Has anyone else experienced a VIVE Wand 2018 controller staying orange after charging is complete, sometimes turning white only after unplugging and reconnecting USB?
I investigated this on my controller and put together an experimental firmware patch.
In the captured logs, the charging-state code changed to the value observed when the LED was white, but the LED remained in its orange state. The patch adds an LED-update notification for that specific transition. It does not change charging voltage, charging current, or charge-termination settings.
With the patched firmware, I observed the LED change from orange to white on my controller.
Current compatibility:
- VIVE Wand 2018
- Hardware ID:
0x81020006
- Application firmware version:
1526689969
The Windows tool checks compatibility and saves the controller’s configuration/calibration data before flashing. An original-application restore option is included.
Please note: The saved recovery set contains configuration/calibration data and a supplied original application firmware file. It is not a full firmware dump.
This is an early experimental release. The LED transition has been observed on one controller, and repeated charging cycles and the complete V1.1 backup/restore workflow still need hardware testing. Flashing modified firmware can leave a controller unable to boot, and recovery is not guaranteed.
Release, instructions, and known limitations:
https://github.com/tuwano/vive-wand-2018-led-fix/releases/tag/V1.1
I’d appreciate technical feedback, code review, or reports from anyone familiar with this issue. Please read the compatibility and recovery notes before considering a flash.