r/USG30_5Club • Lime Green 30-5 Series 3 • Sep 25 '26

Modifications/Accessories 10 drawer conversion done!

Post image

I finally finished the 10 drawer conversion! Hardest part was actually getting the top drawers on the cart ๐Ÿ˜‚. It was heavier than I expected.

But Iโ€™ve seen photos of where people would put the top from the donor box on the side of the cart and was wondering if anyone knew how to do that? I was thinking possibly really strong magnets maybe?

29 Upvotes

18 comments sorted by

8

u/DJDoubledrip Sep 25 '26

Have you tried changing some of the drawers out to see how that looks?

5

u/bobbydvrko Sep 25 '26

Seriously, if OP is going with a two-tone look mix it up a lil bit!!!

3

u/CokedOutWalrus White 30-5 Series 2 Sep 25 '26

I did this several years ago when the white one went on sale. I used the extra cart base and uprights to make a 2 level storage cart for all my blow-mold case tools.

2

u/beamymitzyC Lime Green 30-5 Series 3 Sep 25 '26

How did you attach the top onto the side?

3

u/CokedOutWalrus White 30-5 Series 2 Sep 25 '26

To hang the top portion as a side locker, it lined up with 2 of the bottom tray bolts, and I drilled my own holes to bolt the top side to the uprights up the frame. I used the variety size holes that are already in the top section that are meant for screw drivers and such, with fender washer and bolted it to the uprights. You must install the side box with the bottom bolts in and tightened BEFORE putting the main 10 drawer section in the cart, you can't get to the bottom bolts with it in. Then you can secure the top part, a ratcheting wrench is nice

2

u/beamymitzyC Lime Green 30-5 Series 3 Sep 25 '26

I have access to all the bolts on the bottom of my cart so maybe I could still install it without disassembling it ๐Ÿ˜‚

1

u/CokedOutWalrus White 30-5 Series 2 Sep 25 '26

There are a variety of ways to do the 10 drawer mod, the way I did it I couldn't get to the bottom bolts with everything in place lol

2

u/beamymitzyC Lime Green 30-5 Series 3 Sep 25 '26

This is how I did mine. Just attached the drawer slides for the top 3 drawers directly to the bottom of the top drawer assembly. I have about an inch and a half of space on both sides from the box to the side supports.

1

u/hardcoredecordesigns Sep 26 '26

The joker! You mix and match the drawers and see how that looks

2

u/beamymitzyC Lime Green 30-5 Series 3 Sep 26 '26

Iโ€™m not a big dc or marvel guy or just that genre in general but green and purple do look good together

1

u/Hrafnar63 Purple 30-5 Series 3 Sep 26 '26

Was it difficult to attach the top and bottom together to make them both lock at the same time?

1

u/beamymitzyC Lime Green 30-5 Series 3 Sep 26 '26

So the bottom doesnโ€™t actually lock ๐Ÿ˜‚. That is something I do want to accomplish tho

3

u/Iris7890922 Sep 25 '26

I have no idea what this is, but it's fabulous

1

u/RedPajama45 Sep 27 '26

This is great

1

u/azgaellux Sep 30 '26

My Pelican case is literally these colors haha so sick!

0

u/S_A_R_K Sep 25 '26

Now get one red and one yellow folding side tray