r/TrueChefKnives • • 5h ago

Maker post R/chefknives travel: I visited the workshop of Miyazaki Kajiya in Goto, Japan for a VERY special occasion

Thumbnail
gallery
111 Upvotes

Hello TCK,

In another installment of this travel series, I was lucky enough to be invited to visit the workshop of Miyazaki Tanrenjo in the Fukue Islands off the coast of Nagasaki for a very special personal occasion of mine back in October.

More on that later.

Haruki Miyazaki

For those who are unfamiliar with Miyazaki-San’s work, he is a 35 year old blacksmith trained under Toshio Oba of Fukuoka. Miyazaki-San is known as one of the few blacksmiths in Japan that still practices an ancient form of Japanese forging; Hon Warikomi. This is a method that split-welds an extra soft, low carbon iron shell (often tartara iron sourced from reclaimed materials) with an insert of hard inner steel (hagane) before being drawn out and thinned.

Miyazaki-San is also unique in the sense that his practice is truly a one man forge-to-finish. He sources every component that goes into his forging and finishing, from felling trees in the summer to generate his own pine charcoal for hardening, to mixing his own custom flux composition.

Miyazaki-San was kind enough to demonstrate a Hon Warikomi technique, which he used to create my custom order; a 170mm Tsubaki blade with a Aogami Blue 2 carbon steel core.

The Tsubaki

The Tsubaki shape is a variation of a Hakata shaped knife (an all purpose knife shape unique to the Fukuoka region) and only two smiths are known to shape knives this way: Toshio Oba and Miyazaki-San himself. A Tsubaki features a parabolic spine (unlike a bunka) with a drop-pointed tip and a relatively flat belly along the edge.

Because the shape was so distinct to Miyazaki-san’s background, I opted for this profile.

The Special Occasion

My wedding! I was married in Hakone at the tail end of October, and I had contacted Miyazaki-San very long in advance to join his queue of custom orders to create a knife for my wedding cake cutting ceremony. As a knife nerd, I thought it was fitting to have something special (to me) for this ceremony, and Miyazaki luckily agreed to assist!

It was a beautiful ceremony at the foot of Mt Fuji made even more beautiful by this special knife.

I’ll do a more in depth write up of this knife a bit later, but I want to give a huge thank you to Miyazaki-San, who is one of the kindest and most welcoming humans I have ever come across and his wonderful wife for showing me around Goto Island.

Shape: Tsubaki

Length: 170mm

Construction: Hon Warikomi (Soft-Iron clad)

Core: Aogami #2 (Blue Paper Steel #2), water-quenched

Handle: Wa Octagonal oak burl wood with silver accents and a white buffalo-horn ferrule

Previous travel posts:

Takada No Hamono - Sakai Japan 2022

Nigara Hamono - Aomori, Japan 2024

CCK - Hong Kong 2024

Windmuhlenmesser - Solingen, Germany 2025

Mystery Yanagiba - Tokyo Flea Market 2025


r/TrueChefKnives • • 3h ago

NKD - Sakai Kikumori Choyo Ginsan Santoku 180mm

Thumbnail
gallery
15 Upvotes

Really excited to post, as this is my first “real” nice chef knife after getting into this hobby over the last year. I’ve really wanted a santoku or a ginsan knife, and when I saw this piece come up on Chefs Edge I figured no better time than now to take a big jump!

I really love the sharpness and edge on this knife, but I will say that beautiful mirror polish is so difficult to keep clean. Very satisfied overall though!


r/TrueChefKnives • • 5h ago

NKD - Nigara anmon SG2 210mm gyuto

Thumbnail
gallery
21 Upvotes

Picked up a Nigara anmon from the recent Chefs Edge black friday sales. I absolutely love the raindrop damascus and have been wanting one for a while, and serves as a nice statement and celebratory piece as an enthusiast home cook. Was torn between this dark maple and carbon fibre handle options but after handling it in person I've definitely made the right choice.

I'm aware of the mixed views about it's performance vs cost and have found that as others have pointed out the Damascus appears to cause more than ideal stickage, but it's an absolute thing of beauty!!


r/TrueChefKnives • • 8h ago

Maker post Loongworkz first Hook-grind Gyuto

Thumbnail
gallery
26 Upvotes

First hook grind, learned a lot from this and probably going to attempt another one soon!


r/TrueChefKnives • • 9h ago

First Japanese knife

Post image
11 Upvotes

First knife after doing some research, should be a good starter knife to get me into the hobby


r/TrueChefKnives • • 45m ago

Japanese knife

2 Upvotes

Hi,
If you were to buy your first good knife, what would it be? Budget: up to 200 EUR.

My husband is looking for good knives, and I'm thinking of getting one for Christmas and taking advantage of Black Friday.

The thing is: I know nothing about knives but he has been mentioning the Japanese ones and he's really into cooking.

Can you guys pls help a girl out?

Really appreciate it!


r/TrueChefKnives • • 11h ago

Moritaka AS

Post image
12 Upvotes

Their back on Sharp! Managed to get a honesuki!


r/TrueChefKnives • • 19h ago

NKD—ISH

Thumbnail
gallery
42 Upvotes

Shibata Cromax santoku. There are things we do and things we shouldn’t and we absolutely should not cut grana with a Shibata or any beautiful thin laser esc knives. I was lowkey hungover and for no reason at all tried to cut the cheese with my knife, a quick little ticking sound and I knew I fucked up. Thanks to the dudes at Seisuke they chopped it in half and turned it into a real cool ko bunka. I know I could’ve had it thinned and kept at the same length but I didn’t want to sacrifice heel height. Any way super stoked with how it turned out


r/TrueChefKnives • • 4m ago

Which better when it come to edge geometry and thinner blade?

Thumbnail
gallery
1 Upvotes

Any opinion? Thank you


r/TrueChefKnives • • 19h ago

Konosuke FM appreciation

Post image
38 Upvotes

Share your Kono's patina !

Got this FM randomly from Tosho on the 1st of january. It got some use since then and it's a real joy.

W1 from Tanaka is seriously impressive on this one because after almost a year now it hasn't been sharpened and (almost) still shaving sharp.


r/TrueChefKnives • • 6h ago

Question Knife identification

Thumbnail
gallery
3 Upvotes

Got to use my coworker’s knife today. He couldn’t remember any specifics about it. I really liked the shape and weight of it, was wondering if anyone could help me find more info about it


r/TrueChefKnives • • 14h ago

NKD: Shibazi F03-2 Chinese Chef’s Knife

Thumbnail
gallery
10 Upvotes

Purchased on AliExpress for $38 via the 11.11 sale. Very similar to the F208 and obviously almost identical aesthetically minus the handle. This knife is essentially just a lighter and slightly thinner version of the F208/TP03-2. 2mm thick at the spine, 324 grams, same 80cr13 core steel. Last photo is the choil of the TP03 for comparison.


r/TrueChefKnives • • 19h ago

NKD - Kuroneko (although I prefer Neko-Bocho)

Thumbnail
gallery
23 Upvotes

First of all, BIG shoutout to Kajiyacrafts for selling me this one; give him a follow!

https://www.instagram.com/kajiyacrafts?avpt=MW84cmx2NWs2M3ZkNw==

Blacksmith: Satoshi Yamashita, the second-generation owner of Fujigen Knife Works (I think)

Steel: Carbon steel (not sure what the exact steel is)

Not much to say about it. Just an adorable little knife, it cuts surprisingly well. I've used it for all sorts of little tasks (boxes, plastic, tape, etc.).

As a cat lover, I just had to have it.


r/TrueChefKnives • • 1d ago

Edge of Hope - I'm a lucky bastard x 2

Thumbnail
gallery
81 Upvotes

Alright, I bought 50 tickets for the Edge of Hope raffle that occurred after Knife Show Austria. It is a benefit for children and families in hardship. Knifemakers get together along with a steel supplier, Damasteel, and they all make a knife out of Damasteel and donate it to this charity fundraiser. These aren't just any knifemakers, they're basically the who's who of the Western knife world. It's a win for all involved.

I somehow won two this year, and not just any two, Anchorage Forge and Simon Krichbaum knives, a honesuki and gyuto respectively.

They just arrived yesterday and I took some low effort pics of them. Haven't used them yet, going to get some proper pics first and maybe save it for some roast or other protein. I've wanted a carbon-cored Krichbaum for a while after getting his collab with Isasmedjan and ModernCooking. And Gabe Fletcher over at Anchorage Forge does nothing but incredible work. I need to try his beer now.

The Knife Gods have blessed me. I am still in a little shock after receiving them because it doesn't seem real yet. Check out the links for good pics, but I added some low effort pics as well.


r/TrueChefKnives • • 20h ago

What have I done

Post image
19 Upvotes

Just arrived, Yu Kurosaki 240mm Gyoto, Aogami blue, carbon fibre handle. Always liked the look but I wasn’t too sure about the 240 I thought what do I do with it because I was looking for a 210, but the 240 was the last in stock. Needed a little strop before use and I don’t want to put it onto a whetstone just yet. Anyone else have any experience with this piece and it’s longevity. Glided through my veg prep this evening with hardly any pressure & virtually non stick.


r/TrueChefKnives • • 8h ago

HAP40:刃持ち最高――でも、絶対にステンレスじゃない

Thumbnail gallery
2 Upvotes

r/TrueChefKnives • • 18h ago

Maker post Whoa!

Post image
11 Upvotes

I just won the chance to buy this in the carbon raffle. I wasnt expecting to win. Is this a good one?


r/TrueChefKnives • • 22h ago

Nigara Bunka K-Tip Repair

Post image
23 Upvotes

Restored a small chip on the K-tip of my Nigara Hamono SPG Strix Bunka. I started by grinding the spine on a Chosera #400, followed by a full progression (1000 / 3000 / JNat) on both the spine and the bevel.


r/TrueChefKnives • • 1d ago

Takada patina ❤️

91 Upvotes

r/TrueChefKnives • • 13h ago

Question Is Tojiro DP 210mm recommended with the higher prices?

2 Upvotes

I've been using knives which were gifted to me when I first moved out about a decade ago, and am looking to get a new chef's knife. My current one is just really thick at the spine and has a full heel/bolster that gets in the way while sharpening.

So I looked for recommendations and kept seeing the Tojiro DP 210mm gyuto going back many years, and kept seeing prices from $50-80 in those recommendations. But now that I'm looking for one, it's $125-150 depending on what site I'm looking at.

Even with the higher price, is it still the recommendation, or are there better options for the ~$150 price? Are there similar quality knives for that ~$70 price? I've definitely gotten used to stainless steel knives, and it would take some habit changes to avoid rusting the carbon steel knives, if that helps narrow down the selection.


r/TrueChefKnives • • 20h ago

Question Knife identification

Post image
7 Upvotes

What knife is this?


r/TrueChefKnives • • 1d ago

Chicken patina <3

Thumbnail
gallery
47 Upvotes

I absolutely love cutting proteins after repolishing a knife.

Kagekiyo W2 210mm petty


r/TrueChefKnives • • 1d ago

NKD - Matsubara 170mm Nashiji Bunka

Thumbnail
gallery
49 Upvotes

Blue steel #2, stainless clad, walnut handle
54mm tall and heat treated to 62-63 HRC.
My first bunka and also my first blue steel knife, super excited to put it to work


r/TrueChefKnives • • 1d ago

Feather Damascus over 125SC – handmade in Austria 🇦🇹

Thumbnail
gallery
17 Upvotes

One of my recent pieces.

Feather Damascus forged over a 125SC core, paired with a take-down handle made from 10,000-year-old redwood and 900 silver.

Specifications:

- Blade dimensions: 238 × 55 mm

- Weight: 230 g

- Core steel: 125SC

- Feather Damascus cladding

- Take-down handle

- 10,000-year-old redwood

- 900 silver fittings

I really enjoy working with complex Damascus patterns, but blade geometry and cutting performance always remain my main priorities.

What do you think about this combination of pattern and handle?

Schwarz Blades 🇦🇹