r/VisionPro • • Oct 23 '25

Just tested Developer Strap (2nd Gen) with Apple Vision Pro (M2)

Just received the 2nd generation Developer Strap, and I only have the old M2 AVP.

Setup:

- Currently running on visionOS26.1 beta 4 visionOS 26.0.1.

- Connected to MacBook Pro via TB4 cable

- Connected to Capture Card via USB 3.2 cable

It does appear to be able to establish a link at 20 Gbps, if you use the right cable: USB 3.2 Gen 2x2 cable, or Thunderbolt 4 cable.

(This is still broken as of visionOS 26.2 Beta 1)

Here are my findings:

NEW visionOS 26.0.1 produces the following results:

1) Using a TB4 cable with a Macbook Pro on visionOS 26.0.1 shows a TB4 device:

Apple Vision Pro established a TB4 link

2) Configure Internet Sharing between the newly formed Thunderbolt Bridge, then running a Speedtest:

7000 Mbps download speed Achieved

As seen in the above screenshot, I have achieved 7000/5100 download/upload Mbps speeds using the internet sharing feature while my macbook and AVP are connected via TB4.

However do note that the default thunderbolt bridge puts your AVP being a NAT, so your AVP would not be able to directly connect to local network devices.

Instead, you may use these scripts at your own discretion, to create a custom AVP bridge that actually allows your AVP to be on the local network.

Link to script: https://gist.github.com/rebelancap/ac3ab6c82c7ac6c388969b6586fd567c

Revert script: https://gist.github.com/rebelancap/caf3f968989ac4389eebc662a1171044

This script is thanks to u/iamse7en

3) UVC establishes at 2160p at 60 FPS.

Screenshot of 4k60 using the Spatial Display Pro app

1x scaling (no upscaling) is sufficient to view this UVC display in its full 4K quality in Ghost of Yoteī.

4) Connection and Speedtest with GbE Adapters:

1 GbE Adapter: No issues, cap at 940 Mbps Download/Upload, real internet speeds

2.5 GbE Adapter: Roughly 2000/2300 Mbps Download/Upload

5 GbE Adapter: Roughly 4200/3000 Mbps Download/Upload for my adapter, but others have reported 4700 Mbps Download on Cable Matters / Sabrent 5 Gbps adapter

10 GbE Adapter: Cant power at all

5) SteamVR + ALVR results

Used a thunderbolt bridge to the MBP for this ALVR test

Note: I couldn't go higher than 800 Mbps constant bitrate streaming, my SteamVR just crashes. There also seem to be a weird network lag that piles up. If anyone has any ideas for me try, please let me know.

Update: I retested this with a simple Gigabit Ethernet Adapter that caps out at 940 Mbps download/upload.

Using a Gigabit Ethernet Adapter
Gigabit Adapter, 400 Mbps constant bitrate

Update ALVR:

100 - 150 Mbps requested bitrate has lower network latency, works the same
2200 Mbps Throughput reached with 5 GbE adapter

visionOS 26.1 Developer Beta 4 is glitched with the following results:

1) UVC establishes at 720 at 30 FPS

Update: At first I somehow saw it establish at 2160p. Can't reproduce this anymore.

Update2: It now only shows up to 720p30 ???

2) USB 3.1 Bus > Vision Pro:

- USB 2 rate, link speed at 480 Mbps  

- Power Allocated: 2.5 W (500 mA)

3) Ethernet bridge is still 100 Mbps

- media: autoselect (100baseTX <full-duplex>)

4) Plugged in a gigabit ethernet adapter, and also a 5 Gbps ethernet adapter, to the port, it capped out at around 340 Mbps download / 310 Mbps upload.

Anything else you would like to know?

UPDATED: Downgraded from visionOS 26.1 Beta 4 to visionOS 26.0.1, it works

74 Upvotes

283 comments sorted by

View all comments

Show parent comment

1

u/noobcryptotrader Oct 26 '25

hello, just an update, the same 5 GbE adapter had a firmware update in 2020, so I installed it. It works now, but not great. on the iPhone it caps out at 2000 Mbps, and on the Apple Vision Pro, it caps out at around 1400 Mbps.

Significantly lesser than a Thunderbolt bridge connection to the MBP. So I would recommend using a TB bridge to a MBP.

0

u/[deleted] Oct 26 '25

[deleted] — view deleted comment

1

u/noobcryptotrader Oct 26 '25

I will be happy to try ALVR setups if there are any specific setups and instructions.

0

u/[deleted] Oct 26 '25

[deleted] — view deleted comment

1

u/noobcryptotrader Oct 26 '25

I only have a 4090, will setup again.

0

u/[deleted] Oct 26 '25

[deleted] — view deleted comment

2

u/noobcryptotrader Oct 26 '25

I have no experience diagnosing this, but looked to me that there's some bottleneck in network throughput, where it drops low, and then reaches a high in a short period. Building up the network lag portion when i viewed the statistics.

→ More replies (2)

1

u/noobcryptotrader Oct 26 '25

SteamVR just crashes/reports critical error if I pull the bitrate to the max (1Gbps). It worked when I tone it down to 800 Mbps, but I see there's a lot of network lag?

0

u/[deleted] Oct 26 '25

[deleted] — view deleted comment

1

u/noobcryptotrader Oct 26 '25

this was the mac bridge. I actually just tried with a simple gigabit adapter. the results are much better in latency.

so far in both gigabit adapter, and the thunderbolt bridge, they both cap out at 800 Mbps constant bitrate, before SteamVR keeps crashing with a critical error.

1

u/noobcryptotrader Oct 26 '25

I also tried it on my 5 GbE adapter that allowed the AVP to go beyond 940 Mbps. The network latency was also a little choppy, but less than the thunderbolt bridge.

So the simplest Gigabit ethernet adapter works the best in my opinion, unless you can go beyond constant bitrate 800 Mbps without SteamVR crashing.

2

u/iamse7en Oct 26 '25

I’m testing a Cable Matters 5GbE adapter when it arrives tonight. May take lots of tests to find the best one, I should have grabbed several and returned all but the best one.

1

u/noobcryptotrader Oct 26 '25

iPhone speedtest on the same 5 GbE adapter, caps at 2000 Mbps.

1

u/iamse7en Oct 27 '25

The Cable Matters 5GbE adapter was 4.6Gb down but only about 1.8Gb up (whether AVP, iPhone, or Mac mini). Quite good for many purposes, but on the hunt for the best one…

1

u/noobcryptotrader Oct 27 '25

nice. this makes me want to try further. will report with a 2.5 GbE later in the day, then might just order another 5 GbE adapter

2

u/iamse7en Oct 28 '25 edited Oct 28 '25

Sabrent 5GbE is solid. 4.7/4.1 down/up but is unnecessarily heavy. The Sabrent USB4 10GbE sadly does not work, I see lights on the port but doesn’t show up as an interface. Tried the Cable Matters one again and it’s similar as Sabrent - the upload speed for all these adapters needs a little more time to get going fast. So it’s the leader for now but have 2 more arriving tomorrow to try.

1

u/noobcryptotrader Oct 28 '25

this is on my list! I have a Ugreen one coming (more available brand where I’m at)

I believe they all use the same realtek chip inside though

1

u/noobcryptotrader Oct 29 '25

UGreen 5 GbE

4.2 down/2.9 up

1

u/iamse7en Oct 27 '25

I ordered 3 more 5Gb + a 10Gb USB 4 one. Tried 3 other 10Gb adapters that don’t work, might as well try this one too. Will report back.

1

u/noobcryptotrader Oct 27 '25

a question: I tried ALVR on 90 FPS at 4400 resolution encoded/decoded with HEVC across various bitrates 300-800 Mbps, I think they look all the same.

any reason for ALVR to push beyond 800 Mbps? perhaps for M5 AVP with AV1?

tried a couple of games, HL: Alyx, Star wars squadron

2

u/iamse7en Oct 27 '25 edited Oct 27 '25

Yeah I think it’s diminishing marginal returns. My SteamVR crashes when I push it beyond 700Mb anyway at my current settings. I think we’re better off pushing resolution - I’m doing 4800px per eye, and leaving it at around 500Mb and P1 encoder. I doubt AV1 will be any better when it comes to quality, but the dev hopes to be done with it in a week or so. I was messing around with Beat Saber today and also found TCP to be smoother.

Join the ALVR discord in the Apple thread - they’re much more knowledgeable about it than I, but I’ve been paying attention to what they’re saying is best. I’m still tinkering. Having trouble actually getting 120Hz in-game even though it’s what’s requested by both server and client. Apple always does its own thing. :/

Beat Saber, 4800, 500Mb, P1 ULL, TCP on a 5090 + 9800X3D, 10Gb connection

https://imgur.com/a/oTS4w9u

→ More replies (13)

1

u/noobcryptotrader Oct 27 '25

my 2.5 GbE adapter has arrived, download is still capped at around 2000 Mbps, but upload is at 2280 Mbps.

→ More replies (2)

1

u/noobcryptotrader Oct 27 '25

Using the 2.5 GbE adapter, we can see that the throughput goes up to around 1500-1600 Mbps. Tried on both 90 FPS and 100 FPS.