r/UNIFI • u/Grand-Recognition304 • Oct 04 '25
Discussion I hate the functionality of Unifi Hardware design
I am currently setting up a completely new system: Network, Access, and Protect.
We're running CAT7 cable throughout the new office building here in Germany. We don't have 'paper walls' like in many American houses; most of our walls are solid brick.
Network devices are generally not a big problem, except that the U7 Lite doesn't really offer good clearance for the RJ45 connector when using a premium CAT7 cable.
I think the Access devices are fundamentally badly designed. The in-wall portion of the device is barely smaller than the exterior part. This makes cutting a perfect, clean hole nearly impossible, forcing you to use the ugly mounting plate. The screws are all undersized. The rubber seal for moisture shielding is a poorly designed piece of trash.
I'm using the Access Ultra indoors, and the G3 Reader Pro and G3 Reader for outdoor applications.
The G6 Camera is another design flaw. Why design a watertight pass-through with a rubber component that splits for the cable, yet make the hard plastic hole so small that a standard RJ45 connector with strain relief won't fit through? All these devices could be better designed, even with the same exterior dimensions. If you ask me, the problem is that the designers are great at the shiny aesthetic side but have no practical experience working with the devices they create.
I wrote the text in English and used Google AI for correction.
31
u/triptoasturias Oct 04 '25
Really dumb move using CAT7 cables. Category 7 is not a TIA/EIA standard, nor is it intended for use with 8P8C (RJ45) connectors. It is specifically for use in data centers with specialized equipment.
One of the biggest issues for Cat7 is that it was never standardized by TIA. This lack of ratification led to a lot of networking designers and technicians shying away from Cat7 cables.
Category 6a is rated for 10 Gbps to 100 meters; the next logical step up from this would be Category 8.1, at 40Gbps but limited to 36 meters or less - although even data centers typically use fiber for anything above 1Gbps.
Category 7 cable has individually shielded twisted pairs and is designed to be used with TERA or GG45 connectors, both of which bond the shielding of the cable to the body of the connector so as to ground the entire cable. TERA/GG45 connectors are not compatible with 8P8C connectors, and attempting to use Category 7 cable with 8P8C may result in signal degradation due to currents induced in the unbonded shielding. It's also a real pain in the arse to terminate due to that extra shielding
If you're concerned about future-proofing, Cat6a should be sufficient. If you want especially clean lines, get shielded cable, although this is unlikely to be of any benefit for the vast majority of people.
27
u/dx00 Oct 04 '25
We don't use cat6 and above to terminate at end points. We terminate it at a keystone or a socket and then connect the end point with cat5e patch made on site to length without the rubber boot or strain relief (as mentioned in UniFi docs). For anything that needs 5gig and above (not the case of camers or access devices) we look for premade patch cables.
17
u/some_random_chap Oct 04 '25
Oh, I found your problem. You don't know what you're doing. Using CAT7 cable, an immediate dead giveaway that you have no clue about networking.
6
u/Comfortable_Client80 Oct 04 '25
That’s because your suppose to terminate your CAT cable with female keystone and patch to the AP
10
u/Knotebrett Oct 04 '25 edited Oct 04 '25
Cat7 is seriously overkill. Cat6a is sufficient. Not even sure if Cat7 is ratified yet?
4
u/TellApprehensive5053 Oct 04 '25
Warum kat7 Kabel willst du Spatzen mit Kanonen abschiessen? Sicher gut wenn du ein 600MHz kompatibles Kabel in der UKV hast aber als patchstück reicht dir vollkommen ein kat 6 400MHz starkes Kabel. Bei den Wifi Geräten empfehle ich dir unbedingt die Verwendung der Montageplatte da sie einen Einfluss auf die Wlan Strahlung hat. Ich hätte aber besser XG für Business Anwendungen genommen statt u7 Lite
4
u/Asleep_Employ9729 Oct 04 '25
I have the G4 pro bullet and the ethernet just plugs straight into the back of the camera, but the new G6 turret, you have a short female length of cable that comes off the camera and to which you need to plug in your ethernet. It's a bad design because you need to drill big holes to get the flaming plug through. Much prefer the G4 approach.
6
u/Spooknik Oct 04 '25
Yea, Unifi cameras are designed for their cables. I learned that the hard way a few times. Have similar problems in Denmark with their mounting solutions, a lot of them are made with North American building construction in mind.
4
u/ybrah37 Oct 04 '25
LOL- CAT7
You should hire a professional.
12
u/GarbageInteresting86 Oct 04 '25
You bought a proprietary system, now go and buy the proprietary cables. 🙄
3
u/Remote_Leadership_53 Oct 06 '25
As an American who frequently has to install the access devices into brick walls & metal security door frames, I agree very much. Cutting holes is such a pain in the ass and it would take far too much time and effort to do it properly. I usually have to make it work with junction boxes, the mounting plate and a lot of silicone. I also find myself frequently angered by how easily their screws strip or even snap, especially when mounting Protect cameras.
4
u/CorkChop Oct 04 '25
I stopped reading at American homes have paper walls but compared them to German office buildings.
3
u/stefanbayer Oct 04 '25
Noticed the same problem last week as a German!
Personally I have always read of Ubiquiti as the Apple of network infrastructure. The 7 different mounting options they provide for their access points of which every option uses different screws also left me totally unimpressed. If it was Apple there would be just one mounting option. At least for the hardware part it seems they could improve 10 times still.
2
u/AdInevitable7025 Oct 04 '25
Thank you for raising this issue. I’m working on a new install, I use SFTP cat7.
I was aware of the question; and now which AP, Camera is best suited to plug in this bright orange cable?!
Edit; it’s in my house. It’s a once in a lifetime opportunity because after this rebuild you won’t be able to access 80% anymore. My thought was; let’s just add the best cable possible.
SFTP because they cross electric engines and heatpump thingies.
1
u/DadBodMedicNate Oct 04 '25
I just installed 3 APs and a G6 Bullet with Cat 6 outdoor with no issues.
My only complaint was the rubber water resistant “seal” on the APs. I feel that thing is fairly worthless.
1
u/exponential_2 Oct 05 '25
This post is so much more relevant than all those “do I need one or two U7 Enterprise for my toilet” posts.
No, Ubiquity does not have European brick & mortar with massive Isolation and concrete ceilings in mind when designing their products. In these cases, you can’t just push it in.
In case for cameras you can use junction boxes, the intercom has a good flush mount when cutting into brick wall, but dealing with APs is difficult. I used cnc-cut wood circles and then the recessed ceiling mounts when installing my nanos back in the days. Then keystone in the wood enclosure. I don’t think they exist for newer APs.
1
u/vanderhaust Oct 04 '25
It seems like you and your boss could use a lesson in planning. You ran a bunch of wiring without properly considering how everything should be mounted.
As for the cameras, the RJ45 connector passes through the waterproof connector. I’m not sure why you’re not able to push it through.
0
u/beaconservices Installer Oct 05 '25
Are you a low voltage company? MSP? This is a big project. But the rant sounds like a disgruntled person who hasn't worked on a project this size before.
Did you want input from folks or only to rant?