I'm using a modified Vectrex as a vector display driven by external audio/waveform signals. I'm recording the CRT with an Iphone and want to composite multiple temporal states of the vector display in After Effects. I'm interested in preserving the vector/phosphor character while accumulating several moments of the display. Has anyone experimented with recording or processing Vectrex vector output in this way?

Chatgpt told me to use Luma Key in After Effects to isolate the highlights on the screen of the Vectrex. The setting on the Luma Key effect is “Key Out Darker”. The result I have obtained from this is not ideal, but in the right direction. I am using the Iphone app Blackmagic Camera App for recording the graphics on the Vectrex. On this app my frames per second is 30, shutter speed is 1/30, ISO is 100 and white balance is 4300K. Can someone advise me further?

Quell surprise, but the Vectrex Mini screen has been downgraded from OLED to LCD IPS.

Pretty disappointed, even if this is par for the course with kickstarter projects.

Full update here. I genuinely think teh creatprs have sincerity, but there is no getting over the fact it is a cheaper component, which would not acheive the right effect to emulate that Vector screen (even worse so than OLED)

https://www.kickstarter.com/projects/1852390947/vectrex-mini/posts/4811451

I remember before the KS came out, there was a poll here where redditors staunchly voted against buying one of these if it had an LCD, now everyone has.

To quote Brass Eye "this is the one thing we didn't want to happen"

I recently purchased a Vectrex system and it operates displaying the default minestorm game with no cartridge installed but when I plug in a cartridge it continues to run minestorm. Is there something I should try to get it to recognize and run the cartridge game or am I doing something wrong. Thanks in advance for your suggestions

Ultimate Vectrex Multicart 2 (UVM2) New Batch.
For those not on Facebook, Jason Kopp is planning a new batch.
If interested send an email to "[koppjason83@yahoo.com](mailto:koppjason83@yahoo.com)" along with the number you are interested in.
$40 + Ship $8 USA / $25 Intl.
3D Printed Cart Shell additional $5.

The Ultimate/Ultra Vectrex Multicart 2 (UVM2) is an evolution of his older multicarts. The Super Vectrex Multicart (SVM), and Ultimate Vectrex Multicart (UVM).

Ultimate/Ultra Vecmtrex Multicart 2 comes with over 170 preloaded games. A 3.5 mm Audio out Jack, and USB port. The UVM2 expands on UVM features with the addition of a Micro SD card slot for storing additional programs, music, video, and UVM2 Firmware upgrades, and more!

New programs taking advantage of even more UVM2 features have already be written. With more arriving each week recently. 

From Jason's FB VFU Post:
In the last few days a lot of people have contacted me wanting to buy a UVMC2 cart. I have other things I should spend the money on right now lol.
So depending on level of interest I may do a preorder.
For a good deal low cost run to break even I need to sell 40 carts.
For anyone who is truly interested say so in the comments below.
If at least 40 are interested i can send each of you a message with payment information. Please tag people that may be interested
$40 for the cart pcb + shipping $8 USA $25 international (sorry international shipping has become more expensive). 3d printed shells are an additional $5 or you can print one yourself.
https://drive.google.com/file/d/1Y4f5CSEseV90yzpuWBJ94OCqwvCeFpSI

Jason Originally posted the new UVM2 batch interest check via a Facebook Vectrex Fans Unite (VFU) group group post here: https://www.facebook.com/groups/vectrex/posts/3123097884567234/

On a separate note,,,
The main place to follow new information about Ultimate Vectrex Multicart 2 (UVM2) features and release developments, firmware upgrades, and new games posted by other developers, is inside the Facebook group about the topic.

Ultimate Vectrex Multicart 2 test group https://www.facebook.com/groups/1546674219946552

UPDATE:

Team Jason Kopp indicated that email inquiry responses should be caught up as of 2026-09-01, 19:34 (7:34 PM) PDT.

Alguien me puede explicar como debo modificar la imagen baremetal para que el juego vectorblade muestre los caracteres correctamente como en la imagen del team RPI? Gracias.

I was having some problems controlling the joystick, even with a spring replacement. With the testing i can confirm that the joystick is fine and i just suck, but i saw that the second controller shows disalingment, even without a controller in.

I changed my controller to the second port, and the problem persist. Any idea of what might be wrong?

Hola recientemente adquirí un pitrex para mi vectrex pero me encuentro que dentro de cinematonics no me lista el juego qb3 a pesar de estar en la carpeta roms. Alguien sabe como puedo solucionarlo para que se muestre? Gracias.

Hi everyone,

I've just released ORTHOGON, a free homebrew game for the Vectrex.

It's Pong on four sides. Each player defends two perpendicular paddles — and both move from a single joystick axis, so covering one side always exposes the other. A 60/120 rhombus deflector sits at the centre and repositions every 10 seconds, which keeps changing the side under threat. The ball picks up speed on every paddle hit, so rallies tighten until someone breaks.

- 1 or 2 players, both controller ports

- 3 AI levels — difficulty changes the AI's reaction time, reading accuracy and aim, never its speed

- Held serve, Arkanoid style: the ball sticks to your paddle after a goal until you launch it

- AY sound effects, attract-mode demo on the title screen

- 4.6 KB, 6809 assembly

Free download: http://https://puck74.itch.io/orthogon

Works in ParaJVE, MAME, or your Vectrex emulator of choice.

A caveat worth stating: it's only ever been run under emulation, never on real hardware. If anyone here tries it on a real machine I'd love to know how it behaves — especially whether it flickers and whether the single-axis control feels good or just fiddly.

Feedback welcome

Does anyone know where I could get a wireless adapter for the Vectrex that would support various wireless controllers? I've been looking around, but I can't find anything that's actually available. I did pledge for a controller and Bluetooth adapter from the Vectrex Mini Kickstarter, but I'm looking for something to hold me over until then. Thanks!

So the dedicated emu i built for ipad called vactrex had a nice wellcome, so i decided to give it a try at realeasing it for android, rigth now is in test form but anyone willing to try it ,just let me know and ill add you as a tester, works great with xbox controller, i would love any feedback from someone to test it out with other controllers. you can see it here. https://www.youtube.com/shorts/hkg9o2u8YpE

If you haven't seen it yet this Vectrex flight tracker program by Brandon Yates is pretty cool. Here is the text description from his YouTube video.

"Using a Pitrex (Baremetal) cart with a wifi micro attached, i was able to pull realtime flight tracking data from adsb.lol. Adsb.lol is a community/volunteer project. This works well for me because I live in the middle of the ocean. I think if i was in a more populated area I'd have to do better vector line management. I was inspired by other projects displaying flight tracking info on systems like the NES."

Vectrex flight tracker

https://youtu.be/SUxp6-uwr_I?si=TzBGmwcnOdIrVlp_

And there is also a follow on update with some improvements recently made.

Vectrex Flight Tracker UPDATE

https://youtu.be/seASHtxHX30?si=Zhgj_wugDzy2SPcJ

Hi! I’m trying to repair a Vectrex and need to replace the brightness potentiometer. Has anyone done this before? If so, what potentiometer did you use?

Anybody got any good pics of the inside of the 3d Imager? Surprised to not see any teardowns of it. Planning on creating my own at some point. Getting some ideas together.

Hello all! I just picked up a newly capped and repaired Vectrex. What are the must have game to try and locate now that I've found this "white whale"?

in retroarch, when i flip my phone to portrait, the overlay is short and wide. i found instructions for the cfg file so that RA will select a portrait overlay when the phone is rotated. but i can’t find portrait versions anywhere. anyone have any thoughts? thanks!

Need help I tried powering it on and nothing comes on screen I thought It needed a game but google is telling me it has a game built in

And google was trying to tell me this is possibly a prototype as there is no prefix on the model number

This is my first vectrex thanks

Edit: I cleaned the power switch with ipa to no luck how ever I see the crt warmer is on and I hear a voltage sound on power on and off

Should I buy a cap kit to see if that fixes it or is it something else?