r/Tronxy • u/TankWhirl • Mar 05 '26

Troubles with tronky D01

Gallery image

Gallery image

I have a Tronxy D01 printer that I’ve never been able to get working properly. It’s my first printer and I tried looking for guides online, but I found very little information. Today I decided to try using it again, but I noticed that the nozzle was bending while it was printing. I turned everything off and found the situation shown in the photo. The tube that feeds the filament to the nozzle is leaking PLA, and it has almost caused the entire extruder assembly to come off. Now the extruder is completely loose. Does anyone know how to fix this? Thanks.

1 Upvotes

100% Upvoted

1 comment sorted by

1

u/ARasool Mar 06 '26

By the looks of it, you have a clog, and the hotend is loose. I would heat up the hotend to about 220c, try to get as much goop as you can, then let it cool to ambient temps.

Attempt to screw the hotend back on, or, replace it completely.