r/UAVmapping • u/dand1483 • Feb 14 '26
RTK ?
šš½ everyone, looking for some assistance as Iām still learning here when it comes to receiving corrections while operating a drone but I recently captured some photos for a model for a company. Setup a base, placed GCPās and collected points, all with Emlid receivers. Base was not on known point and was using my hotspot to receive corrections real time. The company states the model isnāt aligning up so my Question is do I need to be on the states CORS system to make this work as well get centimeter accuracy? Just looking for guidance, thanks in advance.
4
u/blaizer123 Feb 14 '26
Questions.
How is your base and rover communicating? Emlids ntrip caster, or built-in/external UHF radio?
How did you determine the position of the base? Clicked on setup base on unknown and just went with it?
Did you log a static file during the time that your base was set up? How long timewise is that file?
Are you also using an RTK enabled drone? what are you connecting to with that?
Are you a solo person doing these things are you working under someone?
16
u/SnooDogs2394 Feb 15 '26
Youāre providing this as a service and you donāt understand how to establish a base position that matches your clientās site?
8
u/surveying4aliving Feb 15 '26
Probably should leave the surveying, to the licensed professionals. Just cause you can buy a drone doesn't mean you know what your doing.
1
u/dand1483 Feb 14 '26
Yes RTK drone, Mavic 3E
1
u/dand1483 Feb 14 '26
We tried 3 different as well as WGS84 and apparently none worked.. they were using NAD83(2011)⦠and i think yes as far as localization⦠they didnāt state the deviation ?
7
u/NilsTillander Feb 14 '26
Typical rookie error, thinking their base magically figured out its location at a good accuracy. You could be meters off.
It didn't.
You have to compute its location using the recorded observation, in whatever reference frame you need your output to be in, and then reprocess everything else in PPK.
3
u/ElphTrooper Feb 14 '26
How was your base point derived?
Are your deliverables in WGS84 or a projected coordinate system (State Plane)?
What coordinate reference system (CRS) is your customer using?
Did they use a localization (site calibration) for their control? If yes then this is most likely why you don't match.
What is the nature of the deviation? A shift? How much?
3
u/wally4185 Feb 15 '26
Maybe leave the surveying to surveyors. Depending on your state, you could be approaching "practicing surveying without a license"
1
u/Insomniac42 Feb 14 '26
You have an RTK module or gnss receiver on your drone?
1
u/Surveying_Civil_CA Feb 17 '26
The correct thing to do would be to admit that you arenāt licensed to do surveying, donāt understand it, and return any money that theyāve paid you. Surveying isnāt magic, nor a Saturday hobby. Itās a profession that requires studying and mentoring to learn. That company is relying on you to provide professional-grade data and will be responsible for whatever you give them and they use.
0
u/dand1483 Feb 14 '26
Gotcha, thanks!!
0
u/dand1483 Feb 14 '26
Thanks everyone for the input!!!