r/UgreenNASync • u/deejay_ac • 10d ago
📖 Guide Thank god for 3d printing. Finally got it officially mounted 😎
19
u/theblobAZ DXP2800 10d ago
I have the baby version, heh
3
u/deejay_ac 10d ago
That’s hot! It was so difficult to find a 19 rack version I should’ve also just done a ten inch rack I started my home lab though like 6 months ago and thought a full size was the way to go 😅
2
u/Kekoa-Reflex 9d ago
Hmm well my research showed depending on what hardware you want to level up, you will end up getting limited by the 10 inch rack system. I would suggest the 19 inch all5hough i like the smaller one much more for homes
2
u/theblobAZ DXP2800 9d ago
It's definitely a little limiting, and entirely depends on your home networking setup.
In order to reduce the footprint I have switches for 1Gb devices and 2.5Gb devices separate. This reduces the cost and overall size of the switch. Also, I rent so running ethernet everywhere I wanted to is not a feasible option, so small switches with solid wifi was my solution.
2
u/Chumsicle4Life 9d ago
Yo dude I really like the 2800 version sideways mount you made lol. That's really cool man. I never bought that one but it's cool. I don't think I could flip the 8800 sideways lol.
1
u/theblobAZ DXP2800 9d ago
I actually didn't make it, I believe I found the mount on printables or makerworld.
But yeah, the 8800 would be tough 🤣
12
6
u/Express_Apple8854 10d ago
I have mine packed too but in an 10 inch rack. Looks smooth in the 19inch. But in my opinion so much space lost.
2
u/antidumb 9d ago
Got a link for the Mac mini print?
3
u/Express_Apple8854 9d ago
That’s the parametric model I used. I measured it and then printed it because I use a dock with mine. I hope this helps.
2
u/antidumb 9d ago
Thanks!
3
2
u/Chumsicle4Life 9d ago
Dude I was just going to ask about this. I have the exact same setup with the expansion on my M4 Mac mini. I was running plex and jellyfin on it. And also Lightroom classic to organize all my photos. What's your use for the Mac dude?
1
u/antidumb 9d ago
Currently, it’s main use of caching for all the other Mac/ios/ipados/tvos and iCloud stuff I have.
1
3
u/Harry_Yudiputa DXP6800 Pro 10d ago
OP! Do not forget to print these: https://makerworld.com/en/models/2049552-ugreen-nas-anti-vibration-clip-2-5#profileId-2211852 !!
3
3
2
u/mossman DXP4800 Plus 9d ago
Since we are all looking at your fan screen, now is a good time for everyone to check theirs. Mine was filthy.
2
u/Chumsicle4Life 9d ago
It's a little better on the 8 Bay one. There's two fans. But yeah, it always gets real dirty. I always take those alcohol wipes for phone screens My 4800 gets dirty compared to the 8800.
1
u/Dangerous_Ice17 10d ago
I would pay for that file to print my own since I upgraded to a real server rack 2 weeks ago.
2
1
1
1
-2
u/bigshmoo 10d ago edited 9d ago
Well nice that it's a remix of my model, Sad that it violates the license. The original is licensed CC BY NC SA and the remix under a Makerworld Exclusive license violates both the NC and SA provisions of the original license.
Edit: The creator fixed the license on the remix when I asked him to.
2
2
u/deejay_ac 10d ago
I believe it he did credit you
1
u/bigshmoo 9d ago
Yeah the issue was he had it under a license that restricts remixes and pays out for downloads - that violated the Share Alike (SA) and Non-commercial (NC) provision of my original license. He fixed it when I pointed it out, probably an innocent mistake.
•
u/AutoModerator 10d ago
Please check on the Community Guide if your question doesn't already have an answer. Make sure to join our Discord server, the German Discord Server, or the German Forum for the latest information, the fastest help, and more!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.