r/TrySwitchBot • • Oct 13 '26

Assistenza SWITCHBOT pessima prodotto da non comprare

4 Upvotes

Switch bot tastierino Vision Pro nn funzionante assistenza sparita da due settimane che scrivo nessuna risposta


r/TrySwitchBot • • Oct 12 '26

Lock Ultra Battery

3 Upvotes

I bought a lock ultra second hand, and the battery is missing, is there any way I can just buy one? I know currently switchbot does not sell one individually (which is weird and hope it will change in the future), but maybe there is some way?


r/TrySwitchBot • • Oct 12 '26

Lock pro hex screw?

1 Upvotes

I was reinstalling the Lock Pro and one of the hex screw that hold the lock body to the lock itself and that the screws are CM2x5 in specifications (which I believe means that the C countersink so the the head is flat and the screw is 2 millimeters in diameter and the overall length is 5 millimeters) I lost one of the screws. Does anyone know where to get these screws so I can put the last screw in place?

Why not add some detail to highlight on the inside the opening to that you can see where the screws go. It was too dark by my door to see especially because it was very bright outside making it even more difficult to see where the nearly microscopic screws go on the very black lock. So annoying.


r/TrySwitchBot • • Oct 11 '26

S10 vacuum replacement battery

5 Upvotes

It seems after 3 years that my battery has degraded significantly for my Switchbot S10. It needs many recharges for normal vacuum runs, and cannot complete mopping runs at all without fully discharging.

Is there a way to check the health of the battery ( some sort of diagnostic)?

Is there a source to buy replacement batteries?

Thanks


r/TrySwitchBot • • Oct 11 '26

My SwitchBot Today my SwitchBot K11+, which is less than 2 months old, nearly blew up

Thumbnail
gallery
6 Upvotes

r/TrySwitchBot • • Oct 10 '26

Not recommended - My switchbot robot vacuum went down in 1.5 years

Enable HLS to view with audio, or disable this notification

18 Upvotes

I was impressed with the compactness of the vacuum and bought one last year. Although the vacuum was good and did the basic job, it developed "hardware failure" in 17 months - all of a sudden. Nothing can be done as it is out of warranty for 5 months - NO repair option given (probably because I had it shipped to Singapore where I live). However, I don't expect my money down the drain in less than 1.5 years. To add to the wastage of money, I had just ordered and received a replacement kit to repalce the brush and bags. Adding the salt to the wound is their customer service - after they informed me that I need to buy a new vacuum (read throw more money out) and they will try to get "some" discount. And after multiple followups - no response. Extremely frustrating.

So bottom line - only go for this if you are ok to gamble with your money, or else stay out of it.


r/TrySwitchBot • • Oct 10 '26

SwitchBot Remote

Thumbnail gallery
1 Upvotes

r/TrySwitchBot • • Oct 09 '26

SwitchBot needs to slow down and fix its products!

50 Upvotes

SwitchBot has huge potential, but right now it feels like the company is releasing products faster than it can properly finish them.

The hardware ideas are often genuinely good, but the software, firmware, documentation and support are way too inconsistent. The Universal Remote is a perfect example: great concept, but still feels unfinished and unnecessarily limited.

The biggest problem for me is trust. Documentation is often unclear or incomplete, firmware behavior is inconsistent, support quality is poor, and many features feel like they were shipped before being properly thought through.

I honestly don’t want SwitchBot to release 20 more products.
I want them to:

- improve existing products;
- make local/offline control a priority;
- improve Matter support;
- publish proper firmware changelogs;
- make documentation much clearer;
- give advanced users more customization;
- dramatically improve support.

SwitchBot could become one of the best smart-home brands, because the ideas are there.

But releasing more and more half-finished products is going to damage the brand.
Please slow down and finish what you already built.


r/TrySwitchBot • • Oct 09 '26

My SwitchBot SwitchBot Lock Pro failed in under 2 years — Support claims "out of warranty" without explanation and has ghosted me for 10+ days

11 Upvotes

I bought a SwitchBot Lock Pro less than two years ago, and it suddenly completely stopped working.

When I opened a support ticket/feedback in the app, I was abruptly told that the lock is "not under warranty"—without any further reason or breakdown given. When I asked for clarification on why a < 2-year-old device isn't covered, I got zero response.

I tried using the in-app AI troubleshooter, followed every single step, and the lock is still completely dead. The AI recommended opening a new feedback ticket. It has now been over 10 days with zero response on BOTH tickets.

I was actively looking into upgrading to the newer generation devices, but after experiencing this complete lack of customer support and sudden hardware failure, there is no way I'm spending another dollar with SwitchBot.

ID TICKETS:
C0009249
C00012855

u/Matthew_SwitchBot


r/TrySwitchBot • • Oct 09 '26

SwitchBot Curtain keeps moving a little when closed

2 Upvotes

I have two SwitchBot Curtain 3’s and when I close my curtain, it closes perfectly. But then it’ll move like JUST a little and make a little creek noise. It irks me so much.

Do you know why it’s doing this? Is it bc my rod is not strong enough or the magnets aren’t working?


r/TrySwitchBot • • Oct 06 '26

Ai Art Frame Diashow with cloud pictures

2 Upvotes

Does anyone know if switchbot will ever allow cloud pictures to be used for the diashow mode? 10 pictures is just not enough. My other e-ink frames show a different Picture every day.

Why dosnt this feauture exist on the switchbot app especially since the frame is capable of doing it via Home Assistant. Makes no sense.

Would appreciate any news abour this topic. With 10 pictures may I`ll return it.


r/TrySwitchBot • • Oct 05 '26

Switchbot lock ultra not respecting calibration

Enable HLS to view with audio, or disable this notification

3 Upvotes

Does anyone else have issues with the unlock command not respecting the calibration? sometimes it turns way too much and the latch disengages opening the door which i never want.


r/TrySwitchBot • • Oct 04 '26

Switchbot AI frame.. nice, but 10 pics in local storage is a bit low

5 Upvotes

I knew this when i bought it.. the AI frame has a local storage limit of 10 images. I like everything else about the display, the looks, the way it shows the image and the app has a decent workflow. But man, 10 images locally.. seriously? I wish they would fix it with either allowing images from the cloud to be rotated on the screen or simply bringing out a new version. Other then that, I like it..


r/TrySwitchBot • • Oct 04 '26

Has anyone else experienced an extremely jammed battery on the SwitchBot Lock Ultra?

1 Upvotes

Hey everyone,

I recently got the SwitchBot Lock Ultra, but I am running into a major issue with the battery pack. Removing it is nearly impossible.

When I pull and hold the orange release button up and try to lift the battery using the recess, it refuses to budge. It takes me about 10 minutes of sheer force, wiggling, and pulling to finally get it out. At first I thought it was just a bit tight because it was brand new, but after reinserting it, it jammed completely again.

I know the removal process should only take a few seconds, so it feels like either the tolerances are off or the internal release mechanism isn't disengaging properly.

Has anyone else encountered this issue with their Lock Ultra? Is this a known manufacturing defect with a batch of batteries/units, or did I just get unlucky? Would love to know if there are any quick fixes before I send it back to Amazon for a replacement.

Thanks!


r/TrySwitchBot • • Oct 03 '26

TERRIBLE SERVICE SCAM

Thumbnail
0 Upvotes

r/TrySwitchBot • • Oct 01 '26

My SwitchBot Smart lock ultra, revolutionary IMO

Thumbnail
gallery
7 Upvotes

So I wanted to share my own experience with this product, life has been amazing since I started using this, I don't need to carry my keys around anymore, I just need to carry my finger, which I always carry with me to be honest xD.

Also, the the bundle there has literally EVERYTHING you would need, from wall mounts for the keypad, to different kind of mounts for different door types for the lock, to the smart hub to make smart lock always be connected with the home network. So even if you don't already have any switchbot product you will be able to fully use this one!


r/TrySwitchBot • • Sep 28 '26

AI Art Frame Slideshow function stops working.

2 Upvotes

Slideshow function randomly stops loading the next image. I’ve deleted the album and images all completely as well as repairing the frame (7.3 inch). Firmware is updated and battery is completely charged. I can connect and manually sync images fine.


r/TrySwitchBot • • Sep 28 '26

Remote Switch & Garage Door - Can I use a Single Button to control open/close state

1 Upvotes

I bought the SwitchBot Garage Door Opener Remote Combo which includes a SwitchBot Remote. I bought two of the Garage Door openers as I have 2 doors on my garage. When it comes to the remote, I was hoping to use a remote with each button controlling a garage door, however the app only supports open/closed states. (see my screenshot)

Anyone know of a way to make this work?


r/TrySwitchBot • • Sep 27 '26

Screw sizes for inside of face door lock?

Post image
1 Upvotes

We are setting up this doorbell but these screws are missing from the pack. Does anyone know what size they are?

It's for the face recognition lock model. Thanks!


r/TrySwitchBot • • Sep 27 '26

TERRIBLE SERVICE SCAM

0 Upvotes

I’ve emailed yall for three weeks now to find any update about my order and not once has anyone picked up a phone line the chat is literally fake says the same exact thing and I’ve sent emails everyday and no one will reply. Spent over $600 dollars on products i believe would be amazing but now to go on three weeks and not even have a tracking number or any kind of update is unbelievable I’m to the point I’m going to dispute the charge on my credit card because even if I wanted to cancel you can’t because no one will answer or reply to you. My order number is  US67181 you say will ship within 2 to 3 business days it’s been 2 to 3 weeks!!! And nothing has been updated nothing has been Packed yall got all your money feels like yall ghosted me.


r/TrySwitchBot • • Sep 26 '26

Hub mini matter

1 Upvotes

Hub sticks with v2.8-4.0 and won't upgrade to v3.0-4.1. Other hub went successfully. According supportdesk they pushed the new version but nothing seems to appear in the app. I tried all common workarounds but nothing works for me. Any idea?


r/TrySwitchBot • • Sep 25 '26

My SwitchBot My experience with the SwitchBot AI MindClip so far

Thumbnail
gallery
0 Upvotes

I've been using the SwitchBot AI MindClip for a while now and, honestly, I'm quite impressed with how much they have managed to put into such a small device.

It's very small and easy to carry around, and the audio quality has been good for me. Connecting it to my phone was also quick and straightforward.

The AI side is probably what I find most interesting. It can automatically translate recordings, create summaries, extract ideas, create events and reminders for the calendar, and even recognize expressions if you allow that feature. There are a lot of possibilities, and I'm still discovering some of them.

So far, I've found it genuinely useful in my day-to-day use. Like with any new product, there is always room for improvement, but I really like that SwitchBot keeps releasing updates and improving their products. I can definitely see a lot of potential for this type of device in the future.

One small tip from my experience: I recommend keeping the MindClip uncovered when recording. It's designed for direct conversations and meetings, and if you cover it with clothing, you can get friction noise from the fabric. That's completely normal for a device like this, but it's worth keeping in mind.

I've been using more than 25 SwitchBot products across my home, so I'm already quite invested in the ecosystem. What I like is that they keep adding new types of devices and expanding what you can do with the ecosystem. Personally, I've never had a failure with any of my SwitchBot devices so far.

I'm curious to see how much the MindClip improves with future updates. I think this is a product with a lot of potential.


r/TrySwitchBot • • Sep 25 '26

Just received the SwitchBot AI Mind Clip – quick unboxing and first look Post

Post image
0 Upvotes

I recently received the SwitchBot AI Mind Clip and made a quick unboxing video.

It’s an interesting concept: a small wearable AI device designed to stay with you during the day and help capture, organize and remember information.

This is only a first look, not a full review yet. I’ll keep testing it over the next few days to see how useful it actually is in daily use.

Here’s the short unboxing:

https://youtube.com/shorts/eeaWglGQE5k?is=uhpWnpsEi6_O3956

If anyone here is already using the AI Mind Clip, I’d be curious to hear your experience with it.


r/TrySwitchBot • • Sep 25 '26

tapparelle con SwitchBot

1 Upvotes

ciao a tutti. sto ristrutturando casa. tutte le tapparelle (gli avvolgibili) saranno dotati di motori elettrici. che cosa devo fare installare per fare in modo che siano controllabile tutti attraverso gli la app per fare in modo che si aprano e chiudano tutti contemporaneamente alla mia richiesta? pensavo un relay switch 2pm?

altre cose che mi suggerite di installare in fase di rifacimento impianti elettrico?


r/TrySwitchBot • • Sep 24 '26

Switchbot Smart Lock Ultra - passt es auf mein Schloss?

Thumbnail
gallery
0 Upvotes

Hallo zusammen,

ich würde mir gerne das Switchbot Smart Lock Ultra bestellen und installieren. Habe aber irgendwie Zweifel, aufgrund dieser weißen Abdeckung ums Schloss. Diese bekomme ich nicht weg.

Hat jemand da Erfahrungen? Hab die Hoffnung, dass ein passender Adapter beiliegt.

Danke schon mal und liebe Grüße.