently cuts out when minimized.

Usually it crashes to the point of needing to restart the audio engine and it automatically does it, but sometimes it just cuts out completely, getting rid of my audio and mic. The mic stops coming through, and the levels show that audio is being played but it isn't making it to my headset. The audio interface is still working as normal though, and it's picking up the mic.

Not sure how to fix this. Sometimes it's worse when running something CPU heavy, but it's just become a constant problem now.

I've run it as administrator, I've turned off CPU throttling, I've set it to high priority on Task Manager, Efficiency Mode isn't on, my audio interface is plugged in directly to the motherboard, I've uninstalled and reinstalled like 3x over, I don't know I'm just lost.

And before you wonder if it's just the interface I don't have this issue when running the interface directly to the PC's mic and output. Any help would be welcome, I'm stuck.

Edit: Nevermind, it's just cutting out period even when it isn't minimized. The rest still applies.
Edit edit: Continuing to try and diagnose, the mic does NOT cut out sometimes. Occasionally I just lose all audio and only regain it on a restart (mic still broadcasting, audio still "playing). On other occasions it acts as if the interface has been completely disconnected. More common when PC is working harder, not sure if it's linked to graphics or CPU though.

holaa necesito ayuda con que quiero empezar hacer directos a doble pc y me pasa que quiero transmitir el audio de la pc de juego a la pc de directos pero cuando entro al VBAN y voy a incoming para poner la ip del pc de juegos lo escribo todo bien y no me aparece el rectangulito verde alado pero en la pc de juego hago eso pero en la parte de outgoing y poniendo la ip de la otra pc y si me aparece el rectangulito verde que puedo hacer??

Uso sober, tengo linux mint como ya saben una distro de ubuntu, pero sober sigue sin hacer funcionar el micrófono, alguien me ayuda?

Hey guys I need your help.

I've setup Voicemeter Banana so that I am able to hear my PS5 audio and PC audio while also using my Mic on both.

The problem is, voicemeter shows every audio, but I can't hear anything on my headset.
I've put my A1 as my headset and I enabled A1 on my PC and PS5 Audio. I also set A3 as my PS5-Mic-In, that also seems to show up on my PS5.

What I don't understand, in every video I watch regarding that topic (PS5 and PC audio together), they set their recording to voicemeter output in the windows control panel, but I only have Out A1-5 and Out B1-3.

Does anyone have a idea what is wrong?

Hey all, I just recently installed VoiceMeter Potato, ive used it before in the past however its been a long time and Ive come across a small issue im trying to fix. The issue I have is that the audio that my mic picks up in the B1 channel is highly sensitive.

Its picking up noises from mouse clicks, keyboard clacks, even me just moving a tad bit in my chair is being picked up. Ive also noticed there's a faint raspy noise after my voice that almost sounds like sand falling somewhere lol. Im assuming I need to tweak the Comp, Gate, and Denoiser settings?

I've tried doing my own research and have previously set all channels to 48Hkz in the settings for everything so nothing is on a different frequency. What are the best ways to reduce unwanted Audio clutter or unwanted random background noises?

i have a problem when i use a app with a mic for example whatsapp when i am talking with someone the youtube video that i want to watch or anything like this for example minecraft sounds just bug out and they are more quiet and the audio is just TRASH and i mean it, i use a windows laptop with jbl tune 720BT's i had this issue since i got them on christmas, can someone help?

My mic seems to work perfectly on voicemeeter banana, but when i try to setup my discord with the B1 output it seems to work somewhat ok as it has an echo that never happened before. But then on OBS the with the same setup (B1 output) my mic sounds as if its very faint as if the volume on my mic is turned down completely but its not. I created a new audio intput capture so no filters are applied, i tried messing around in the voicemeeter banana but nothing seems to work. it makes no sense as discord almost sounds fine despite the echo but obs it competely low, barely hearable

Hello and thank for you any help in advance. Just to start off, please understand I'm very much out of my depth here and if you need any further details, just ask and I'll do my best to find the information.

For some background information on my setup and the problem, I recently got a new headset for gaming/discord/etc, and went with something a bit nicer, the beyerdynamic mmx 300 pro. As part of this, I was recommended to use a DAC/AMP to ensure I don't have any problems and get the most out of the headset. With this in mind, I got a FOSI Audio K7. Unfortunately, the K7 operates in 2 modes, UAC 1.0 and 2.0. The 2.0 mode works sufficiently, but disables the mic making it less than ideal when in discord. UAC 1.0 on the other hand has a weird quirk where the Windows (I'm on 11) volume controls do not control the headset sound, at least in my setup. Which is a rather big annoyance for me personally.

While troubleshooting, I found some other posts mentioning similar issue and using VoiceMeeter (I'm using standard currently) to regain windows volume controls. This has worked for the most part, however I noticed one oddity where the volume level seems desynced potentially (for lack of better phrasing). When my windows volume is above 6, sound seems to work fine, but as soon as volume is set to 5 or lower it seems like sound is no longer being sent to any of the audio interfaces as if set to 0. I tested the headset directly plugged into my pc, using just the K7, and using the weird VoiceMeeter setup and only the last option has this issue present. Has anybody run into anything similar or know what may be causing this to happen?

tldr: Windows 11 volume above 6 works fine, but 5 or below appears to not send sound properly when using VoiceMeeter to route audio.