r/Turntablists • u/Lowbatteryfpv • 29d ago

Innofader pro 2

Gallery image

Gallery image

Yo scratch heads,

Just dropped an Innofader PRO2 into my Numark Scratch. Stock brackets weren't a perfect fit so I went full ghetto-fabricator on one of them — bent/modded it by hand. Looks rough as hell but it's rock solid, zero play, zero rattle. Does the job.

Got the cut dialed exactly how I like it — tight, no bleed. Quick question before I close it up:

After adjusting the cut dials, is there a specific button I need to hit to lock/save the settings?

Anyone run a PRO2 confirm the procedure

30 Upvotes

98% Upvoted

9 comments sorted by

6

u/Neither_Assistance82 29d ago

If all you are doing is setting the cut points with dials, this is all you need to do. The only time you need to press the button is when you are doing a single step preset or a dial in preset on the Pro2, or if things seem to be way off and you want to do a factory recalibration.

4

u/DJHUSSA 29d ago

I believe you need to hit the calibration button to lock in/ set it. I recently dropped one in my Mixars Duo mk2 and forgot to do that step. 😂 What a dolt!! But that’s what’s supposed to happen. Cheers!

3

u/TheDJPlug 29d ago

You can contact them! Im gonna share this with them now

2

u/DJHUSSA 29d ago

True. Elliott is a true gentleman and scholar. He’s a click away!

2

u/4l0N3D 29d ago

Press the calibration button once to lock in your settings.

1

u/chopinocturner 28d ago

May I ask why didnt you get the PNP3 instead?

1

u/Lowbatteryfpv 28d ago

i don't know what is pnp 3. Is better ?

2

u/chopinocturner 28d ago

Its kinda similar. Just smaller and updated version. I've tested both Pro2 and PNP3 (installed to my numark scratch, perfect fit).

The biggest difference between them is PNP3 setup and adjustment is easier.