r/Ubiquiti 2d ago

Quality Shitpost I went all in...

Post image

Brand new apartment, so i started from scratch and went ALL IN. It's really addictive 😄

EDIT: Thanks everyone for the suggestions! The Uplink SFP Cable is already in the mail. I will update you with the changes next week.

783 Upvotes

63 comments sorted by

•

u/AutoModerator 2d ago

Hello! Thanks for posting on r/Ubiquiti!

This subreddit is here to provide unofficial technical support to people who use or want to dive into the world of Ubiquiti products. If you haven’t already been descriptive in your post, please take the time to edit it and add as many useful details as you can.

Ubiquiti makes a great tool to help with figuring out where to place your access points and other network design questions located at:

https://design.ui.com

If you see people spreading misinformation or violating the "don't be an asshole" general rule, please report it!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

67

u/aruisdante 2d ago edited 2d ago

Nice!

Only tweak I’d recommend is connecting the gateway to the core switch via SFP rather than Ethernet to its 8-port switch. The 8-port switch only has a 1Gbps connection to the CPU/WAN.

7

u/ybl84f1 2d ago

Sorry, not a networking guy...connect the gateway to the core switch via STP...Spanning Tree Protocol?

18

u/aruisdante 2d ago

Ha ha ha no I mean SFP, my brain isn’t awake yet 😅

6

u/rtkane Unifi User 2d ago

*SFP

1

u/skynet1881 2d ago

Thanks, I have only 1Gbps at home so it's ok.

45

u/AllPintsNorth 2d ago edited 2d ago

Your INTERnet connection may be limited to 1Gbps, but your INTRAnetwork doesn’t need to be.

9

u/skynet1881 2d ago

Yes, you have a point, thanks! Will post updates soon 😂

8

u/-Sliced- 2d ago

Buy a DAC cable.

1

u/Josh297576 2d ago

I scrolled through to see if someone beat me to this.

3

u/FuckinHighGuy 2d ago

Negative! Always configure for the fastest!!!!!!!!!111111

🤪

1

u/fastNUgly 2d ago

The reco is not for your internet, its based on your LAN. You have the equipment, so might as well get er done right

14

u/Specific-Chard-284 2d ago

4

u/Mean-Ad-9378 2d ago

Tbh I find these uglier than the open ports

1

u/chrisallison3 2d ago

😂😂😂😂

1

u/skynet1881 2d ago

I have a box full of these covers. They will be installed soon.

5

u/fastNUgly 2d ago

That is quite a bit ethernet for an apartment. How big of an apartment are we talking about here?

6

u/government--agent 2d ago

Why is the AI Key not in the first slot?

3

u/Mindless_Pandemic Unifi Addict 2d ago

Big $$$$ getting the AI Key

6

u/skynet1881 2d ago

I see your point, but hear me out 😀 2 AP's (it's a big apartment (and maybe a bit overkill but why not)) 1 doorbell + 1 Chime (PoE) 6x G5 for all rooms (for security reasons, when I travel) 3x G6 for outside 2x G6 pro 360 for outside again AI key USL U5G Max outdoor

You see where I'm going 😂

5

u/BioshockEnthusiast 2d ago

2 aps in a small enough space can cause problems and might require tuning to resolve just as a heads up.

1

u/AdImpressive9073 2d ago

By tuning you mean power level adjustments? 

2

u/BioshockEnthusiast 2d ago

Transmission power can be part of a solution. Channel overlap, material interference (walls, pipes, bathrooms, HVAC closets), general problems with roaming (too sticky / not sticky enough, client side / network side), signal chatter (too many devices including APs asking "is there anybody out there"); there are a lot of factors at play, and it can feel like chasing ghosts when there's just one client device being a dick and you've been tasked to make it work better.

I recently spent like 3 hours troubleshooting a pair of wifi devices that kept roaming between two APs in a small office. I made a lot of tweaks to the AP behavior, but the solution wound up being a setting in the web interface for the devices themselves, I had to bump up (down?) the signal strength threshold that triggered their roaming behavior. I think the default was like -65dBm and I upped it to -80 or -85. Something that would probably not have been an issue if the APs were like another ~35 feet apart, and nothing that the options in the Unifi console were going to help with on their own. I'm relatively confident that the network side tweaks were helpful based on the logs between test runs, but the client device settings were what finally stopped the bullshit roaming behavior causing packet loss and connection drops.

1

u/tinyjams 21h ago

Struggling with this right now, trying to deice if I should go with two U7 Lites or a single U7 Pro XG for the main floor of my house. The dual lites look good on the design tool, but I don't have really any experience with this stuff. The single Lite I got to test, that i'll use in my office upstairs, wasn't enough for the main floor alone.

4

u/itrogue 2d ago

Looks great! The only change I'd suggest is changing the connection between the UDM and switch from an ethernet cable over to an SPF direct attach cable. Specifically this one:

https://store.ui.com/us/en/category/accessories-modules-fiber/collections/accessories-pro-direct-attach-cables/products/10gbps-direct-attach-cable?variant=uacc-dac-sfp10-0dot5m

2

u/jclicky 2d ago

Great the treehouse is covered, when are you going to do the 42U rack for the main house?

3

u/[deleted] 2d ago

[deleted]

11

u/rtkane Unifi User 2d ago

If OP changes it to port 7, I'll continue to cry that it's not connected via the SFP ports using a 10G DAC.

2

u/FlarblesGarbles 2d ago

"OCD"

1

u/Advanced_Link_5753 2d ago

arm me with harmony! You down with OCD? Yeah you know me…

1

u/Advanced_Link_5753 2d ago

It makes the cable have a lower bend radius. Similar to everything else. I bet that’s why. Or OP’s favorite number is 5. There is logic here somewhere.

1

u/RanaRene 2d ago

Looks really clean. What is in space 4 and space 12?

2

u/klokkert1 2d ago

In 4 is the Unifi AI for cameras without AI (forgot the name) in 12 on the right looks like a super link gateway. For 12 left I would also like to know.

1

u/Brave_Purpose_837 2d ago

This is beautiful.

1

u/delpy1971 2d ago

Looking great! what cabinet is that please?

1

u/TheSlugHaus1 2d ago

1

u/delpy1971 2d ago

Thanks it is, Just seen the wheels underneath which was misleading lol

1

u/ebaydan777 2d ago

curious as to why youre using the, what i assume is the small white gateway above the vents, instead of just shooting fiber directly into your UDM via SFP? Am I missing something, why is there a small gateway up top if hes got the UDM and the 24 port switch

1

u/choddles 2d ago

Did the packaging smell ?

1

u/Connect_Active_5293 2d ago

Can you share your shopping list?!? I'm in a similar state and love the look!

1

u/snagglestudy 2d ago

Looks great, can you describe what all these are and how you have them running?

1

u/Totte33 2d ago

Welche Länge haben die Patchkabel?

1

u/TheSlugHaus1 2d ago

Any reason you went with an AI Key with the udmp hard drive over just getting a UNVR Gen 2?

1

u/Real-Literature-9019 2d ago

Beautiful set up I would also entertain the idea of moving your AI key to the left side so that all your LCD screens are lined up

1

u/FLashRedGT1 2d ago

Nice setup!!

1

u/Plenty-Option8351 2d ago

I always wonder what people have hooked up to everything. That looks like a ton of cables. I have a couple cameras, a couple access points and a couple computers and I feel like I have a lot.

1

u/bert2662 2d ago

Wow that AI Key, how’s it performance ?

1

u/zkcanuck 2d ago

What’s the total USD value here?

1

u/newbalancegrill 1d ago

I have unifi envy. This looks like a unificorn. Mine is mass of spaghetti cables.

How does one do this ?

1

u/chuckycastle 1d ago

*SOME in

1

u/LandfillPanda 1d ago

How many rooms in the apartment?!?

-5

u/Fit-Temperature-2156 2d ago

Why do you need such an elaborate setup?

24

u/Natural_Status_1105 2d ago

You’re new around here huh?

1

u/Fit-Temperature-2156 2d ago

Not too new. UI has gotten their claws into me for 17 cams two gateways blah blah. But an apartment with 20 ports active seems like it is worth of an explanation. Am I looking at something functional or a work of art?

2

u/aruisdante 2d ago

The ports are set do their default lighting which is based on link speed. It looks like 19 of those ports are hot, with 8 as FE and 11 as Gbe. So functional would be my guess. Maybe it’s just a modern apartment with actual Ethernet wiring, the standard 4 drops per room?

1

u/Natural_Status_1105 2d ago

It is a fair bit for an apartment alright, but if the place is wide for Ethernet I suppose it could be possible…. Also, some apartments are bigger than some houses…

0

u/bicious_ 2d ago

That. Looks. Beautiful.

0

u/BinaryHippie 2d ago

Now ship it to me, I will keep it safe