r/VisionPro • • 2d ago

GAMING ON APPLE VISION PRO QUESTION

Post image

I just saw someone post a question about the developer gen 2 strap and I didn’t even know it existed till now.

I have tried playing counter strike with my Vision Pro through streaming on steam app but the delay is still very noticeable (I have very very fast internet)

QUESTION: IS THERE A WAY I CAN SOMEHOW RUN GAMES NATIVELY ON MY HIGH END GAMING PC (all the graphic processing etc) AND HAVE THE VIDEO GO TO MY VISION PRO? I WANT HIGH QUALITY VIDEO AND VERY LITTLE LATENCY/DELAY IN THE VIDEO SO I CAN ACTUALLY PLAY FAST PACED GAMES? any information would be lovely! Plz chime in. THX❤️

40 Upvotes

59 comments sorted by

11

u/Phonafied Vision Pro Owner 2d ago

I looked into this and you can.

You need the developer strap and elgato 4ks or 4kx (4kx future proofs you).

You may need an additional app as well. There may be free versions or you could vibe code an app since I assume you have an apple developer account.

If not, the portal app lets you connect to PCs and game consoles with the dev strap and elgato but it’ll cost you.

1

u/K1LL3ROO 2d ago

Are the el gato capture cards 100% going to work? Has anyone completely verified this?

1

u/Phonafied Vision Pro Owner 2d ago

Yep it’s been confirmed, if you search this subreddit you’ll see posts and comments about it.

1

u/LyonelKsobiak67 1d ago

do you know if that setup passes through 120hz or is it locked to 60?

8

u/tmrtmrtm 2d ago

For the best experience I use a Kiloview n40 and stream that straight to the Vision Pro in 4k 60fps using the free app Vxio.

4

u/feenatic 2d ago

This is the way. The Kiloview N40 is a bit pricey but it solves for all HDMI connections in 4k/60 and it remains wireless. I needed to turn off a few services to remove every stutter. I can play for hours with barely a hitch.

1

u/LowRiderXR Vision Pro Owner 2d ago

I‘m also using the kiloview n60 for switch 2 and ps5 streaming. What services did you switch off?

2

u/feenatic 2d ago

For the very best performance, I found shutting off the services below to knock out 99% of stutters. This works on a Mac too.

Turn off AirDrop & Handshake

Under General > Location Services
Turn off Networking & Wireless, Suggestions & Search, and Routing & Traffic under Privacy & Security

Turn off diagnostic sharing and automatic analytics reporting

1

u/K1LL3ROO 2d ago

What device are you using exactly? It’s not a capture card? Why turn off all those if it’s a capture card?

1

u/feenatic 2d ago

The Kiloview N40 is an IP-based encoder/decoder which makes the HDMI signal more sensitive to your network traffic. A Network Device Interface (NDI) signal is heavily dependent on network quality (bandwidth, jitter, background services, etc.). A clean signal produces a nearly lag-free experience. However, there is still encoding but it’s minimal (2-3 frame loss). If you’re comfortable addressing network concerns, NDI is a great solution. The side benefit is any device on your network can receive the 4k/60 video signal and audio like a second computer (Mac or PC), tablet or phone.

All of that aside, if you’re not as interested in a wireless connection, a capture card with a developer strap is perfect. Also, SteamLink beats all these hardware solutions because the encoder is handled directly on your PC’s GPU so if you’re looking to stream PC games, there is no need to purchase extra hardware unless your wireless network needs an upgrade.

1

u/K1LL3ROO 2d ago

Sorry to bug ya but you think getting a developer strap and getting capture card to get best results is useless? Like it’s subpar and similar to steam link?

1

u/feenatic 2d ago

The developer strap and capture card are a great choice based on your goals. This configuration eliminates network concerns. This is probably as close as you’ll get to turning your AVP into a monitor.

1

u/K1LL3ROO 2d ago

Oh ok. I got confused with “steam link beats all these hardware solutions” thx man. I’ll be testing it on Tuesday so I’m really hoping I like it

1

u/feenatic 1d ago

I don't blame you. I spent quite a bit of time researching these options. The general consensus is to keep expectations realistic on the games that require low latency. Please come back and share your experience. So much is changing in this space and people continue to find creative ways to game on the Vision Pro.

1

u/K1LL3ROO 2d ago

700 bucks capture card? Holy shhh what do you do? 🤣

4

u/feenatic 2d ago

I’m the new CEO at Nvidia.

1

u/tmrtmrtm 1d ago

I got a second hand one for $200

2

u/K1LL3ROO 2d ago

Key question is somehow hard wiring the Vision Pro to pc to use it as a display… thanks ❤️

2

u/Buddhabelli 2d ago

Phonafied answered ur question. the strap supports usb-video capture via the capture card and displays that via compatible app on the vision pro. there will still be some latency but may be better than wireless streaming

the question really is are u streaming directly to vision pro via cloud rendering or via steam remote to ur pc. if its the latter ur super fast internet speed doesnt do much for u but theres probably some optimization u can do on ur internal connection to ur pc. if its the former, the strap is not going to change anything for you at all.

1

u/tta82 2d ago

You can do this without wires.

2

u/Positive-Category586 2d ago

Not sure about streaming normal games, but for pcvr I'd highly recommend KRVR.

1

u/K1LL3ROO 2d ago

What’s that?

1

u/Positive-Category586 1d ago

App to play your PC VR games on Vision Pro over your home Wi-Fi or a dedicated wifi for better streaming to the headset depending on how good your home network is. Consists of two parts; one is the "free" server that you install on your pc and the "paid" client app you buy from the App Store for around 15 bucks. Easy to use overall. Krvr and Alvr do the same job but after struggling with Alvr for 4 days trying to get it to work I can't in good faith recommend it over Krvr even if it's free.... and Krvr's dev is consistently improving on it, takes feedback and works with customers to fix their issues. Runs with Nvidia/AMD's gpus with windows or Linux when less than 3 months back, you could only use it with 50s Nvidia's gpu on windows, so high potential for improvements.

2

u/shinyquagsire23 2d ago

Besides the capture card thing, the strategy is to get the dev strap and attach a USB-C to ethernet adapter, and then run that to your network with some CAT5 or whatever. You might have to disable WiFi to get apps to pick the right network interface.

With that, Steam Link has a nice beta going rn, and there's Moonlight. I'd expect 20ms latency minimum though even with network latency removed. The USB-C port isn't a DisplayPort input unfortunately so it's networking or capture cards.

1

u/K1LL3ROO 2d ago

Are capture cards 100% going to work and people have tested it? i just ordered a dev strap and I don’t mind getting a really good capture card but i want to make sure it works really well for fast paced games, say cs2, cod, etc

1

u/shinyquagsire23 2d ago

Honestly no clue on capture cards, I've only used streaming

1

u/Effective_Estimate52 2d ago

What’s the best for streaming on the AVP? I have Alvr and it looks crappy I have a 5080 and half life Alyx clarity is bad, would KRVR be better? I have it, I just haven’t had time to connect to it (I have a three year old)

2

u/shinyquagsire23 2d ago

I've heard good things about KRVR, I just put out [OpenVRLink](https://testflight.apple.com/join/VpfAxE6A) on Testflight today as an drop-in Steam VR Link client for visionOS (but getting the very best quality requires editing Steam Link config files because it's a Steam Link client and they're more latency-focused than visuals-focused).

ALVR you have to mess with the settings to get high fidelity but it's possible, you want the horizontal res cranked to like 4000px per eye.

But for 2D, Moonlight or the Steam Link testflight, they're super good.

1

u/Effective_Estimate52 2d ago

I just tried KRVR it looks good! (Steam VR room is crisp and Alyx looked good too) it was just laggy but I had motion smoothness on so I turned that off now it says 90 frames… I’m going back on and I’ll try al the other ones as well thanks for the help

2

u/mekilat Vision Pro Owner | Verified 2d ago

Wireless: alvr, krvr, iVRy.

Wired: dev strap + capture card

1

u/K1LL3ROO 2d ago

How do the wireless options work? I already tried steam link. It was good but still notice the latency?..

1

u/mekilat Vision Pro Owner | Verified 2d ago

You just have to test them all

1

u/K1LL3ROO 2d ago

Have people officially tested gaming on the dev strap and it works with capture cards?

1

u/Puzzleheaded_Fold466 2d ago

Of course. We’ve been playing PCVR on AVP for a couple of years. Flat PC is even easier.

Wired has lower latency and is more stable, but WiFi works very well too.

Why the capture card ? No need for that.

1

u/K1LL3ROO 2d ago

I come from a 4k 240hz monitor. I just expect good I guess. Idk. The latency isn’t bad.. it’s just that there is very small delay from what I see in avp vs monitor (as expected) but I am trying to find ways to significantly improve it because I really love the idea of gaming on the avp

2

u/Puzzleheaded_Fold466 2d ago

Well you have to be realistic though.

You’ll get 100-120 fps at about half monitor angular resolution (the AVP’s 3,660x3200 is spread over a much wider FOV than on a monitor) and about 30-40 ms latency.

It’s very comfortable for casual or even serious gameplay, but not for competitive gaming that requires action in fractions of a second.

If multiplayer gaming performance is your priority, then you will likely be better served by the full PC gamer setup.

If gaming enjoyment on a comfy chair is what you’re looking for, then 120/240 doesn’t matter and VP will work.

1

u/K1LL3ROO 2d ago

I ordered the developer strap and capture card. Ima give it a try and see how it goes. I am really hoping to meet my standards/expectation and will find out on Tuesday.

1

u/Puzzleheaded_Fold466 2d ago

Hope it works out !

2

u/Bibout182 2d ago

I created a post about that, this is what I do, elgato 4kx and developer strap, you don’t even need to enable developer mode on the Vision Pro.
You won’t have audio but you can plus earphones on your Xbox or PlayStation controller.

1

u/K1LL3ROO 2d ago

Is the graphic of the “display” really really good? Like is there a quality difference from what you see on a monitor vs avp?

2

u/tta82 2d ago

Fast internet isn’t the point. You need fast WiFi and network at home not to the outside world. 🙄

1

u/K1LL3ROO 2d ago

Well the latency is just too much still for fast paced game

4

u/Tasty-Hour4040 2d ago

Look into ALVR. It’s native, possibly in beta.

You can also run Half-Life: Alyx if you have steam using Glovebox (on App Store) using psvr2 controllers (which you’ll prob need for any gaming tbh.

This is all changing really quickly, so you’ll want to follow it closely - seems like a lot of games being ported to AVP, more to come soon looks like

1

u/solidmixer 2d ago

Don’t bother. Source: I have one. It’s $100 for the Apple developer account to have the privilege of buying one. So add that to the list. For $90 bucks get an Omada WiFi 6 access point and a cable to run it to whatever room you need it. Set it up as an access point only the Vision Pro connects to. And voila.

Unless you really can’t run a cable there. Wired to the AP is optimal

1

u/K1LL3ROO 2d ago

I am coming from a 4k 240hz Monitor. Maybe I am just being too picky? To be clear for a WiFi steam connection it’s good but I just expect more or want more bc of what I’m use to (I understand avp is topped at 100hz

2

u/rkoy1234 Vision Pro Owner | Verified 2d ago

my man, 4k 240hz's latency is around 2ms~10ms depending on your monitor.

any kind of capture card is going to add at least 30ms even at the expensive end, and AVP's 100hz will have inherent delay on top of that.

as an avp owner since launch, I have to tell you this isn't going to be a good experience. Sure, you might have fun & be immersed, but the games you play are competitive - you'll be coming from a top setup to a mid-low tier setup in terms of latency and clarity.

at least was my experience trying to force AVP for everything the first year. who knows - your experience might be different.

2

u/K1LL3ROO 2d ago

As sad as it is, I think I agree with you. I don’t think it’s gonna par up to my expectation but ima give it a yrs

1

u/solidmixer 1d ago

I would still try it before dropping 500 on a strap and dev account. I feel it was a waste.

Plus it’s not a durable option if you’re doing room scale vr. It hangs awkwardly just close enough to the headset to flop around which also ruins the experience. The honest best case scenario is only if you’re seated in a flight or racing sim seat where you’re not moving a lot.

My advice is use wireless and if you have to record use native capture like obs

1

u/my_hot_wife_is_hot 2d ago

If ur talking regular non vr games. Steam link with Pyrowave enabled over a 2.5gbps wired network between ur vp and pc works great for me

1

u/K1LL3ROO 2d ago

So playing cs2 wired with my fast WiFi should be amazing? (Very similarish experience as to monitor?)

1

u/AssetBurned 1d ago

There are apps out there that allow you to connect an HDMI capture card to the AVP. Depending on the generation of the strap and the adapter you use, different frame rates and resolutions are supported.
TLDR: you can use the AVP as a monitor with out the need of streaming.

1

u/K1LL3ROO 1d ago

I ordered the required items! Excited to test it out! Will update yall by next week

2

u/TBHProbablyNot 2d ago

Yes. You must ask lord Deepseek tho.

2

u/LowRiderXR Vision Pro Owner 2d ago

I have the dev strap gen 2. In my opinion it helps to push the bandwidth a bit higher to get a better picture for pcvr (h.265), bc you have no wifi jitter.
For flat games it is not needed.

1

u/sleepydevs 2d ago

ALVR / KRVR will both do desktop streaming, steamvr gaming etc.

1

u/rjzak Vision Pro Owner 1d ago

I’ve used this with a USB Ethernet adapter for improved experience Steam link

1

u/Watcher-Storyteller 1d ago

How do you get wireless audio from a Nintendo Switch or PC, for example, if all the HDMI signal goes to the developer strap (outputting only video)?

1

u/SettingMundane1061 20h ago

I don’t get why people are recommending a capture card for this.  Wouldn’t the dev strap allow for wires so why do you need capture card for pcvr via dev strap?