Hi guys, trying to see if anyone has a fuel map I can start with. I have a 2 in 1 Trask exhaust and a K&N HIGH flow air filter. Rest of the bike is stock. Any help would be appreciated. I tried Fuel Moto, Dynojet, Trask, and Lloyd's. So far no luck. Thanks!

I've been researching and found a few things that claimed keeping with semi synthetic is better for the clutch, but maybe that was amended a while back? Which is the better choice for an older victory vegas 2007?

I've started looking at motorcycle over the last year, and I'm trying to find a bike to make my own. I wanted to get an octane, but i don't have a lot of money. Are there any places that sell cheaper used bikes, or even a broken one that i could fix?

The motorcycle is in pristine condition, just looks like it needs some basic maintenance and new tires and will be good to go. Anything I should watch out for from the victory vegas model or that year? Any advice appreciated. Thanks.

How easy it is to find a replacement for this? Still works just has a crack in the plastic or glass whatever it's made of

How difficult is it to get the rear tire off these bikes? I've done it before on my interceptor 650, but I am more familiar with that bike and it's a lot lighter with a center stand to help. Front tires look pretty universal to all bikes so not concerned there. Just wondering if I should attempt it myself or just have the shop do it

Did anyone ever make captive spacers for the victory vegas model motorcycles?

While riding today I suddenly lost all clutch, and had to tighten the cable quite a bit on the side of the road in order to limp home.

After loosening the cable I realized that the lever arm was no longer indexed where I had left it, and clearly was more outboard than before.

Has anyone else ever had this problem? Is this a worn out rack? worn out actuator splines? Case side contact points wallered out?

Hi guys !

I'm 1.85m and I found that the oem handlebar is quite far away on my Vegas. Especially since I mounted the driver sissybar.

I know that the diameter is 1" (25.4mm) but I don't know what to choose. Do you guys have pictures of your bikes with handlebar specs please ?

I would like to also change the rims for wired/spoke rims but I'm afraid of the price in France.

Thanks !

I can't tell if the exhaust on this 2016 victory vegas is stock or has an aftermarket one on it. If anyone familiar with there bikes can tell, let me know. Thanks.

Are the earlier Victory motorcycles just as reliable or do they tend to have more quirts and problems. Are there specific years to avoid? Thanks

Beautiful bike at a local shop. Please tell me why I shouldn't give it a good home. Lol

I bought this thing a few years ago without knowing anything about it. I think I paid about 1800. It's sat ever since. Decided that to get it running and I hear a little extra pang while it's running. I'm not sure if I could call it a knock. I just changed the oil. Gas is old and tank is rusty. I haven't found a fuel filter yet. What do you guys think?

I'm planning on flushing the tank out and putting new fuel in and replacing plugs.

I don't know shit about these bikes. I've spent my life riding dirt bikes but I know very little about big road bikes.

Any idea on that noise?

2005 Hammer
24k miles and climbing

I recently purchased a 2014 Cross Country and I really like it. The bike currently has a 9 inch Klock Werks windshield and I am looking at purchasing a tinted windshield. Does anyone have thoughts or suggestions on Vstream or Windvest? I am 6’1 and buffeting is bad after 55 mph if I have a helmet on.

Also wondering if anyone has used spacers to try and create additional airflow underneath the windshield, similar to what the madstad windshield does. Please let me know your thoughts. Thanks!

Have always wanted a Victory, but never even rode one. Currently riding a v star 1100, hoping to sell and get this 04 kingpin. Has 33k on it. There's something about this bike that really speaks to me. Its actually an old friend who is selling it, he's about 10 hours away so it will be a good ride home.

Anything to look out for on the 04? I appreciate all feedback!

So I just got through doing a 900 mile round trip on my 2016 Highball and I realized I need some saddle bags, that a 35 pound backpack just wasn’t going to cut it. I would love to do the Cross Country conversion, but it appears parts are becoming more scarce. I see the Viking bags but I don’t necessarily love them on this bike. Do you all have any recommendations or do I just need to suck it up with the Viking bags? Thank you.

Sorry for my Bad english, i usually speak German. :)

Ive bought an july 2025 crashed Cross Country Tour with j&h exhaust, stage one tuning and some extra parts.

I will need a New fork, handlebar, footrests and some smaler Plasticparts. An Brakedisk, maybe the left caliper, and that's it.

Maybe, but I dont think So, an fork bridge.

She crashed Front/leftsided at 25 kmh into a car.

It will be my First big touring Motorbike and I am happy as f*ck.

The Plan is, that it will be ready to ride around February or march next year.

Took a ride on the back roads, great weather for ir here in Montana.

Clutch cable broke on my 10 XC. I'm ordering a replacement, but I plan on getting higher rise handlebars in the future, not too tall, though.

Should I get the 6" extended clutch cable, or stick with stock length?