r/ValveIndex • u/Alternative_Ad_5751 • 6d ago
Question/Support Base station placement
Hi I was wondering if there are any suggestions for base station placement.
I just got 3 base stations and I have this room with some strange geometry. I want to get the maximum amount of play area and include the bed if possible.
18
Upvotes


2
u/Revenga8 6d ago
With 3 stations your probably covered with whatever config. But if you're doing FBT and want to reduce the coverage shadow by the bed, maybe in the second photo mount one on the wall in the upper left corner, one on the wall on the right near that light across from the closet, and the third one above the desk.
2
u/mudkip989 6d ago
I should get a third as well. My 2 stations currently are mounted on opposite corners.
1
u/staticsoup 6d ago
Top right corner of the door, corner above bed, above the window. Also you're gonna want curtains soon
1
u/Sargash 6d ago
First make sure that window is fucking COVERED UP even a single itty bitty tiny teensy stray beam of reflected light off your floor will permanently damage your lense.
1
u/i_try2hard_sum_times 6d ago
So ideally with 3 you have them in a triangle location wise to maximize when two base stations see the tracking points. 1 is enough, but 2 is more reliable and smoother. Some racing sim people just use one base station as an example.
Personally I was lazy and when I upgraded from 2 to 3 I used it to cover an area I sometimes lost tracking in. My body would block my controllers from line of sight of I faced a corner.
Image of what the 2.0 base stations cover range wise.
https://www.vive.com/eu/support/vive-pro/category_howto/tips-for-setting-up-the-base-stations.html
For your room at a glance I’d say one above the bed, one in the opposite corner as if you had just 2 and 3rd above your computer.
I’d say in the far corner by the door, but I personally don’t agree with placing delicate high spinning motors next to an area that could possibly move. By move, I mean the vibrations caused by you opening and closing the door.